High Jimp - I noticed you made some edits to some paper related articles, so I was wondering if you had any ideas for an issue we have on at business card. We have lots of people adding in metrics for business cars for different countries, but no good sources from publications that could be considered neutral an reliable. In particular this has come up over the card stock used as individual retailers are (rightly) more geared up to market what they sell, rather than survey the industry and report averages. If you've come across good sources (especially international ones) it would be great if you could share them. Thanks. -- Siobhan Hansa 23:56, 2 May 2007 (UTC)
Hello, Jimp. An automated process has found and removed an image or media file tagged as nonfree media, and thus is being used under fair use that was in your userspace. The image ( Image:Aunty-jack-c.jpg) was found at the following location: User:Jimp. This image or media was attempted to be removed per criterion number 9 of our non-free content policy. The image or media was replaced with Image:NonFreeImageRemoved.svg , so your formatting of your userpage should be fine. Please find a free image or media to replace it with, and or remove the image from your userspace. User:Gnome (Bot) -talk 04:53, 15 May 2007 (UTC)
Hello, Jimp. An automated process has found and removed an image or media file tagged as nonfree media, and thus is being used under fair use that was in your userspace. The image ( Image:Dr-Smith-oxygen-mask-1966.JPG) was found at the following location: User:Jimp. This image or media was attempted to be removed per criterion number 9 of our non-free content policy. The image or media was replaced with Image:NonFreeImageRemoved.svg , so your formatting of your userpage should be fine. Please find a free image or media to replace it with, and or remove the image from your userspace. User:Gnome (Bot) -talk 01:26, 16 May 2007 (UTC)
Sorry about that. Of course I don't mind at all. I'm just so used to using that + button. Bladestorm 00:33, 30 May 2007 (UTC)
I guess you're right, it doesn't matter whether your teacher is carring/looking... but it's sooooooo fun to try to be sneaky sneaky. -- 71.60.175.60 07:38, 31 May 2007 (UTC) Aka Da Jew
*{{User talk:Jimp/Measurement|10|m|ft}} *{{User talk:Jimp/Measurement|10|ft|mm}} *{{User talk:Jimp/Measurement|10|sqin|sqmm|sp=us}} *{{User talk:Jimp/Measurement|1000|ft|km|sp=us}} *{{User talk:Jimp/Measurement|1000|acre|sq nmi}} *{{User talk:Jimp/Measurement|100|°C|°F}} *{{User talk:Jimp/Measurement|0|°C|K}} *{{User talk:Jimp/Measurement|-40|°F|°C}} *{{User talk:Jimp/Measurement|900|°R|K}}
Hi, would love your input on User:Tony1/Hyphens_and_dashes, which is approaching the point of implementation. See also Wikipedia_talk:Manual_of_Style#Hyphens_and_dashes_in_the_MoS. Tony 01:02, 9 June 2007 (UTC)
Jimp, thanks so much for your points, most of which have merit, at a glance. I'll sort them out tomorrow (hoping to implement late tomorrow or Thursday).
But at this stage, I have to say that I don't understand the opening sentence of your Point 8. And then, what is "the software"? Are you saying that en dashes don't show on WP? Or just on your computer? And minus signs? People seem to have no trouble displaying them.
8) Since we have a minus sign, why use the endash in its place? However, the software doesn't recognise the minus sign as a minus sign. The endash does no better. It seems only to recognise the hyphen.
{{#expr:5-2}}
gives 3{{#expr:5–2}}
gives Expression error: Unrecognized punctuation character "–".{{#expr:5—2}}
gives Expression error: Unrecognized punctuation character "—".{{#expr:5−2}}
gives 3Tony 12:31, 12 June 2007 (UTC)
Oh, I see, you're saying that since we have a minus sign, why not insist on its use for minus signs and operators. Well, it's a rather subtle difference visually, and that would be more proscription. Most people use en dashes for minus. But I still don't get the rest of your point. Tony 12:33, 12 June 2007 (UTC)
Ah, what a classy way to stick it up my ass :) Point taken. I must admit that I used {{ space}} without even looking at its code (assuming it produces regular spaces), and that the only reason why I even considered {{ space}} was because I was too lazy to look up the HTML code for the regular space (which, as you correctly indicated, is  ) in the first place. Thanks for taking care of that.— Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • ( yo?); 12:21, 26 June 2007 (UTC)
The wording's awkward. but actually the U.S. has officially adopted the metric system. All the customary U.S. units have been defined since 1893 in terms of metric units. Caerwine Caer’s whines 04:04, 5 July 2007 (UTC)
Might it not be better then to use American spelling throughout that article? The article is primarily based around a U.S. viewpoint, which is understandable since the U.S. is the primary country that does not use the metric system as their primary set of ordinary units of measure. Caerwine Caer’s whines 06:56, 20 September 2007 (UTC)
Thnaks, Jimp! I have tried and tried to find english versions of the maps, but haven't managed to find them... But regarding the map displaying the Pre-roman peoples of Iberia, I've had and interesting talk with user EspañaViva, maybe you would like to help? Thanks again! The Ogre 12:26, 17 July 2007 (UTC)
Hi Jimp, and sorry, I first ended up at your external page, so ignore this same message there, please, the location of which seems to have caused the very problems I was talking about there.
Given that we both know that thin spaces are optimal for all of the "spaced" items specified in the MOS, we need to deal with the non-break space issue too. I don't see how you can insert both html codes at once. That will give a normal and a thin space together, as you'll see below: the first is thin space, the second is (normal-space) non-breaking, and the third contains both (larger still). Hmmm.
You're no doubt familiar with the "no wrap" template, which is supposed to perform the same function as the non-breaking space html code. I pasted in an example from Template:Nowrap, and then inserted the thin-space html code: it looks right; is this solution worth promoting as the way to go? That is, as an alternative to normal spaces, use the nowrap template with thin space html code?
Any suggestions? Tony 10:52, 18 July 2007 (UTC)
PS Yep, pasted it into the middle of a line of text, and it appears to work. Tony 10:56, 18 July 2007 (UTC)
Jimp, I'm unsure whether your note on my page was in response to this or to
my latest suggestion at MOSNUM talk. I hope it's the former, since I thought I'd solved the problem with nowrap. It works just fine on my puter. By "my machine", I wonder what you mean ...
