Yeast artificial chromosomes (YACs) are genetically engineered chromosomes derived from the DNA of the yeast, Saccharomyces cerevisiae [1], which is then ligated into a bacterial plasmid. By inserting large fragments of DNA, from 100–1000 kb, the inserted sequences can be cloned and physically mapped using a process called chromosome walking. This is the process that was initially used for the Human Genome Project, however due to stability issues, YACs were abandoned for the use of bacterial artificial chromosome [2]
The bakers' yeast S. cerevisiae is one of the most important experimental organisms for studying eukaryotic molecular genetics. [1]
Beginning with the initial research of the Rankin et al., Strul et al., and Hsaio et al., the inherently fragile chromosome was stabilized by discovering the necessary autonomously replicating sequence (ARS); [2] a refined YAC utilizing this data was described in 1983 by Murray et al. [3]
The primary components of a YAC are the ARS, centromere [3], and telomeres [4] from S. cerevisiae. Additionally, selectable marker genes, such as antibiotic resistance and a visible marker, are utilized to select transformed yeast cells. Without these sequences, the chromosome will not be stable during extracellular replication, and would not be distinguishable from colonies without the vector. [4]
A YAC is built using an initial circular DNA plasmid, which is typically cut into a linear DNA molecule using restriction enzymes; DNA ligase is then used to ligate a DNA sequence or gene of interest into the linearized DNA, forming a single large, circular piece of DNA. [3] [5] The basic generation of linear yeast artificial chromosomes can be broken down into 6 main steps:
Chromosome III is the third smallest chromosome in S. cerevisiae; its size was estimated from pulsed-field gel electro- phoresis studies to be 300–360 kb [10]
This chromosome has been the subject of intensive study, not least because it contains the three genetic loci involved in mating-type control: MAT, HML and HMR. [11] In March 2014, Jef Boeke of the Langone Medical Centre at New York University, published that his team has synthesized one of the S. cerevisiae 16 yeast chromosomes, the chromosome III, that he named synIII. [12] [13] The procedure involved replacing the genes in the original chromosome with synthetic versions and the finished synthesized chromosome was then integrated into a yeast cell. It required designing and creating 273,871 base pairs of DNA - fewer than the 316,667 pairs in the original chromosome.
Yeast expression vectors, such as YACs, YIps (yeast integrating plasmids), and YEps (yeast episomal plasmids), have an advantage over bacterial artificial chromosomes (BACs) in that they can be used to express eukaryotic proteins that require posttranslational modification. By being able to insert large fragments of DNA, YACs can be utilized to clone and assemble the entire genomes of an organism. [14] With the insertion of a YAC into yeast cells, they can be propagated as linear artificial chromosomes, cloning the inserted regions of DNA in the process. With this completed, two processes can be used to obtain a sequenced genome, or region of interest:
This is significant in that it allows for the detailed mapping of specific regions of the genome. Whole human chromosomes have been examined, such as the X chromosome, [16] generating the location of genetic markers for numerous genetic disorders and traits. [17]
In the United States, the Human Genome Project first took clear form in February of 1988, with the release of the National Research Council (NRC) report Mapping and Sequencing the Human Genome. [18] YACs are significantly less stable than BACs, producing "chimeric effects" : artifacts where the sequence of the cloned DNA actually corresponds not to a single genomic region but to multiple regions. Chimerism may be due to either co-ligation of multiple genomic segments into a single YAC, or recombination of two or more YACs transformed in the same host Yeast cell. [19] The incidence of chimerism may be as high as 50%. [20] Other artifacts are deletion of segments from a cloned region, and rearrangement of genomic segments (such as inversion). In all these cases, the sequence as determined from the YAC clone is different from the original, natural sequence, leading to inconsistent results and errors in interpretation if the clone's information is relied upon. Due to these issues, the Human Genome Project ultimately abandoned the use of YACs and switched to bacterial artificial chromosomes, where the incidence of these artifacts is very low. In addition to stability issues, specifically the relatively frequent occurrence of chimeric events, YACs proved to be inefficient when generating the minimum tiling path covering the entire human genome. Generating the clone libraries is time consuming. Also, due to the nature of the reliance on sequence tagged sites (STS) as a reference point when selecting appropriate clones, there are large gaps that need further generation of libraries to span. It is this additional hindrance that drove the project to utilize BACs instead. [21] This is due to two factors: [22]
However, it is possible to utilize both approaches, as was demonstrated when the genome of the nematode, C. elegans. There majority of the genome was tiled with BACs, and the gaps filled in with YACs. [21]
{{
cite journal}}
: CS1 maint: multiple names: authors list (
link)
