5.56×30mm MINSAS | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Personal defense weapon | |||||||
Place of origin | India | |||||||
Service history | ||||||||
Used by | Indian Armed Forces | |||||||
Production history | ||||||||
Designed | 2011 | |||||||
Manufacturer | Ammunition Factory Khadki [1] | |||||||
Specifications | ||||||||
Bullet diameter | 5.56 mm (0.219 in) | |||||||
Case length | 30 mm (1.2 in) | |||||||
Overall length | 42 mm (1.7 in) | |||||||
Ballistic performance | ||||||||
| ||||||||
Test barrel length: 300mm Source(s): [2] [3] |
The 5.56×30mm MINSAS is a firearm cartridge manufactured by India's Ordnance Factory Board (OFB) for close-quarters combat use. It has an effective range of 300 metres (980 ft) and good penetration against body armor. [2] OFB claims it exhibits penetration superior to 9mm. [4]
The MINSAS is being manufactured at Ammunition Factory Khadki in Pune. [5]
The first reports of the MINSAS being developed was from 2009 when the MSMC was announced to be in development. [6] DRDO reported that the MINSAS can penetrate both soft body armor and 3.5 mm MS plates at 100 meters. [3]
It was known as the 5.56×30mm INSAS, named after the planned INSAS carbine. [7]
The 5.56×30mm MINSAS round has a total length of 42 mm and a total weight of 6 g. [8] The bullet length is at 17mm and the weight at 2.6g. [8]
It has a range up to 200 meters. [3] The catridge has a muzzle velocity reportedly close to 900 m/s (3,000 ft/s), with a projectile of approximately 2.6 grams (40 grains). [9]
The MINSAS is available in Ball, Drill, Proof and Blank-type rounds. [3]
Name | Country | Type | Note |
---|---|---|---|
Modern Sub Machine Carbine | India | Submachine Gun | [10] [11] |
Amogh carbine | India | Carbine | [12] |
Zittara | India (Based on Tavor from Israel) | Carbine | [13] [14] |
5.56×30mm MINSAS | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Personal defense weapon | |||||||
Place of origin | India | |||||||
Service history | ||||||||
Used by | Indian Armed Forces | |||||||
Production history | ||||||||
Designed | 2011 | |||||||
Manufacturer | Ammunition Factory Khadki [1] | |||||||
Specifications | ||||||||
Bullet diameter | 5.56 mm (0.219 in) | |||||||
Case length | 30 mm (1.2 in) | |||||||
Overall length | 42 mm (1.7 in) | |||||||
Ballistic performance | ||||||||
| ||||||||
Test barrel length: 300mm Source(s): [2] [3] |
The 5.56×30mm MINSAS is a firearm cartridge manufactured by India's Ordnance Factory Board (OFB) for close-quarters combat use. It has an effective range of 300 metres (980 ft) and good penetration against body armor. [2] OFB claims it exhibits penetration superior to 9mm. [4]
The MINSAS is being manufactured at Ammunition Factory Khadki in Pune. [5]
The first reports of the MINSAS being developed was from 2009 when the MSMC was announced to be in development. [6] DRDO reported that the MINSAS can penetrate both soft body armor and 3.5 mm MS plates at 100 meters. [3]
It was known as the 5.56×30mm INSAS, named after the planned INSAS carbine. [7]
The 5.56×30mm MINSAS round has a total length of 42 mm and a total weight of 6 g. [8] The bullet length is at 17mm and the weight at 2.6g. [8]
It has a range up to 200 meters. [3] The catridge has a muzzle velocity reportedly close to 900 m/s (3,000 ft/s), with a projectile of approximately 2.6 grams (40 grains). [9]
The MINSAS is available in Ball, Drill, Proof and Blank-type rounds. [3]
Name | Country | Type | Note |
---|---|---|---|
Modern Sub Machine Carbine | India | Submachine Gun | [10] [11] |
Amogh carbine | India | Carbine | [12] |
Zittara | India (Based on Tavor from Israel) | Carbine | [13] [14] |