Tony
11:48, 19 July 2007 (UTC)
whats with that picture of dead animals on a platter ? on yr user page ? 68.43.91.73
Ta for your edit: could we avoid "US, US" by changing the second to "imperial", or using the same word order as for the subsequent point? Tony 00:59, 5 August 2007 (UTC)
Sorry I had to revert your edits on the template Counties of Iceland but they seem to cause all other templates within a template group to disappear as it did on the Iceland article. Maybe you can fix your edits so they don't cause this problem. -- ErickAgain 22:38, 28 August 2007 (UTC)
Template:Economy of Denmark table has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for Deletion page. Thank you. — Lilac Soul ( talk • contribs • count) 09:37, 30 August 2007 (UTC)
Hi,
There was a recent discussion on wp:mosnum about the merits of templates versus manual conversions. My monobook metrication code searches articles for any digits followed by unitnames and replaces them with the convert template. I would like to do arithmetic in the monobook code itself and drop the manual conversion into the article. I do not understand all the 'if#' stuff.e Can you help me with some hints please? Regards Lightmouse 12:01, 5 September 2007 (UTC)
Hi, Jimp! Thanks for tweaking this template to include feet conversion. I just wanted to point out that instead of modifying this template it would be more logical to create a new one, {{ cm to ft in}} (which would help to get rid of the extra ft parameter). This way, we'll eventually have a set of templates including {{ ft to m}}, {{ ft in to m}}, {{ ft to cm}}, {{ ft in to cm}}, {{ m to ft}}, {{ m to ft in}}, {{ cm to ft}} (with decimal feet), and {{ cm to ft in}}. Since all of the "x to y" templates in the Category:Conversion templates are single-purpose, this scheme will help keep it clean and consistent. Thanks!— Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • ( yo?); 17:33, 11 September 2007 (UTC)
Hello, Jimp! I realize we've never met, but I do tend to read talk pages, and I've long considered you to be one of the "template" gurus, and I was wondering if perhaps you have time to take a look at a project that my friend Mike is doing, a cubic foot to cubic meters template. He's got it in his userspace right now, and while he's an advanced programmer in "RL", some of the various Wiki-script/syntax issues are not familiar to him, as I'm sure you can understand. His starting template is located here, and I believe probably based off of the {{ ft to m}} template. If you do not have the time to assist, that's fine, and if you could point to someone who perhaps would be able to help, that would be very helpful, as well! Thank you, Ariel ♥ Gold 21:32, 25 September 2007 (UTC)
Per Template talk:M3 to ft3, are you aware of some kind of "startsWith" function? It would take input of, say, "american", and return true for "am", "amer", "america", etc... Thanks! -- Mike Vitale 15:33, 28 September 2007 (UTC)
Much apologies. I did not read the latter part of that part of the MOS. I simply assumed that all headings should be bolded, regardless of whether they were descriptive. We are on the same page now. However - are you sure this could be considered "descriptive"? where is the description? It is very clearly the "trade and use" - that is actually something. Perhaps this constitutes a loophole? -- Anonymous Dissident Talk 00:10, 1 October 2007 (UTC)
I like way this works now - it is great. One question I would like it to match the precision of the inputed value but never go to a decimal. I tried to do this by indicating a precision of 0, but of course that makes 115,000 convert to 10,684 instead of 10,700.
In an ideal world I would like it to give at least 2 significant digits (So 100,000 would be 9,300), match the significant digits on the input, but never go to a decimal. So a 11,348 ft2 would be 1,054 not 1054.3.
Any help you could give me on getting it to do this would be appreciated.
Thx - Jim -- Trödel 16:03, 1 October 2007 (UTC)
We have all the following templates being used - each more than 60 times on the same page.
Perhaps this could create the problem. I'm just guessing here - please help me !!! Thx -- Trödel 19:33, 1 October 2007 (UTC)
Hi - You may want to look at the documentation for the use of the temple data here: Wikipedia:WikiProject Latter Day Saint movement/Temples - let me know if I can help -- Trödel 22:55, 2 October 2007 (UTC)
Thx for making the changes - I have deleted the two templates do you know of generic templates to convert ft to m and acres to hectares? -- Trödel 19:11, 5 October 2007 (UTC)
Thx for the links - I had been looking at ft to m a little and playing with it - but then didn't have time this weekend to do anything. I've added it to my mental to do list -- Trödel 19:55, 8 October 2007 (UTC)
Everything is working great. But I haven't figured out how all the sub-templates work - I see you are making the length shorter by using -site-floor, etc. but don't have time to go through it all right now. If you could give me a brief explanation of what you did - then I'll do some detailed document it on the talk page for future generations :) Thx -- Trödel 00:09, 12 October 2007 (UTC)
Wow - thanks for the detailed explanation. I'll included it here: Wikipedia:WikiProject Latter Day Saint movement/Temples. -- Trödel 15:46, 15 October 2007 (UTC)
D'you know what a mad lib is? It's a phrase in which you switch certain words with another word of the same part of speech, so the end result is ridiculous, and funny. Here, I decided to share this with someone to humor you (and myself), as I have nothing else to do and I am tired. Kaktibhar 08:42, 15 October 2007 (UTC)
A Rough Day
"It all started when I awoke with a black pain in my eyebrows. Then, my octometrist was late. We got plucked in traffic for One thousand, two hundred thirty-four years, which made me stinky for my meeting with Sean Connery. I apologized filthily to him, which seemed to make things eccentric again. But then the meeting turned into tubas, with him flying and suffering. I bled when he spilled off. On the way home we passed a hint on a pond. Suddenly the hint sliced in the road and my octometrist had to push to avoid it. In the process, I was slaughtered from the gate, landing on my eyelid. I was covered in sulfuric acid from elbow to fingernail. Could this day get any more disgraceful? My octometrist grated me back into the gate and we made our way back to the luck. I went straight to The Black Market. I was lengthy!"
Hi Jimp,
Can you make a subtemplate for dunam to square kilometers and square miles in the future? It would look like this: 4,000 dunams (4.0 km²/1.54 sq mi). It is a unit of measurement currently used in the middle east and I keep coming across it. Regards, — MJCdetroit 19:35, 20 October 2007 (UTC)
Thank you for your contributions to Wikipedia. You may make test edits in the sandbox, but for the convenience of others, please leave the sandbox heading alone. P51Mustang 22:05, 20 October 2007 (UTC)
A tag has been placed on Convert/W, requesting that it be speedily deleted from Wikipedia. This has been done because the page appears to have no meaningful content or history, and the text is unsalvageably incoherent.
