PhotosLocation


ulceby+railway+station Latitude and Longitude:

53°37′09″N 0°18′03″W / 53.61930°N 0.30079°W / 53.61930; -0.30079
From Wikipedia, the free encyclopedia

Ulceby
National Rail
General information
Location Ulceby, North Lincolnshire
England
Coordinates 53°37′09″N 0°18′03″W / 53.61930°N 0.30079°W / 53.61930; -0.30079
Grid reference TA124149
Managed by East Midlands Railway
Platforms1
Other information
Station codeULC
Classification DfT category F2
History
Original company Great Grimsby and Sheffield Junction Railway
Pre-grouping Great Central Railway
Post-grouping LNER
Key dates
1 March 1848opened
Passengers
2018/19Decrease 7,320
2019/20Decrease 7,190
2020/21Decrease 1,096
2021/22Increase 2,720
2022/23Increase 2,860
Notes
Passenger statistics from the Office of Rail and Road

Ulceby railway station serves the village of Ulceby in North East Lincolnshire, England. It was built by the Great Grimsby and Sheffield Junction Railway in 1848 and is located at Ulceby Skitter.

It is managed by East Midlands Railway and served by its trains on the Barton line between Cleethorpes and Barton-on-Humber.

The station layout is somewhat unusual in that all passenger trains use a single platform, even though the station is located on a double track line. There are junctions at either end of the station, as the branch line from Habrough to Barton-on-Humber meets and then diverges from the busy freight-only line from Brocklesby to Immingham Dock. These junctions, and the adjacent level crossing were controlled from Ulceby Junction signal box at the southern end of the station, however this was demolished in January 2016 when the crossing and signals were automated. The station originally had two platforms, but this was reduced to a single wooden platform when the line was resignalled in the 1980s.

Services

All services at Ulceby are operated by East Midlands Railway using Class 170 DMUs.

The typical off-peak service is one train every two hours in each direction between Cleethorpes and Barton-on-Humber. [1]

On Sundays, the station is served by four trains per day in each direction during the summer months only. No services call at the station on Sundays during the winter months.

Preceding station National Rail National Rail Following station
Thornton Abbey   East Midlands Railway
  Habrough
Historical railways
Line open, station closed
Great Central Railway
Line open, station closed

References

References

  1. ^ Table 28 National Rail timetable, June 2024

Sources

  • King, Paul (2019). The Railways of North-east Lincolnshire, Part 2: Stations. Grimsby: Pyewipe Publications. ISBN  978-1-9164603-1-7.

External links


ulceby+railway+station Latitude and Longitude:

53°37′09″N 0°18′03″W / 53.61930°N 0.30079°W / 53.61930; -0.30079
From Wikipedia, the free encyclopedia

Ulceby
National Rail
General information
Location Ulceby, North Lincolnshire
England
Coordinates 53°37′09″N 0°18′03″W / 53.61930°N 0.30079°W / 53.61930; -0.30079
Grid reference TA124149
Managed by East Midlands Railway
Platforms1
Other information
Station codeULC
Classification DfT category F2
History
Original company Great Grimsby and Sheffield Junction Railway
Pre-grouping Great Central Railway
Post-grouping LNER
Key dates
1 March 1848opened
Passengers
2018/19Decrease 7,320
2019/20Decrease 7,190
2020/21Decrease 1,096
2021/22Increase 2,720
2022/23Increase 2,860
Notes
Passenger statistics from the Office of Rail and Road

Ulceby railway station serves the village of Ulceby in North East Lincolnshire, England. It was built by the Great Grimsby and Sheffield Junction Railway in 1848 and is located at Ulceby Skitter.

It is managed by East Midlands Railway and served by its trains on the Barton line between Cleethorpes and Barton-on-Humber.

The station layout is somewhat unusual in that all passenger trains use a single platform, even though the station is located on a double track line. There are junctions at either end of the station, as the branch line from Habrough to Barton-on-Humber meets and then diverges from the busy freight-only line from Brocklesby to Immingham Dock. These junctions, and the adjacent level crossing were controlled from Ulceby Junction signal box at the southern end of the station, however this was demolished in January 2016 when the crossing and signals were automated. The station originally had two platforms, but this was reduced to a single wooden platform when the line was resignalled in the 1980s.

Services

All services at Ulceby are operated by East Midlands Railway using Class 170 DMUs.

The typical off-peak service is one train every two hours in each direction between Cleethorpes and Barton-on-Humber. [1]

On Sundays, the station is served by four trains per day in each direction during the summer months only. No services call at the station on Sundays during the winter months.

Preceding station National Rail National Rail Following station
Thornton Abbey   East Midlands Railway
  Habrough
Historical railways
Line open, station closed
Great Central Railway
Line open, station closed

References

References

  1. ^ Table 28 National Rail timetable, June 2024

Sources

  • King, Paul (2019). The Railways of North-east Lincolnshire, Part 2: Stations. Grimsby: Pyewipe Publications. ISBN  978-1-9164603-1-7.

External links


Videos

Youtube | Vimeo | Bing

Websites

Google | Yahoo | Bing

Encyclopedia

Google | Yahoo | Bing

Facebook