To see the current results, it may be necessary to
.Information from the following may be copied, then pasted into Module:Convert/extra to define a new unit.
},
".-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for -- read-only access to this module so that it is loaded only once per page. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. -- -- These data tables follow: -- all_units all properties for a unit, including default output -- default_exceptions exceptions for default output ('kg' and 'g' have different defaults) -- link_exceptions exceptions for links ('kg' and 'g' have different links) -- -- These tables are generated by a script which reads the wikitext of a page that -- documents the required properties of each unit; see [[:en:Module:Convert/doc]]. --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local all_units = { ["isp"] = { name1 = "second", symbol = "s", utype = "speed", scale = 9.80665, default = "km/s", link = "Specific impulse", }, ["km/h"] = { name1 = "kilometre per hour", name1_us = "kilometer per hour", name2 = "kilometres per hour", name2_us = "kilometers per hour", symbol = "km/h", utype = "speed", scale = 0.27777777777777779, default = "mph", link = "Kilometres per hour", }, ["km/s"] = { name1 = "kilometre per second", name1_us = "kilometer per second", name2 = "kilometres per second", name2_us = "kilometers per second", symbol = "km/s", utype = "speed", scale = 1000, default = "mi/s", link = "Metre per second", }, ["kNs/kg"] = { name2 = "kN-s/kg", symbol = "kN-s/kg", utype = "speed", scale = 1000, default = "isp", link = "Specific impulse", }, ["mi/s"] = { name1 = "mile per second", name2 = "miles per second", symbol = "mi/s", utype = "speed", scale = 1609.344, default = "km/s", link = "Mile", }, ["mph"] = { name1 = "mile per hour", name2 = "miles per hour", symbol = "mph", utype = "speed", scale = 0.44704, default = "km/h", link = "Miles per hour", }, ["Ns/kg"] = { name2 = "N-s/kg", symbol = "N-s/kg", utype = "speed", scale = 1, default = "isp", link = "Specific impulse", }, ["si tsfc"] = { name2 = "g/(kN·s)", symbol = "g/(kN·s)", utype = "speed", scale = 9.9999628621379242e-7, invert = -1, iscomplex= true, default = "tsfc", link = "Thrust specific fuel consumption", }, ["tsfc"] = { name2 = "lb/(lbf·h)", symbol = "lb/(lbf·h)", utype = "speed", scale = 2.832545036049801e-5, invert = -1, iscomplex= true, default = "si tsfc", link = "Thrust specific fuel consumption", }, ["kWh/100mi"] = { name1 = "kilowatt-hour per 100 miles", name2 = "kilowatt-hours per 100 miles", symbol = "kW-hrs/100 mi", utype = "speed", scale = 22.3694, default = "mpge", link = "miles per gallon gasoline equivalent", }, ["kWh/100km"] = { name1 = "kilowatt-hour per 100 kilometres", name1_us = "kilowatt-hour per 100 kilometers", name2 = "kilowatt-hours per 100 kilometres", name2_us = "kilowatt-hours per 100 kilometers", symbol = "kWh/100 km", utype = "speed", scale = 36, default = "mpge", link = "miles per gallon gasoline equivalent", }, ["mpge"] = { name1 = "mile per gallon gasoline equivalent", name2 = "miles per gallon gasoline equivalent", symbol = "mpg-e", utype = "speed", scale = 13.00e-6, invert = -1, iscomplex= true, default = "kWh/100mi", link = "miles per gallon gasoline equivalent", }, ["mpg-e"] = { target = "mpge", }, ["bit"] = { _name1 = "bit", _symbol = "bit", utype = "information", scale = 0.125, prefixes = 1, default = "B", link = "Bit", }, ["B"] = { _name1 = "byte", _symbol = "B", utype = "information", scale = 8, prefixes = 1, default = "bit", link = "Byte", }, } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local default_exceptions = { -- Prefixed units with a default different from that of the base unit. -- Each key item is a prefixed symbol (unitcode for engineering notation). } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local link_exceptions = { -- Prefixed units with a linked article different from that of the base unit. -- Each key item is a prefixed symbol (not unitcode). } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local per_unit_fixups = { -- Automatically created per units of form "x/y" may have their unit type -- changed, for example, "length/time" is changed to "speed". -- Other adjustments can also be specified. } return { all_units = all_units, default_exceptions = default_exceptions, link_exceptions = link_exceptions, per_unit_fixups = per_unit_fixups, }
To see the current results, it may be necessary to
.Information from the following may be copied, then pasted into Module:Convert/extra to define a new unit.