If you think that this notice was placed here in error, you may contest the deletion. To do this, add {{
hangon}}
on the top of the page (just below the existing speedy deletion or "db" tag) and leave a note on the page's talk page explaining your position. Please do not remove the speedy deletion tag yourself.
If the page you created was a test, please use the sandbox for any other experiments you would like to do. Feel free to leave a message on my talk page if you have any questions about this. VivioFa teFan ( Talk, Sandbox) 07:03, 6 November 2007 (UTC)
Hi Jimp,
I had a bot go through and place of all of your subtemplates in the Category:Subtemplates of Template Convert
Please use the text:
<noinclude> [[Category:Subtemplates of Template Convert]] </noinclude>
when creating new subtemplates. Now we'll just have to get a bot to protect everything in that category. — MJCdetroit 15:20, 9 November 2007 (UTC)
<noinclude> {{Uncategorized template}} </noinclude>
to these subtemplates. I got me thinking—some kind of categorisation of these might be useful. Of course, a catgeory such as Subtemplates of Template Convert would be the over-all category but this would be subdivided according to the function of the subtemplate and some of those subcategories would be further subdivided (e.g. unit subtemplates sorted according to what they measure). Everything would be nicely listed ... alphabetically, which isn't terribly useful (as opposed to something like
this) ... though these category pages would be the obvious place to put more useful listings. However, I then got to wondering what the cost would be in terms of pre-expand size. To my dismay whilst playing around with this in the sandbox (the main one) I found that these categories do seem to count to pre-expand size. I abandoned the idea. Now here's another use for categorisation: to guide a protection bot.<noinclude>
[[Category:Subtemplates of Template Convert]]
</noinclude>
, that's seventy bytes per subtemplate. Any one transclusion of the new Convert relies on at least five subtemplates (mulitple conversions can more than double this). A rough guestimation puts the cost of this categorisation at something like a ten to twenty percent increase in pre-expand size. Would Category:Subtemplates of Template Convert have any further use after the protection bot had been through?Hi Jimp,
After I switch template convert back to the new version, would you mind if I temporarily downgraded the protection so that all users can edit (in this case revert) it if necessary? —
MJCdetroit
00:04, 13 November 2007 (UTC)
You'll need to expand that explanation table at {{ convert/doc}}. I would suggest stealing a much as you can from {{ ConvertW}} and {{ ConvertV}}. — MJCdetroit 03:39, 13 November 2007 (UTC)
Apparently, you changed conversion templates at Greg Skrepenak and Canon PowerShot TX1 incorrectly. I am not sure what you were trying to do.-- TonyTheTiger ( t/ c/ bio/ WP:LOTD) 00:04, 13 November 2007 (UTC)
Hi Jimp, I saw you were trying to figure out something in Category:Unit display/doc. I created that file. If you have any questions about it just ask. P.S. I wanted to help with your work on {{ Convert}} but got busy outside Wikipedia. -- PatLeahy ( talk) 03:06, 13 November 2007 (UTC)
I've used {{ L to gal}} for quite a few motorcycle infoboxes (e.g. Honda Ruckus) and found it very useful. However, it displayed an error for US gallons if the second parameter was not defined. I fixed up {{ L to gal/1}} and it seems to work now. This might be moot if {{ Convert}} is taking over but I thought I'd let you know in case you want to check my work. Brianhe ( talk) 17:17, 22 November 2007 (UTC)
Hi Jimp,
When you get a chance can you create a subtemplate for {{
convert}} of sqmi ha? Also, could you explain how the subtemplate codes work? For example, what does each of the letters (u, n, j, b, h, o, etc) mean? Yea, some are self explanatory and some I can venture to guess, but it would be helpful to have them documented somewhere so that others (like me) could more easily produce some more subtemplates as needed. —
MJCdetroit
15:40, 4 December 2007 (UTC)
sqmi ha
is done. --
J
ɪ
m
p
18:08, 4 December 2007 (UTC)
Jimp: Regarding the SI multiples template and this edit you made your stated purpose was to “allow μ= option”. I guess I don’t understand how to use the template because no matter what I type into the template fields in the Kilogram article, (µ µ µ mc), I can’t get the “µg” to display. Would you please change the entry in the Kilogram article so the “µg” uses the µ symbol? I much prefer the micro symbol (µ) over the Greek mu (μ). I come from a computer and typography background and understand the reason for the creation of the Unicode µ symbol in the first place. It should be the default option in the template IMO. Greg L ( my talk) 03:48, 11 December 2007 (UTC)
Again, thanks for your efforts on {{ SI multiples}} and {{ Convert/µW·h}}. I couldn’t imagine being able to easily parse and figure out how to make templates like that and really admire and appreciate those of we volunteers who are willing to quietly go about and help others by working on these templates. Greg L ( my talk) 16:47, 11 December 2007 (UTC)
I noticed that you've done several updates today to Template:Infobox Ship. But from what I understand from WP:SHIPS, that template is being deprecated and replaced with the template shown at Template:Infobox Ship Example.
From talk at WP:SHIPS, it appears that no one expects Infobox Ship to go away anytime soon because of how widespread it is used; but the long term goal is to migrate all articles using it to the newer one.
Disclaimer: I'm new to WP:SHIPS, and not a member of the project as yet. I just saw your updates and thought I would point this out in case you weren't aware as yet. --- Barek ( talk • contribs) - 16:57, 11 December 2007 (UTC)
Jimp: What does the “tl” in {{tl|SI multiples}} stand for and is there an equivalent syntax to do the same thing with links to images? Greg L ( my talk) 20:53, 13 December 2007 (UTC)
I hope I have a solution to formatting numbers you approve of. Please see this update, as well as the post immediately preceding that one. Greg L ( my talk) 01:01, 20 December 2007 (UTC)
Jimp, check out this part of Font size. As far as I can see, this article has been using decimal-delimited formatting since this 1 April 2006 version. As you can see however, the article has been using simple spaces (not even the non-breaking type). I submit that Wikipedia could really benefit from an easy-to-use template. I took a peak at perl, it appears to be totally beyond my expertise. Would making one take a crap-pile of time? Greg L ( my talk) 03:30, 24 December 2007 (UTC)
* '''0.376 065 mm''' (0.0249% larger than Didot's point) — the traditional value in European printers' offices
* '''0.376 000 mm''' (0.0076% larger) — used by [[:de:H. Berthold AG|Hermann Berthold]] (1831–1904) and many others
* '''0.375 940 mm''' (0.0084% smaller) — [[Jan Tschichold]] (1902–1974), who used 266 points in 100 mm
* '''0.375 000 mm''' (0.2584% smaller) — proposed in 1975, but never adopted
It’s clear that the simple use of full-width spaces isn’t an uncommon technique whatsoever on Wikipedia. Even though the regular-size spaces are large and make numeric strings appear like separate values, it seems readers readily understand and adapt. This common-sense observation flies in the face of SMcCandlish and his reasoning for opposing a template. He wrote “It [delimited decimal strings] is not understood by most readers”. Hogwash. Many Wikipedia articles have displayed numeric strings for years that have had full-width spaces in them. So it’s obvious on the face of it that using em-based span control to delimit would make it even easier for readers to recognize and understand what they’re looking at.