Yeast artificial chromosomes (YACs) are genetically engineered chromosomes derived from the DNA of the yeast, Saccharomyces cerevisiae [1], which is then ligated into a bacterial plasmid. By inserting large fragments of DNA, from 100–1000 kb, the inserted sequences can be cloned and physically mapped using a process called chromosome walking. This is the process that was initially used for the Human Genome Project, however due to stability issues, YACs were abandoned for the use of bacterial artificial chromosome [2]
The bakers' yeast S. cerevisiae is one of the most important experimental organisms for studying eukaryotic molecular genetics. [1]
Beginning with the initial research of the Rankin et al., Strul et al., and Hsaio et al., the inherently fragile chromosome was stabilized by discovering the necessary autonomously replicating sequence (ARS); [2] a refined YAC utilizing this data was described in 1983 by Murray et al. [3]
The primary components of a YAC are the ARS, centromere [3], and telomeres [4] from S. cerevisiae. Additionally, selectable marker genes, such as antibiotic resistance and a visible marker, are utilized to select transformed yeast cells. Without these sequences, the chromosome will not be stable during extracellular replication, and would not be distinguishable from colonies without the vector. [4]
A YAC is built using an initial circular DNA plasmid, which is typically cut into a linear DNA molecule using restriction enzymes; DNA ligase is then used to ligate a DNA sequence or gene of interest into the linearized DNA, forming a single large, circular piece of DNA. [3] [5] The basic generation of linear yeast artificial chromosomes can be broken down into 6 main steps:
Chromosome III is the third smallest chromosome in S. cerevisiae; its size was estimated from pulsed-field gel electro- phoresis studies to be 300–360 kb [10]
This chromosome has been the subject of intensive study, not least because it contains the three genetic loci involved in mating-type control: MAT, HML and HMR. [11] In March 2014, Jef Boeke of the Langone Medical Centre at New York University, published that his team has synthesized one of the S. cerevisiae 16 yeast chromosomes, the chromosome III, that he named synIII. [12] [13] The procedure involved replacing the genes in the original chromosome with synthetic versions and the finished synthesized chromosome was then integrated into a yeast cell. It required designing and creating 273,871 base pairs of DNA - fewer than the 316,667 pairs in the original chromosome.
Yeast expression vectors, such as YACs, YIps (yeast integrating plasmids), and YEps (yeast episomal plasmids), have an advantage over bacterial artificial chromosomes (BACs) in that they can be used to express eukaryotic proteins that require posttranslational modification. By being able to insert large fragments of DNA, YACs can be utilized to clone and assemble the entire genomes of an organism. [14] With the insertion of a YAC into yeast cells, they can be propagated as linear artificial chromosomes, cloning the inserted regions of DNA in the process. With this completed, two processes can be used to obtain a sequenced genome, or region of interest:
This is significant in that it allows for the detailed mapping of specific regions of the genome. Whole human chromosomes have been examined, such as the X chromosome, [16] generating the location of genetic markers for numerous genetic disorders and traits. [17]
In the United States, the Human Genome Project first took clear form in February of 1988, with the release of the National Research Council (NRC) report Mapping and Sequencing the Human Genome. [18] YACs are significantly less stable than BACs, producing "chimeric effects" : artifacts where the sequence of the cloned DNA actually corresponds not to a single genomic region but to multiple regions. Chimerism may be due to either co-ligation of multiple genomic segments into a single YAC, or recombination of two or more YACs transformed in the same host Yeast cell. [19] The incidence of chimerism may be as high as 50%. [20] Other artifacts are deletion of segments from a cloned region, and rearrangement of genomic segments (such as inversion). In all these cases, the sequence as determined from the YAC clone is different from the original, natural sequence, leading to inconsistent results and errors in interpretation if the clone's information is relied upon. Due to these issues, the Human Genome Project ultimately abandoned the use of YACs and switched to bacterial artificial chromosomes, where the incidence of these artifacts is very low. In addition to stability issues, specifically the relatively frequent occurrence of chimeric events, YACs proved to be inefficient when generating the minimum tiling path covering the entire human genome. Generating the clone libraries is time consuming. Also, due to the nature of the reliance on sequence tagged sites (STS) as a reference point when selecting appropriate clones, there are large gaps that need further generation of libraries to span. It is this additional hindrance that drove the project to utilize BACs instead. [21] This is due to two factors: [22]
However, it is possible to utilize both approaches, as was demonstrated when the genome of the nematode, C. elegans. There majority of the genome was tiled with BACs, and the gaps filled in with YACs. [21]
{{
cite journal}}
: CS1 maint: multiple names: authors list (
link)