![]() | This article is rated Start-class on Wikipedia's
content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
|
The Three State Logic and Tri-State Buffers should be put together and I think that the High Impedance (High-Z) shoudl be eloborated on more in the article.
I disagree. AW
The table showing the inputs (A,B) and the output (C) is not clear at all. I referred to this article to learn, and therefore, I am not in a position to provide a fix. Could anyone else fix this? Thanks - Todd 15:00, 9 August 2007 (UTC)
The article currently mentions tristate multiplexing or Charlieplexing.
Is there some kind of tristate multiplexing other than Charlieplexing? -- 68.0.124.33 ( talk) 14:41, 29 April 2008 (UTC)
Some editors are changing the article from 0 to 1 to active / inactive. I think this terminology just confuses things. Especially in an article about high-impedance outputs, an inactive output could be confused with a Hi-Z output.
My suggestion is that we stick to 1 and 0, on and off, and high and low -- and leave active and inactive off. These terms are not frequently used in this manner. Comments.... Jheiv ( talk) 23:17, 21 July 2008 (UTC)
An "active low" input simply means that it is triggered or enabled when the input signal is logically 0. Jheiv ( talk) 23:35, 21 July 2008 (UTC)
There should be a circuit diagram that shows how a tristate buffer is implemented. — Preceding unsigned comment added by 158.181.73.83 ( talk) 12:38, 1 June 2020 (UTC) I agree wholeheartedly — Preceding unsigned comment added by 2803:9800:9504:7B33:F515:9138:F2A8:15F7 ( talk) 17:40, 20 August 2022 (UTC)
I don't believe that the newly added short description of "Buffer in digital electronics" is accurate. Three-state (or tri-state) logic is a method allowing multiple output drivers to talk on the same bus, or allowing a signal to travel in multiple directions on the same bus. A buffer is the means to accomplish that task. Similarly, the opening of the lead focusses on the means to accomplish this, rather than the concept or reason for the need to have multiple senders on one bus. But describing this in less than 40 characters is challenging. Dhrm77 ( talk) 12:29, 22 March 2023 (UTC)
![]() | This article is rated Start-class on Wikipedia's
content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
|
The Three State Logic and Tri-State Buffers should be put together and I think that the High Impedance (High-Z) shoudl be eloborated on more in the article.
I disagree. AW
The table showing the inputs (A,B) and the output (C) is not clear at all. I referred to this article to learn, and therefore, I am not in a position to provide a fix. Could anyone else fix this? Thanks - Todd 15:00, 9 August 2007 (UTC)
The article currently mentions tristate multiplexing or Charlieplexing.
Is there some kind of tristate multiplexing other than Charlieplexing? -- 68.0.124.33 ( talk) 14:41, 29 April 2008 (UTC)
Some editors are changing the article from 0 to 1 to active / inactive. I think this terminology just confuses things. Especially in an article about high-impedance outputs, an inactive output could be confused with a Hi-Z output.
My suggestion is that we stick to 1 and 0, on and off, and high and low -- and leave active and inactive off. These terms are not frequently used in this manner. Comments.... Jheiv ( talk) 23:17, 21 July 2008 (UTC)
An "active low" input simply means that it is triggered or enabled when the input signal is logically 0. Jheiv ( talk) 23:35, 21 July 2008 (UTC)
There should be a circuit diagram that shows how a tristate buffer is implemented. — Preceding unsigned comment added by 158.181.73.83 ( talk) 12:38, 1 June 2020 (UTC) I agree wholeheartedly — Preceding unsigned comment added by 2803:9800:9504:7B33:F515:9138:F2A8:15F7 ( talk) 17:40, 20 August 2022 (UTC)
I don't believe that the newly added short description of "Buffer in digital electronics" is accurate. Three-state (or tri-state) logic is a method allowing multiple output drivers to talk on the same bus, or allowing a signal to travel in multiple directions on the same bus. A buffer is the means to accomplish that task. Similarly, the opening of the lead focusses on the means to accomplish this, rather than the concept or reason for the need to have multiple senders on one bus. But describing this in less than 40 characters is challenging. Dhrm77 ( talk) 12:29, 22 March 2023 (UTC)