I think Font size is a textbook example of how Wikipedia could benefit from a template for delimiting numeric values with proper-size, em-based pair kerning (span control). It would make editing much easier, harmonize numeric strings across articles, make numeric strings much easier to understand, make numeric strings look more professional, and make numeric strings true, Excel-pasteable numeric values. Greg L ( my talk) 09:15, 25 December 2007 (UTC)
I found a book in the bookstore called Not Just Cartoons: Nicktoons! by Jerry Beck. I'm not going to buy it and join the project, but I will ask the other members to get the book so that they can add real world information about various fictional characters.
This makes the creation of separate articles for *many* fictional characters feasible. Having information about the development of the character will make the articles satisfy Wikipedia:Notability (fiction)
In this case, the source has a lot of information about Ren and Stimpy and one could possibly write separate articles for each character. WhisperToMe ( talk) 06:39, 25 December 2007 (UTC)
Merry Christmas and happy New Year Jimp,
Can the default be switched on this 'st lb' subtemplate so that it reads X st X lb (X kg/X lb)? I am not asking that it be done (yet), just if it is easily possible? I think that someone may have been hinting that the lb (X lb/... confuses them.
{{convert|13|st|7|lb|0|abbr=on|lk=on}} to produce 13 st 7 lb (86 kg; 189 lb)
Regards, —
MJCdetroit (
talk)
14:25, 27 December 2007 (UTC)
{{
convert/and/lb}}
not {{
convert/st lb}}
, the latter gives you conversions to both stones and pounds, e.g. {{convert|100|kg|st lb}} gives 100 kilograms (16 st; 220 lb).
J
ɪ
m
p
19:18, 27 December 2007 (UTC)Jimp, nice to hear from you. My response to your post is here. Greg L ( my talk) 20:46, 27 December 2007 (UTC)
The da Vinci Barnstar | ||
I thought I knew how to code complex templates... then I saw {{ convert}}. This is for not going insane. — Random832 16:47, 11 January 2008 (UTC) |
The Template Barnstar is bestowed upon you | ||
For the HUGH overhaul of {{ convert}}. Wikipedia is better off for having you— the 800 lb (363 kg; 57 st 2 lb) gorilla of template construction— around. — MJCdetroit (yak) 00:34, 13 January 2008 (UTC) |
Jimp,
Could you please verify my copy, paste, and tweek technique of {{
Convert/ha sqmi}}? That will also need the category added to it.
Also, could you create an explanation page of what all the sub template parameter letters mean? Some are ease to figure out, b= is base in an SI unit, where area is in sq meters, but others are not so easy. Like what is j=? In any case, an explanation page is very much needed. Thanks — MJCdetroit (yak) 18:03, 14 January 2008 (UTC)
Hi again Jimp,
I've created a series of sub-templates based on population density. They are some what subdivided into a "/unit" and a "PD/unit". The "PD/unit" will added the words "inhabitants per unit X. Think that everything is correct but a second set of eyes (yours) can't hurt. However, I am getting one weird error/oddity with the /acre and PD/acre templates. They don't abbreviate like they should, i.e /acre and not per acre, etc—see below. Can you please proofread the following subtemplates? P.S. I haven't created any multiple sub templates yet, so no converting per acre into per sq km and per sq mile.
{{convert|100|/sqkm}} -> 100 per square kilometre (260/sq mi)
{{convert|100|PD/sqkm}} -> 100 inhabitants per square kilometre (260/sq mi)
{{convert|100|/ha}} -> 100 per hectare (40/acre)
{{convert|100|PD/ha}} -> 100 inhabitants per hectare (40/acre)
{{convert|100|/acre}} -> 100 per acre (250/ha)
{{convert|100|PD/acre}} -> 100 inhabitants per acre (250/ha)
{{convert|100|/sqmi}} -> 100 per square mile (39/km2)
{{convert|100|PD/sqmi}} -> 100 inhabitants per square mile (39/km2)
{{convert|100|/sqmi|/acre}} -> 100 per square mile (0.16/acre)
{{convert|100|PD/sqmi|PD/acre}} -> 100 inhabitants per square mile (0.16/acre)
{{convert|100|/acre|/sqmi}} -> 100 per acre (64,000/sq mi)
{{convert|100|PD/acre|PD/sqmi}} -> 100 inhabitants per acre (64,000/sq mi)
{{convert|100|/ha|/sqkm}} -> 100 per hectare (10,000/km2)
{{convert|100|PD/ha|PD/sqkm}} -> 100 inhabitants per hectare (10,000/km2)
— MJCdetroit (yak) 16:43, 21 January 2008 (UTC)
h
(this is for adjectives) and exact figures (i.e. fractions) for b
(do you calculations with excat figures and round at the end).10000⁄9144×10000⁄9144×1⁄22×1⁄220 m−2 | = 1250⁄1143×1250⁄1143×1⁄22×1⁄220 m−2 |
= 1250⁄1143×125⁄1143×1⁄22×1⁄22 m−2 | |
= 625⁄1143×125⁄1143×1⁄11×1⁄22 m−2 | |
= 625×125⁄1143×1143×11×22 m−2 | |
= 78125⁄316160658 m−2 |
Thanks for the heads-up. 4u1e ( talk) 10:09, 15 January 2008 (UTC)
See a full draft of the proposal |
---|
|
Progress, yes? Hope to see you there, Jimp.
