Names | |
---|---|
IUPAC name
Magnesium oxide
| |
Other names
| |
Identifiers | |
3D model (
JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.013.793 |
EC Number |
|
E number | E530 (acidity regulators, ...) |
KEGG | |
PubChem
CID
|
|
RTECS number |
|
UNII | |
CompTox Dashboard (
EPA)
|
|
| |
| |
Properties | |
MgO | |
Molar mass | 40.304 g/mol [1] |
Appearance | White powder |
Odor | Odorless |
Density | 3.6 g/cm3 [1] |
Melting point | 2,852 °C (5,166 °F; 3,125 K) [1] |
Boiling point | 3,600 °C (6,510 °F; 3,870 K) [1] |
Solubility | Soluble in
acid,
ammonia insoluble in alcohol |
Electrical resistivity | Dielectric [a] |
Band gap | 7.8 eV [2] |
−10.2·10−6 cm3/mol [3] | |
Thermal conductivity | 45–60 W·m−1·K−1 [4] |
Refractive index (nD)
|
1.7355 |
6.2 ± 0.6 D | |
Structure | |
Halite (cubic), cF8 | |
Fm3m, No. 225 | |
a = 4.212Å
| |
Octahedral (Mg2+); octahedral (O2−) | |
Thermochemistry | |
Heat capacity (C)
|
37.2 J/mol K [8] |
Std molar
entropy (S⦵298) |
26.95 ± 0.15 J·mol−1·K−1 [9] |
Std enthalpy of
formation (ΔfH⦵298) |
−601.6 ± 0.3 kJ·mol−1 [9] |
Gibbs free energy (ΔfG⦵)
|
-569.3 kJ/mol [8] |
Pharmacology | |
A02AA02 ( WHO) A06AD02 ( WHO), A12CC10 ( WHO) | |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
Metal fume fever, Irritant |
GHS labelling: | |
Warning | |
H315, H319, H335 | |
P261, P264, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P312, P333+P313, P337+P313, P362, P363, P391, P403+P233, P405 | |
NFPA 704 (fire diamond) | |
Flash point | Non-flammable |
NIOSH (US health exposure limits): | |
PEL (Permissible)
|
TWA 15 mg/m3 (fume) [10] |
REL (Recommended)
|
None designated [10] |
IDLH (Immediate danger)
|
750 mg/m3 (fume) [10] |
Safety data sheet (SDS) | ICSC 0504 |
Related compounds | |
Other
anions
|
Magnesium sulfide |
Other
cations
|
Beryllium oxide Calcium oxide Strontium oxide Barium oxide |
Related compounds
|
Magnesium hydroxide Magnesium nitride |
Except where otherwise noted, data are given for materials in their
standard state (at 25 °C [77 °F], 100 kPa).
|
Magnesium oxide ( Mg O), or magnesia, is a white hygroscopic solid mineral that occurs naturally as periclase and is a source of magnesium (see also oxide). It has an empirical formula of MgO and consists of a lattice of Mg2+ ions and O2− ions held together by ionic bonding. Magnesium hydroxide forms in the presence of water (MgO + H2O → Mg(OH)2), but it can be reversed by heating it to remove moisture.
Magnesium oxide was historically known as magnesia alba (literally, the white mineral from Magnesia), to differentiate it from magnesia nigra, a black mineral containing what is now known as manganese.
While "magnesium oxide" normally refers to MgO, the compound magnesium peroxide MgO2 is also known. According to evolutionary crystal structure prediction, [11] MgO2 is thermodynamically stable at pressures above 116 GPa (gigapascals), and a semiconducting suboxide Mg3O2 is thermodynamically stable above 500 GPa. Because of its stability, MgO is used as a model system for investigating vibrational properties of crystals. [12]
Pure MgO is not conductive and has a high resistance to electric current at room temperature. The pure powder of MgO has a relative permittivity inbetween 3.2 to 9.9 with an approximate dielectric loss of tan(δ) > 2.16x103 at 1kHz. [5] [6] [7]
Magnesium oxide is produced by the
calcination of
magnesium carbonate or
magnesium hydroxide. The latter is obtained by the treatment of
magnesium chloride MgCl
2 solutions, typically seawater, with
limewater or milk of lime.