},
".-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for -- read-only access to this module so that it is loaded only once per page. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. -- -- These data tables follow: -- all_units all properties for a unit, including default output -- default_exceptions exceptions for default output ('kg' and 'g' have different defaults) -- link_exceptions exceptions for links ('kg' and 'g' have different links) -- -- These tables are generated by a script which reads the wikitext of a page that -- documents the required properties of each unit; see [[:en:Module:Convert/doc]]. --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local all_units = { ["isp"] = { name1 = "second", symbol = "s", utype = "speed", scale = 9.80665, default = "km/s", link = "Specific impulse", }, ["km/h"] = { name1 = "kilometre per hour", name1_us = "kilometer per hour", name2 = "kilometres per hour", name2_us = "kilometers per hour", symbol = "km/h", utype = "speed", scale = 0.27777777777777779, default = "mph", link = "Kilometres per hour", }, ["km/s"] = { name1 = "kilometre per second", name1_us = "kilometer per second", name2 = "kilometres per second", name2_us = "kilometers per second", symbol = "km/s", utype = "speed", scale = 1000, default = "mi/s", link = "Metre per second", }, ["kNs/kg"] = { name2 = "kN-s/kg", symbol = "kN-s/kg", utype = "speed", scale = 1000, default = "isp", link = "Specific impulse", }, ["mi/s"] = { name1 = "mile per second", name2 = "miles per second", symbol = "mi/s", utype = "speed", scale = 1609.344, default = "km/s", link = "Mile", }, ["mph"] = { name1 = "mile per hour", name2 = "miles per hour", symbol = "mph", utype = "speed", scale = 0.44704, default = "km/h", link = "Miles per hour", }, ["Ns/kg"] = { name2 = "N-s/kg", symbol = "N-s/kg", utype = "speed", scale = 1, default = "isp", link = "Specific impulse", }, ["si tsfc"] = { name2 = "g/(kN·s)", symbol = "g/(kN·s)", utype = "speed", scale = 9.9999628621379242e-7, invert = -1, iscomplex= true, default = "tsfc", link = "Thrust specific fuel consumption", }, ["tsfc"] = { name2 = "lb/(lbf·h)", symbol = "lb/(lbf·h)", utype = "speed", scale = 2.832545036049801e-5, invert = -1, iscomplex= true, default = "si tsfc", link = "Thrust specific fuel consumption", }, ["kWh/100mi"] = { name1 = "kilowatt-hour per 100 miles", name2 = "kilowatt-hours per 100 miles", symbol = "kW-hrs/100 mi", utype = "speed", scale = 22.3694, default = "mpge", link = "miles per gallon gasoline equivalent", }, ["kWh/100km"] = { name1 = "kilowatt-hour per 100 kilometres", name1_us = "kilowatt-hour per 100 kilometers", name2 = "kilowatt-hours per 100 kilometres", name2_us = "kilowatt-hours per 100 kilometers", symbol = "kWh/100 km", utype = "speed", scale = 36, default = "mpge", link = "miles per gallon gasoline equivalent", }, ["mpge"] = { name1 = "mile per gallon gasoline equivalent", name2 = "miles per gallon gasoline equivalent", symbol = "mpg-e", utype = "speed", scale = 13.00e-6, invert = -1, iscomplex= true, default = "kWh/100mi", link = "miles per gallon gasoline equivalent", }, ["mpg-e"] = { target = "mpge", }, ["bit"] = { _name1 = "bit", _symbol = "bit", utype = "information", scale = 0.125, prefixes = 1, default = "B", link = "Bit", }, ["B"] = { _name1 = "byte", _symbol = "B", utype = "information", scale = 8, prefixes = 1, default = "bit", link = "Byte", }, } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local default_exceptions = { -- Prefixed units with a default different from that of the base unit. -- Each key item is a prefixed symbol (unitcode for engineering notation). } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local link_exceptions = { -- Prefixed units with a linked article different from that of the base unit. -- Each key item is a prefixed symbol (not unitcode). } --------------------------------------------------------------------------- -- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). -- --------------------------------------------------------------------------- local per_unit_fixups = { -- Automatically created per units of form "x/y" may have their unit type -- changed, for example, "length/time" is changed to "speed". -- Other adjustments can also be specified. } return { all_units = all_units, default_exceptions = default_exceptions, link_exceptions = link_exceptions, per_unit_fixups = per_unit_fixups, }