– Noetica♬♩ Talk 07:18, 16 January 2008 (UTC)
Template:Aust Beer Glass has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for Deletion page. Thank you. -- Mark Chovain 08:18, 17 January 2008 (UTC)
Thanks for your note. Can you tell me why it's been removed though? Thanks AreJay ( talk) 12:36, 17 January 2008 (UTC)
High Jimp - I noticed you made some edits to some paper related articles, so I was wondering if you had any ideas for an issue we have on at business card. We have lots of people adding in metrics for business cars for different countries, but no good sources from publications that could be considered neutral an reliable. In particular this has come up over the card stock used as individual retailers are (rightly) more geared up to market what they sell, rather than survey the industry and report averages. If you've come across good sources (especially international ones) it would be great if you could share them. Thanks. -- Siobhan Hansa 23:56, 2 May 2007 (UTC)
Hello, Jimp. An automated process has found and removed an image or media file tagged as nonfree media, and thus is being used under fair use that was in your userspace. The image ( Image:Aunty-jack-c.jpg) was found at the following location: User:Jimp. This image or media was attempted to be removed per criterion number 9 of our non-free content policy. The image or media was replaced with Image:NonFreeImageRemoved.svg , so your formatting of your userpage should be fine. Please find a free image or media to replace it with, and or remove the image from your userspace. User:Gnome (Bot) -talk 04:53, 15 May 2007 (UTC)
Hello, Jimp. An automated process has found and removed an image or media file tagged as nonfree media, and thus is being used under fair use that was in your userspace. The image ( Image:Dr-Smith-oxygen-mask-1966.JPG) was found at the following location: User:Jimp. This image or media was attempted to be removed per criterion number 9 of our non-free content policy. The image or media was replaced with Image:NonFreeImageRemoved.svg , so your formatting of your userpage should be fine. Please find a free image or media to replace it with, and or remove the image from your userspace. User:Gnome (Bot) -talk 01:26, 16 May 2007 (UTC)
Sorry about that. Of course I don't mind at all. I'm just so used to using that + button. Bladestorm 00:33, 30 May 2007 (UTC)
I guess you're right, it doesn't matter whether your teacher is carring/looking... but it's sooooooo fun to try to be sneaky sneaky. -- 71.60.175.60 07:38, 31 May 2007 (UTC) Aka Da Jew
*{{User talk:Jimp/Measurement|10|m|ft}} *{{User talk:Jimp/Measurement|10|ft|mm}} *{{User talk:Jimp/Measurement|10|sqin|sqmm|sp=us}} *{{User talk:Jimp/Measurement|1000|ft|km|sp=us}} *{{User talk:Jimp/Measurement|1000|acre|sq nmi}} *{{User talk:Jimp/Measurement|100|°C|°F}} *{{User talk:Jimp/Measurement|0|°C|K}} *{{User talk:Jimp/Measurement|-40|°F|°C}} *{{User talk:Jimp/Measurement|900|°R|K}}
Hi, would love your input on User:Tony1/Hyphens_and_dashes, which is approaching the point of implementation. See also Wikipedia_talk:Manual_of_Style#Hyphens_and_dashes_in_the_MoS. Tony 01:02, 9 June 2007 (UTC)
Jimp, thanks so much for your points, most of which have merit, at a glance. I'll sort them out tomorrow (hoping to implement late tomorrow or Thursday).
But at this stage, I have to say that I don't understand the opening sentence of your Point 8. And then, what is "the software"? Are you saying that en dashes don't show on WP? Or just on your computer? And minus signs? People seem to have no trouble displaying them.
8) Since we have a minus sign, why use the endash in its place? However, the software doesn't recognise the minus sign as a minus sign. The endash does no better. It seems only to recognise the hyphen.
{{#expr:5-2}}
gives 3{{#expr:5–2}}
gives Expression error: Unrecognized punctuation character "–".{{#expr:5—2}}
gives Expression error: Unrecognized punctuation character "—".{{#expr:5−2}}
gives 3Tony 12:31, 12 June 2007 (UTC)
Oh, I see, you're saying that since we have a minus sign, why not insist on its use for minus signs and operators. Well, it's a rather subtle difference visually, and that would be more proscription. Most people use en dashes for minus. But I still don't get the rest of your point. Tony 12:33, 12 June 2007 (UTC)
Ah, what a classy way to stick it up my ass :) Point taken. I must admit that I used {{ space}} without even looking at its code (assuming it produces regular spaces), and that the only reason why I even considered {{ space}} was because I was too lazy to look up the HTML code for the regular space (which, as you correctly indicated, is  ) in the first place. Thanks for taking care of that.— Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • ( yo?); 12:21, 26 June 2007 (UTC)
The wording's awkward. but actually the U.S. has officially adopted the metric system. All the customary U.S. units have been defined since 1893 in terms of metric units. Caerwine Caer’s whines 04:04, 5 July 2007 (UTC)
Might it not be better then to use American spelling throughout that article? The article is primarily based around a U.S. viewpoint, which is understandable since the U.S. is the primary country that does not use the metric system as their primary set of ordinary units of measure. Caerwine Caer’s whines 06:56, 20 September 2007 (UTC)
Thnaks, Jimp! I have tried and tried to find english versions of the maps, but haven't managed to find them... But regarding the map displaying the Pre-roman peoples of Iberia, I've had and interesting talk with user EspañaViva, maybe you would like to help? Thanks again! The Ogre 12:26, 17 July 2007 (UTC)
Hi Jimp, and sorry, I first ended up at your external page, so ignore this same message there, please, the location of which seems to have caused the very problems I was talking about there.
Given that we both know that thin spaces are optimal for all of the "spaced" items specified in the MOS, we need to deal with the non-break space issue too. I don't see how you can insert both html codes at once. That will give a normal and a thin space together, as you'll see below: the first is thin space, the second is (normal-space) non-breaking, and the third contains both (larger still). Hmmm.
You're no doubt familiar with the "no wrap" template, which is supposed to perform the same function as the non-breaking space html code. I pasted in an example from Template:Nowrap, and then inserted the thin-space html code: it looks right; is this solution worth promoting as the way to go? That is, as an alternative to normal spaces, use the nowrap template with thin space html code?
Any suggestions? Tony 10:52, 18 July 2007 (UTC)
PS Yep, pasted it into the middle of a line of text, and it appears to work. Tony 10:56, 18 July 2007 (UTC)
Jimp, I'm unsure whether your note on my page was in response to this or to
my latest suggestion at MOSNUM talk. I hope it's the former, since I thought I'd solved the problem with nowrap. It works just fine on my puter. By "my machine", I wonder what you mean ...