[13]
Calcining at different temperatures produces magnesium oxide of different reactivity. High temperatures 1500 – 2000 °C diminish the available surface area and produces dead-burned (often called dead burnt) magnesia, an unreactive form used as a refractory. Calcining temperatures 1000 – 1500 °C produce hard-burned magnesia, which has limited reactivity and calcining at lower temperature, (700–1000 °C) produces light-burned magnesia, a reactive form, also known as caustic calcined magnesia. Although some decomposition of the carbonate to oxide occurs at temperatures below 700 °C, the resulting materials appear to reabsorb carbon dioxide from the air.[ citation needed]
MgO is prized as a refractory material, i.e. a solid that is physically and chemically stable at high temperatures. It has the useful attributes of high thermal conductivity and low electrical conductivity. According to a 2006 reference book: [14]
By far the largest consumer of magnesia worldwide is the refractory industry, which consumed about 56% of the magnesia in the United States in 2004, the remaining 44% being used in agricultural, chemical, construction, environmental, and other industrial applications.
MgO is used as a refractory material for crucibles. It is also used as an insulator in heat-resistant electrical cable.
It is used extensively as an electrical insulator in tubular construction heating elements as in electric stove and cooktop heating elements. There are several mesh sizes available and most commonly used ones are 40 and 80 mesh per the American Foundry Society. The extensive use is due to its high dielectric strength and average thermal conductivity. MgO is usually crushed and compacted with minimal airgaps or voids.
MgO is one of the components in Portland cement in dry process plants.
Sorel cement uses MgO as the main component in combination with MgCl2 and water.
MgO has an important place as a commercial plant fertilizer [15] and as animal feed. [16]
It is a principal fireproofing ingredient in construction materials. As a construction material, magnesium oxide wallboards have several attractive characteristics: fire resistance, termite resistance, moisture resistance, mold and mildew resistance, and strength, but also a severe downside as it attracts moisture and can cause moisture damage to surrounding materials [17] [14] [1]
Magnesium oxide is used for relief of heartburn and indigestion, as an antacid, magnesium supplement, and as a short-term laxative. It is also used to improve symptoms of indigestion. Side effects of magnesium oxide may include nausea and cramping. [18] In quantities sufficient to obtain a laxative effect, side effects of long-term use may rarely cause enteroliths to form, resulting in bowel obstruction. [19]
Magnesium oxide is used extensively in the soil and groundwater remediation, wastewater treatment, drinking water treatment, air emissions treatment, and waste treatment industries for its acid buffering capacity and related effectiveness in stabilizing dissolved heavy metal species.[ according to whom?]
Many heavy metals species, such as lead and cadmium, are least soluble in water at mildly basic conditions (pH in the range 8–11). Solubility of metals increases their undesired bioavailability and mobility in soil and groundwater. Granular MgO is often blended into metals-contaminating soil or waste material, which is also commonly of a low pH (acidic), in order to drive the pH into the 8–10 range. Metal-hydroxide complexes tend to precipitate out of aqueous solution in the pH range of 8–10.
MgO is packed in bags around
transuranic waste in the disposal cells (panels) at the
Waste Isolation Pilot Plant, as a CO2 getter to minimize the complexation of
uranium and other
actinides by
carbonate ions and so to limit the
solubility of
radionuclides. The use of MgO is preferred over
CaO since the resulting
hydration product (Mg(OH)
2) is less soluble and releases less
hydration heat. Another advantage is to impose a lower
pH value (about 10.5) in case of accidental water ingress into the dry salt layers, in contast to the more soluble Ca(OH)
2 which would create a higher pH of 12.5 (strongly
alkaline conditions). The Mg2+
cation being the second most abundant cation in
seawater and in
rocksalt, the potential release of magnesium ions dissolving in
brines intruding the
deep geological repository is also expected to minimize the
geochemical disruption.
