Development | |
---|---|
Designer | Ron Holder |
Location | United States |
Year | 1976 |
No. built | 400 |
Builder(s) | Vagabond Boats |
Role | Cruiser |
Name | Vagabond 17 |
Boat | |
Displacement | 950 lb (431 kg) |
Draft | 4.17 ft (1.27 m) with keel down |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 17.00 ft (5.18 m) |
LWL | 15.00 ft (4.57 m) |
Beam | 7.25 ft (2.21 m) |
Hull appendages | |
Keel/board type | swing keel |
Ballast | 345 lb (156 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 18.80 ft (5.73 m) |
J foretriangle base | 6.60 ft (2.01 m) |
P mainsail luff | 20.00 ft (6.10 m) |
E mainsail foot | 7.80 ft (2.38 m) |
Sails | |
Sailplan | Fractional rigged sloop Masthead sloop |
Mainsail area | 78.00 sq ft (7.246 m2) |
Jib/ genoa area | 62.04 sq ft (5.764 m2) |
Spinnaker area | 165 sq ft (15.3 m2) |
Total sail area | 140.04 sq ft (13.010 m2) |
The Vagabond 17 is an American trailerable sailboat that was designed by Ron Holder as a pocket cruiser and first built in 1976. [1] [2] [3]
The design was developed into the Holder 17 in 1982. [1]
The design was built by Vagabond Boats in the United States. A total of 400 boats were built, but it is now out of production. [1] [3] [4]
The Vagabond 17 is a recreational keelboat, built predominantly of fiberglass, with teak wood trim. It has a fractional sloop rig with aluminum spars. The hull has a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller and a locking swing keel. It displaces 950 lb (431 kg) and carries 345 lb (156 kg) of ballast. [1] [3]
The boat has a draft of 4.17 ft (1.27 m) with the swing keel extended and 1.67 ft (0.51 m) with it retracted, allowing beaching or ground transportation on a trailer. [1]
The design has sleeping accommodation for four people, with a split double "V"-berth in the bow and two quarter berths in the main cabin. The galley includes a sink and water tank. The head is located behind a partial bulkhead. [3]
For sailing the design can be equipped with a 150% genoa and optional winches for handling it. There is a bow-mounted stainless steel pulpit and the hull is equipped with positive flotation. It can be equipped with an asymmetrical spinnaker of 165 sq ft (15.3 m2). [3] [5]
In a 1994 review Richard Sherwood described the design as, "a little overnighter". [3]
A Sailrite review noted, "the Vagabond 17 small cabin but it is roomy enough for a couple or a small family. With a galley and private head it is great for short overnight trips. It has a locking swing keel which makes for easy launching and beaching." [5]
Related development
Similar sailboats
Development | |
---|---|
Designer | Ron Holder |
Location | United States |
Year | 1976 |
No. built | 400 |
Builder(s) | Vagabond Boats |
Role | Cruiser |
Name | Vagabond 17 |
Boat | |
Displacement | 950 lb (431 kg) |
Draft | 4.17 ft (1.27 m) with keel down |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 17.00 ft (5.18 m) |
LWL | 15.00 ft (4.57 m) |
Beam | 7.25 ft (2.21 m) |
Hull appendages | |
Keel/board type | swing keel |
Ballast | 345 lb (156 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 18.80 ft (5.73 m) |
J foretriangle base | 6.60 ft (2.01 m) |
P mainsail luff | 20.00 ft (6.10 m) |
E mainsail foot | 7.80 ft (2.38 m) |
Sails | |
Sailplan | Fractional rigged sloop Masthead sloop |
Mainsail area | 78.00 sq ft (7.246 m2) |
Jib/ genoa area | 62.04 sq ft (5.764 m2) |
Spinnaker area | 165 sq ft (15.3 m2) |
Total sail area | 140.04 sq ft (13.010 m2) |
The Vagabond 17 is an American trailerable sailboat that was designed by Ron Holder as a pocket cruiser and first built in 1976. [1] [2] [3]
The design was developed into the Holder 17 in 1982. [1]
The design was built by Vagabond Boats in the United States. A total of 400 boats were built, but it is now out of production. [1] [3] [4]
The Vagabond 17 is a recreational keelboat, built predominantly of fiberglass, with teak wood trim. It has a fractional sloop rig with aluminum spars. The hull has a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller and a locking swing keel. It displaces 950 lb (431 kg) and carries 345 lb (156 kg) of ballast. [1] [3]
The boat has a draft of 4.17 ft (1.27 m) with the swing keel extended and 1.67 ft (0.51 m) with it retracted, allowing beaching or ground transportation on a trailer. [1]
The design has sleeping accommodation for four people, with a split double "V"-berth in the bow and two quarter berths in the main cabin. The galley includes a sink and water tank. The head is located behind a partial bulkhead. [3]
For sailing the design can be equipped with a 150% genoa and optional winches for handling it. There is a bow-mounted stainless steel pulpit and the hull is equipped with positive flotation. It can be equipped with an asymmetrical spinnaker of 165 sq ft (15.3 m2). [3] [5]
In a 1994 review Richard Sherwood described the design as, "a little overnighter". [3]
A Sailrite review noted, "the Vagabond 17 small cabin but it is roomy enough for a couple or a small family. With a galley and private head it is great for short overnight trips. It has a locking swing keel which makes for easy launching and beaching." [5]
Related development
Similar sailboats