Tony
11:48, 19 July 2007 (UTC)
whats with that picture of dead animals on a platter ? on yr user page ? 68.43.91.73
Ta for your edit: could we avoid "US, US" by changing the second to "imperial", or using the same word order as for the subsequent point? Tony 00:59, 5 August 2007 (UTC)
Sorry I had to revert your edits on the template Counties of Iceland but they seem to cause all other templates within a template group to disappear as it did on the Iceland article. Maybe you can fix your edits so they don't cause this problem. -- ErickAgain 22:38, 28 August 2007 (UTC)
Template:Economy of Denmark table has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for Deletion page. Thank you. — Lilac Soul ( talk • contribs • count) 09:37, 30 August 2007 (UTC)
Hi,
There was a recent discussion on wp:mosnum about the merits of templates versus manual conversions. My monobook metrication code searches articles for any digits followed by unitnames and replaces them with the convert template. I would like to do arithmetic in the monobook code itself and drop the manual conversion into the article. I do not understand all the 'if#' stuff.e Can you help me with some hints please? Regards Lightmouse 12:01, 5 September 2007 (UTC)
Hi, Jimp! Thanks for tweaking this template to include feet conversion. I just wanted to point out that instead of modifying this template it would be more logical to create a new one, {{ cm to ft in}} (which would help to get rid of the extra ft parameter). This way, we'll eventually have a set of templates including {{ ft to m}}, {{ ft in to m}}, {{ ft to cm}}, {{ ft in to cm}}, {{ m to ft}}, {{ m to ft in}}, {{ cm to ft}} (with decimal feet), and {{ cm to ft in}}. Since all of the "x to y" templates in the Category:Conversion templates are single-purpose, this scheme will help keep it clean and consistent. Thanks!— Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • ( yo?); 17:33, 11 September 2007 (UTC)
Hello, Jimp! I realize we've never met, but I do tend to read talk pages, and I've long considered you to be one of the "template" gurus, and I was wondering if perhaps you have time to take a look at a project that my friend Mike is doing, a cubic foot to cubic meters template. He's got it in his userspace right now, and while he's an advanced programmer in "RL", some of the various Wiki-script/syntax issues are not familiar to him, as I'm sure you can understand. His starting template is located here, and I believe probably based off of the {{ ft to m}} template. If you do not have the time to assist, that's fine, and if you could point to someone who perhaps would be able to help, that would be very helpful, as well! Thank you, Ariel ♥ Gold 21:32, 25 September 2007 (UTC)
Per Template talk:M3 to ft3, are you aware of some kind of "startsWith" function? It would take input of, say, "american", and return true for "am", "amer", "america", etc... Thanks! -- Mike Vitale 15:33, 28 September 2007 (UTC)
Much apologies. I did not read the latter part of that part of the MOS. I simply assumed that all headings should be bolded, regardless of whether they were descriptive. We are on the same page now. However - are you sure this could be considered "descriptive"? where is the description? It is very clearly the "trade and use" - that is actually something. Perhaps this constitutes a loophole? -- Anonymous Dissident Talk 00:10, 1 October 2007 (UTC)
I like way this works now - it is great. One question I would like it to match the precision of the inputed value but never go to a decimal. I tried to do this by indicating a precision of 0, but of course that makes 115,000 convert to 10,684 instead of 10,700.
In an ideal world I would like it to give at least 2 significant digits (So 100,000 would be 9,300), match the significant digits on the input, but never go to a decimal. So a 11,348 ft2 would be 1,054 not 1054.3.
Any help you could give me on getting it to do this would be appreciated.
Thx - Jim -- Trödel 16:03, 1 October 2007 (UTC)
We have all the following templates being used - each more than 60 times on the same page.
Perhaps this could create the problem. I'm just guessing here - please help me !!! Thx -- Trödel 19:33, 1 October 2007 (UTC)
Hi - You may want to look at the documentation for the use of the temple data here: Wikipedia:WikiProject Latter Day Saint movement/Temples - let me know if I can help -- Trödel 22:55, 2 October 2007 (UTC)
Thx for making the changes - I have deleted the two templates do you know of generic templates to convert ft to m and acres to hectares? -- Trödel 19:11, 5 October 2007 (UTC)
Thx for the links - I had been looking at ft to m a little and playing with it - but then didn't have time this weekend to do anything. I've added it to my mental to do list -- Trödel 19:55, 8 October 2007 (UTC)
Everything is working great. But I haven't figured out how all the sub-templates work - I see you are making the length shorter by using -site-floor, etc. but don't have time to go through it all right now. If you could give me a brief explanation of what you did - then I'll do some detailed document it on the talk page for future generations :) Thx -- Trödel 00:09, 12 October 2007 (UTC)
Wow - thanks for the detailed explanation. I'll included it here: Wikipedia:WikiProject Latter Day Saint movement/Temples. -- Trödel 15:46, 15 October 2007 (UTC)
D'you know what a mad lib is? It's a phrase in which you switch certain words with another word of the same part of speech, so the end result is ridiculous, and funny. Here, I decided to share this with someone to humor you (and myself), as I have nothing else to do and I am tired. Kaktibhar 08:42, 15 October 2007 (UTC)
A Rough Day
"It all started when I awoke with a black pain in my eyebrows. Then, my octometrist was late. We got plucked in traffic for One thousand, two hundred thirty-four years, which made me stinky for my meeting with Sean Connery. I apologized filthily to him, which seemed to make things eccentric again. But then the meeting turned into tubas, with him flying and suffering. I bled when he spilled off. On the way home we passed a hint on a pond. Suddenly the hint sliced in the road and my octometrist had to push to avoid it. In the process, I was slaughtered from the gate, landing on my eyelid. I was covered in sulfuric acid from elbow to fingernail. Could this day get any more disgraceful? My octometrist grated me back into the gate and we made our way back to the luck. I went straight to The Black Market. I was lengthy!"
Hi Jimp,
Can you make a subtemplate for dunam to square kilometers and square miles in the future? It would look like this: 4,000 dunams (4.0 km²/1.54 sq mi). It is a unit of measurement currently used in the middle east and I keep coming across it. Regards, — MJCdetroit 19:35, 20 October 2007 (UTC)
Thank you for your contributions to Wikipedia. You may make test edits in the sandbox, but for the convenience of others, please leave the sandbox heading alone. P51Mustang 22:05, 20 October 2007 (UTC)
A tag has been placed on Convert/W, requesting that it be speedily deleted from Wikipedia. This has been done because the page appears to have no meaningful content or history, and the text is unsalvageably incoherent.