[20]
Inhalation of magnesium oxide fumes can cause metal fume fever. [32]
Names | |
---|---|
IUPAC name
Magnesium oxide
| |
Other names
| |
Identifiers | |
3D model (
JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.013.793 |
EC Number |
|
E number | E530 (acidity regulators, ...) |
KEGG | |
PubChem
CID
|
|
RTECS number |
|
UNII | |
CompTox Dashboard (
EPA)
|
|
| |
| |
Properties | |
MgO | |
Molar mass | 40.304 g/mol [1] |
Appearance | White powder |
Odor | Odorless |
Density | 3.6 g/cm3 [1] |
Melting point | 2,852 °C (5,166 °F; 3,125 K) [1] |
Boiling point | 3,600 °C (6,510 °F; 3,870 K) [1] |
Solubility | Soluble in
acid,
ammonia insoluble in alcohol |
Electrical resistivity | Dielectric [a] |
Band gap | 7.8 eV [2] |
−10.2·10−6 cm3/mol [3] | |
Thermal conductivity | 45–60 W·m−1·K−1 [4] |
Refractive index (nD)
|
1.7355 |
6.2 ± 0.6 D | |
Structure | |
Halite (cubic), cF8 | |
Fm3m, No. 225 | |
a = 4.212Å
| |
Octahedral (Mg2+); octahedral (O2−) | |
Thermochemistry | |
Heat capacity (C)
|
37.2 J/mol K [8] |
Std molar
entropy (S⦵298) |
26.95 ± 0.15 J·mol−1·K−1 [9] |
Std enthalpy of
formation (ΔfH⦵298) |
−601.6 ± 0.3 kJ·mol−1 [9] |
Gibbs free energy (ΔfG⦵)
|
-569.3 kJ/mol [8] |
Pharmacology | |
A02AA02 ( WHO) A06AD02 ( WHO), A12CC10 ( WHO) | |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
Metal fume fever, Irritant |
GHS labelling: | |
Warning | |
H315, H319, H335 | |
P261, P264, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P312, P333+P313, P337+P313, P362, P363, P391, P403+P233, P405 | |
NFPA 704 (fire diamond) | |
Flash point | Non-flammable |
NIOSH (US health exposure limits): | |
PEL (Permissible)
|
TWA 15 mg/m3 (fume) [10] |
REL (Recommended)
|
None designated [10] |
IDLH (Immediate danger)
|
750 mg/m3 (fume) [10] |
Safety data sheet (SDS) | ICSC 0504 |
Related compounds | |
Other
anions
|
Magnesium sulfide |
Other
cations
|
Beryllium oxide Calcium oxide Strontium oxide Barium oxide |
Related compounds
|
Magnesium hydroxide Magnesium nitride |
Except where otherwise noted, data are given for materials in their
standard state (at 25 °C [77 °F], 100 kPa).
|
Magnesium oxide ( Mg O), or magnesia, is a white hygroscopic solid mineral that occurs naturally as periclase and is a source of magnesium (see also oxide). It has an empirical formula of MgO and consists of a lattice of Mg2+ ions and O2− ions held together by ionic bonding. Magnesium hydroxide forms in the presence of water (MgO + H2O → Mg(OH)2), but it can be reversed by heating it to remove moisture.
Magnesium oxide was historically known as magnesia alba (literally, the white mineral from Magnesia), to differentiate it from magnesia nigra, a black mineral containing what is now known as manganese.
While "magnesium oxide" normally refers to MgO, the compound magnesium peroxide MgO2 is also known. According to evolutionary crystal structure prediction, [11] MgO2 is thermodynamically stable at pressures above 116 GPa (gigapascals), and a semiconducting suboxide Mg3O2 is thermodynamically stable above 500 GPa. Because of its stability, MgO is used as a model system for investigating vibrational properties of crystals. [12]
Pure MgO is not conductive and has a high resistance to electric current at room temperature. The pure powder of MgO has a relative permittivity inbetween 3.2 to 9.9 with an approximate dielectric loss of tan(δ) > 2.16x103 at 1kHz. [5] [6] [7]
Magnesium oxide is produced by the
calcination of
magnesium carbonate or
magnesium hydroxide. The latter is obtained by the treatment of
magnesium chloride MgCl
2 solutions, typically seawater, with
limewater or milk of lime.
[13]
Calcining at different temperatures produces magnesium oxide of different reactivity. High temperatures 1500 – 2000 °C diminish the available surface area and produces dead-burned (often called dead burnt) magnesia, an unreactive form used as a refractory. Calcining temperatures 1000 – 1500 °C produce hard-burned magnesia, which has limited reactivity and calcining at lower temperature, (700–1000 °C) produces light-burned magnesia, a reactive form, also known as caustic calcined magnesia. Although some decomposition of the carbonate to oxide occurs at temperatures below 700 °C, the resulting materials appear to reabsorb carbon dioxide from the air.[ citation needed]
MgO is prized as a refractory material, i.e. a solid that is physically and chemically stable at high temperatures. It has the useful attributes of high thermal conductivity and low electrical conductivity. According to a 2006 reference book: [14]
By far the largest consumer of magnesia worldwide is the refractory industry, which consumed about 56% of the magnesia in the United States in 2004, the remaining 44% being used in agricultural, chemical, construction, environmental, and other industrial applications.
MgO is used as a refractory material for crucibles. It is also used as an insulator in heat-resistant electrical cable.
It is used extensively as an electrical insulator in tubular construction heating elements as in electric stove and cooktop heating elements. There are several mesh sizes available and most commonly used ones are 40 and 80 mesh per the American Foundry Society. The extensive use is due to its high dielectric strength and average thermal conductivity. MgO is usually crushed and compacted with minimal airgaps or voids.
MgO is one of the components in Portland cement in dry process plants.
Sorel cement uses MgO as the main component in combination with MgCl2 and water.
MgO has an important place as a commercial plant fertilizer [15] and as animal feed. [16]
It is a principal fireproofing ingredient in construction materials. As a construction material, magnesium oxide wallboards have several attractive characteristics: fire resistance, termite resistance, moisture resistance, mold and mildew resistance, and strength, but also a severe downside as it attracts moisture and can cause moisture damage to surrounding materials [17] [14] [1]
Magnesium oxide is used for relief of heartburn and indigestion, as an antacid, magnesium supplement, and as a short-term laxative. It is also used to improve symptoms of indigestion. Side effects of magnesium oxide may include nausea and cramping. [18] In quantities sufficient to obtain a laxative effect, side effects of long-term use may rarely cause enteroliths to form, resulting in bowel obstruction. [19]
Magnesium oxide is used extensively in the soil and groundwater remediation, wastewater treatment, drinking water treatment, air emissions treatment, and waste treatment industries for its acid buffering capacity and related effectiveness in stabilizing dissolved heavy metal species.[ according to whom?]
Many heavy metals species, such as lead and cadmium, are least soluble in water at mildly basic conditions (pH in the range 8–11). Solubility of metals increases their undesired bioavailability and mobility in soil and groundwater. Granular MgO is often blended into metals-contaminating soil or waste material, which is also commonly of a low pH (acidic), in order to drive the pH into the 8–10 range. Metal-hydroxide complexes tend to precipitate out of aqueous solution in the pH range of 8–10.
MgO is packed in bags around
transuranic waste in the disposal cells (panels) at the
Waste Isolation Pilot Plant, as a CO2 getter to minimize the complexation of
uranium and other
actinides by
carbonate ions and so to limit the
solubility of
radionuclides. The use of MgO is preferred over
CaO since the resulting
hydration product (Mg(OH)
2) is less soluble and releases less
hydration heat. Another advantage is to impose a lower
pH value (about 10.5) in case of accidental water ingress into the dry salt layers, in contast to the more soluble Ca(OH)
2 which would create a higher pH of 12.5 (strongly
alkaline conditions). The Mg2+
cation being the second most abundant cation in
seawater and in
rocksalt, the potential release of magnesium ions dissolving in
brines intruding the
deep geological repository is also expected to minimize the
geochemical disruption.
[20]
Inhalation of magnesium oxide fumes can cause metal fume fever. [32]