If you think that this notice was placed here in error, you may contest the deletion. To do this, add {{
hangon}}
on the top of the page (just below the existing speedy deletion or "db" tag) and leave a note on the page's talk page explaining your position. Please do not remove the speedy deletion tag yourself.
If the page you created was a test, please use the sandbox for any other experiments you would like to do. Feel free to leave a message on my talk page if you have any questions about this. VivioFa teFan ( Talk, Sandbox) 07:03, 6 November 2007 (UTC)
Hi Jimp,
I had a bot go through and place of all of your subtemplates in the Category:Subtemplates of Template Convert
Please use the text:
<noinclude> [[Category:Subtemplates of Template Convert]] </noinclude>
when creating new subtemplates. Now we'll just have to get a bot to protect everything in that category. — MJCdetroit 15:20, 9 November 2007 (UTC)
<noinclude> {{Uncategorized template}} </noinclude>
to these subtemplates. I got me thinking—some kind of categorisation of these might be useful. Of course, a catgeory such as Subtemplates of Template Convert would be the over-all category but this would be subdivided according to the function of the subtemplate and some of those subcategories would be further subdivided (e.g. unit subtemplates sorted according to what they measure). Everything would be nicely listed ... alphabetically, which isn't terribly useful (as opposed to something like
this) ... though these category pages would be the obvious place to put more useful listings. However, I then got to wondering what the cost would be in terms of pre-expand size. To my dismay whilst playing around with this in the sandbox (the main one) I found that these categories do seem to count to pre-expand size. I abandoned the idea. Now here's another use for categorisation: to guide a protection bot.<noinclude>
[[Category:Subtemplates of Template Convert]]
</noinclude>
, that's seventy bytes per subtemplate. Any one transclusion of the new Convert relies on at least five subtemplates (mulitple conversions can more than double this). A rough guestimation puts the cost of this categorisation at something like a ten to twenty percent increase in pre-expand size. Would Category:Subtemplates of Template Convert have any further use after the protection bot had been through?Hi Jimp,
After I switch template convert back to the new version, would you mind if I temporarily downgraded the protection so that all users can edit (in this case revert) it if necessary? —
MJCdetroit
00:04, 13 November 2007 (UTC)
You'll need to expand that explanation table at {{ convert/doc}}. I would suggest stealing a much as you can from {{ ConvertW}} and {{ ConvertV}}. — MJCdetroit 03:39, 13 November 2007 (UTC)
Apparently, you changed conversion templates at Greg Skrepenak and Canon PowerShot TX1 incorrectly. I am not sure what you were trying to do.-- TonyTheTiger ( t/ c/ bio/ WP:LOTD) 00:04, 13 November 2007 (UTC)
Hi Jimp, I saw you were trying to figure out something in Category:Unit display/doc. I created that file. If you have any questions about it just ask. P.S. I wanted to help with your work on {{ Convert}} but got busy outside Wikipedia. -- PatLeahy ( talk) 03:06, 13 November 2007 (UTC)
I've used {{ L to gal}} for quite a few motorcycle infoboxes (e.g. Honda Ruckus) and found it very useful. However, it displayed an error for US gallons if the second parameter was not defined. I fixed up {{ L to gal/1}} and it seems to work now. This might be moot if {{ Convert}} is taking over but I thought I'd let you know in case you want to check my work. Brianhe ( talk) 17:17, 22 November 2007 (UTC)
Hi Jimp,
When you get a chance can you create a subtemplate for {{
convert}} of sqmi ha? Also, could you explain how the subtemplate codes work? For example, what does each of the letters (u, n, j, b, h, o, etc) mean? Yea, some are self explanatory and some I can venture to guess, but it would be helpful to have them documented somewhere so that others (like me) could more easily produce some more subtemplates as needed. —
MJCdetroit
15:40, 4 December 2007 (UTC)
sqmi ha
is done. --
J
ɪ
m
p
18:08, 4 December 2007 (UTC)
Jimp: Regarding the SI multiples template and this edit you made your stated purpose was to “allow μ= option”. I guess I don’t understand how to use the template because no matter what I type into the template fields in the Kilogram article, (µ µ µ mc), I can’t get the “µg” to display. Would you please change the entry in the Kilogram article so the “µg” uses the µ symbol? I much prefer the micro symbol (µ) over the Greek mu (μ). I come from a computer and typography background and understand the reason for the creation of the Unicode µ symbol in the first place. It should be the default option in the template IMO. Greg L ( my talk) 03:48, 11 December 2007 (UTC)
Again, thanks for your efforts on {{ SI multiples}} and {{ Convert/µW·h}}. I couldn’t imagine being able to easily parse and figure out how to make templates like that and really admire and appreciate those of we volunteers who are willing to quietly go about and help others by working on these templates. Greg L ( my talk) 16:47, 11 December 2007 (UTC)
I noticed that you've done several updates today to Template:Infobox Ship. But from what I understand from WP:SHIPS, that template is being deprecated and replaced with the template shown at Template:Infobox Ship Example.
From talk at WP:SHIPS, it appears that no one expects Infobox Ship to go away anytime soon because of how widespread it is used; but the long term goal is to migrate all articles using it to the newer one.
Disclaimer: I'm new to WP:SHIPS, and not a member of the project as yet. I just saw your updates and thought I would point this out in case you weren't aware as yet. --- Barek ( talk • contribs) - 16:57, 11 December 2007 (UTC)
Jimp: What does the “tl” in {{tl|SI multiples}} stand for and is there an equivalent syntax to do the same thing with links to images? Greg L ( my talk) 20:53, 13 December 2007 (UTC)
I hope I have a solution to formatting numbers you approve of. Please see this update, as well as the post immediately preceding that one. Greg L ( my talk) 01:01, 20 December 2007 (UTC)
Jimp, check out this part of Font size. As far as I can see, this article has been using decimal-delimited formatting since this 1 April 2006 version. As you can see however, the article has been using simple spaces (not even the non-breaking type). I submit that Wikipedia could really benefit from an easy-to-use template. I took a peak at perl, it appears to be totally beyond my expertise. Would making one take a crap-pile of time? Greg L ( my talk) 03:30, 24 December 2007 (UTC)
* '''0.376 065 mm''' (0.0249% larger than Didot's point) — the traditional value in European printers' offices
* '''0.376 000 mm''' (0.0076% larger) — used by [[:de:H. Berthold AG|Hermann Berthold]] (1831–1904) and many others
* '''0.375 940 mm''' (0.0084% smaller) — [[Jan Tschichold]] (1902–1974), who used 266 points in 100 mm
* '''0.375 000 mm''' (0.2584% smaller) — proposed in 1975, but never adopted
It’s clear that the simple use of full-width spaces isn’t an uncommon technique whatsoever on Wikipedia. Even though the regular-size spaces are large and make numeric strings appear like separate values, it seems readers readily understand and adapt. This common-sense observation flies in the face of SMcCandlish and his reasoning for opposing a template. He wrote “It [delimited decimal strings] is not understood by most readers”. Hogwash. Many Wikipedia articles have displayed numeric strings for years that have had full-width spaces in them. So it’s obvious on the face of it that using em-based span control to delimit would make it even easier for readers to recognize and understand what they’re looking at.
I think Font size is a textbook example of how Wikipedia could benefit from a template for delimiting numeric values with proper-size, em-based pair kerning (span control). It would make editing much easier, harmonize numeric strings across articles, make numeric strings much easier to understand, make numeric strings look more professional, and make numeric strings true, Excel-pasteable numeric values. Greg L ( my talk) 09:15, 25 December 2007 (UTC)
I found a book in the bookstore called Not Just Cartoons: Nicktoons! by Jerry Beck. I'm not going to buy it and join the project, but I will ask the other members to get the book so that they can add real world information about various fictional characters.
This makes the creation of separate articles for *many* fictional characters feasible. Having information about the development of the character will make the articles satisfy Wikipedia:Notability (fiction)
In this case, the source has a lot of information about Ren and Stimpy and one could possibly write separate articles for each character. WhisperToMe ( talk) 06:39, 25 December 2007 (UTC)
Merry Christmas and happy New Year Jimp,
Can the default be switched on this 'st lb' subtemplate so that it reads X st X lb (X kg/X lb)? I am not asking that it be done (yet), just if it is easily possible? I think that someone may have been hinting that the lb (X lb/... confuses them.
{{convert|13|st|7|lb|0|abbr=on|lk=on}} to produce 13 st 7 lb (86 kg; 189 lb)
Regards, —
MJCdetroit (
talk)
14:25, 27 December 2007 (UTC)
{{
convert/and/lb}}
not {{
convert/st lb}}
, the latter gives you conversions to both stones and pounds, e.g. {{convert|100|kg|st lb}} gives 100 kilograms (16 st; 220 lb).
J
ɪ
m
p
19:18, 27 December 2007 (UTC)Jimp, nice to hear from you. My response to your post is here. Greg L ( my talk) 20:46, 27 December 2007 (UTC)
The da Vinci Barnstar | ||
I thought I knew how to code complex templates... then I saw {{ convert}}. This is for not going insane. — Random832 16:47, 11 January 2008 (UTC) |
The Template Barnstar is bestowed upon you | ||
For the HUGH overhaul of {{ convert}}. Wikipedia is better off for having you— the 800 lb (363 kg; 57 st 2 lb) gorilla of template construction— around. — MJCdetroit (yak) 00:34, 13 January 2008 (UTC) |
Jimp,
Could you please verify my copy, paste, and tweek technique of {{
Convert/ha sqmi}}? That will also need the category added to it.
Also, could you create an explanation page of what all the sub template parameter letters mean? Some are ease to figure out, b= is base in an SI unit, where area is in sq meters, but others are not so easy. Like what is j=? In any case, an explanation page is very much needed. Thanks — MJCdetroit (yak) 18:03, 14 January 2008 (UTC)
Hi again Jimp,
I've created a series of sub-templates based on population density. They are some what subdivided into a "/unit" and a "PD/unit". The "PD/unit" will added the words "inhabitants per unit X. Think that everything is correct but a second set of eyes (yours) can't hurt. However, I am getting one weird error/oddity with the /acre and PD/acre templates. They don't abbreviate like they should, i.e /acre and not per acre, etc—see below. Can you please proofread the following subtemplates? P.S. I haven't created any multiple sub templates yet, so no converting per acre into per sq km and per sq mile.
{{convert|100|/sqkm}} -> 100 per square kilometre (260/sq mi)
{{convert|100|PD/sqkm}} -> 100 inhabitants per square kilometre (260/sq mi)
{{convert|100|/ha}} -> 100 per hectare (40/acre)
{{convert|100|PD/ha}} -> 100 inhabitants per hectare (40/acre)
{{convert|100|/acre}} -> 100 per acre (250/ha)
{{convert|100|PD/acre}} -> 100 inhabitants per acre (250/ha)
{{convert|100|/sqmi}} -> 100 per square mile (39/km2)
{{convert|100|PD/sqmi}} -> 100 inhabitants per square mile (39/km2)
{{convert|100|/sqmi|/acre}} -> 100 per square mile (0.16/acre)
{{convert|100|PD/sqmi|PD/acre}} -> 100 inhabitants per square mile (0.16/acre)
{{convert|100|/acre|/sqmi}} -> 100 per acre (64,000/sq mi)
{{convert|100|PD/acre|PD/sqmi}} -> 100 inhabitants per acre (64,000/sq mi)
{{convert|100|/ha|/sqkm}} -> 100 per hectare (10,000/km2)
{{convert|100|PD/ha|PD/sqkm}} -> 100 inhabitants per hectare (10,000/km2)
— MJCdetroit (yak) 16:43, 21 January 2008 (UTC)
h
(this is for adjectives) and exact figures (i.e. fractions) for b
(do you calculations with excat figures and round at the end).10000⁄9144×10000⁄9144×1⁄22×1⁄220 m−2 | = 1250⁄1143×1250⁄1143×1⁄22×1⁄220 m−2 |
= 1250⁄1143×125⁄1143×1⁄22×1⁄22 m−2 | |
= 625⁄1143×125⁄1143×1⁄11×1⁄22 m−2 | |
= 625×125⁄1143×1143×11×22 m−2 | |
= 78125⁄316160658 m−2 |
Thanks for the heads-up. 4u1e ( talk) 10:09, 15 January 2008 (UTC)
See a full draft of the proposal |
---|
|
Progress, yes? Hope to see you there, Jimp.
– Noetica♬♩ Talk 07:18, 16 January 2008 (UTC)
Template:Aust Beer Glass has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for Deletion page. Thank you. -- Mark Chovain 08:18, 17 January 2008 (UTC)
Thanks for your note. Can you tell me why it's been removed though? Thanks AreJay ( talk) 12:36, 17 January 2008 (UTC)