![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Archive 1 | Archive 2 | Archive 3 | Archive 4 |
How can this article be expanded? What isn't covered by the SI article? In other words, what precisely are the differences between the two? I'd say this article should focus on that. And shouldn't the SI-link be presented a little more prominent? I've expanded it for that purpose, but that's not what I mean. Now it looks like it's just one of the many things it might mean, when it's really the most prominent one. Right? Also, I understand that the two are not synonyms, but that the SI system is a subset of the metric system. Or are there also SI units that are not metric units, in which case the two merely overlap? DirkvdM 08:39, 13 August 2005 (UTC)
The article says that the metre is a certain fraction of the velocity of light, which makes no sense because the metre is a unit of length, not velocity.
Should there not be more attention for the Dutch Metric System, after all it used the same units, but totally different names? ThW5 13:59, 2 May 2006 (UTC)
i think this article should explain advantages and disadvantages for the metric system.
are all applicable to the metric system whilst
is best suited to SI. I suggest that 1, 2 & 3 be moved to Metric system and 4 be moved to SI. Jimp 28Sep05
aware of the division of the history.
I have merged Metric system#The International System of Units to SI#History however what remains is to merge part of SI#History to Metric system#History (I'm changing the section name from Origins of the metric system). Also I've removed the following as it s covered elsewhere on SI, Imperial unit & US customary units. Jimp 30Sep05
Cultural issues are tied to SI, you say, Gene, but go on to say that they are tied to the metric system in general also. What I'm saying is that because these issues are general-metric-system issues they should be here. The physicist/engineer bit is about cgs vs SI, right? This a a metric issue. What is metric-system-in-general should be here (this includes spelling too) and what is specific to SI should be there. Of course, this shouldn't be stark black and white: there must be some grey areas of overlap. Jimp 3Oct05
I've brought the Spelling variations section here however, I'll leave a summary at SI#SI writing style. Jimp 5Oct05
Some traditional units of measure such as the Imperial units and the U.S. customary units are now defined as fractions of SI units.
The SI includes two classes of units which are defined and agreed upon internationally. The first of these classes are the seven SI base units for length, mass, time, temperature, electric current, luminous intensity and amount of substance. The second of these are the SI derived units. These derived units are defined in terms of the seven base units. All other quantities (e.g. work, force, power) are expressed in terms of SI derived units.
I've sorted the two History sections into Metric system vs. SI links remain between the two. Jimp 30Sep05
First of all, my apologies since this, being my first post, probably is messing with proper etiquette. Consequently, I am also reluctant to directly edit the article, any help in this regard will appreciated (besides, my English sometimes fails me, not being my native language).
I feel that the first paragraph about the metric system is somehow failing to describe the purpose of the system.
I would first state that 'metric system' simply means 'measuring system' but that since the more prominent and popular unit is the 'metre', its name got to span the whole system.
There were two main purposes for the metric system:
Regarding the first goal, the idea was to unify the very unmanageable systems of measures then in use. Each country, town and even two markets within a large city might have different units of measure. Also, different guilds had different measures and a lot of them had the same name. Nowadays we still have two different 'gallons' on each side of the pond.
It was meant to be neutral and universal in that it would not rely on the length, width or girth of any body parts of a particular ruler, as was the norm in those days, which would make the new system hard to digest to other countries. Of course, this part still became hard to digest with some monarchies of the time and so we still have an Imperial System.
In this regard, it would be important to correct the popular misconception that the metric system was a crazy thing the French came up, just like the revolutionary calendar. Though the French were, indeed, the designers, their purpose was not nationalistic at all and the metre should not be associated with Brumaire and Floreal. Indeed, they learned from the calendar which failed to be universal because it set the revolution as its starting date and the names were related to local events, such as Brumaire which comes from 'foggy', a weather condition that though widespread, does not occurr everywhere in France itself. The metric system avoided this local or nationalistic bias.
The second goal is even more important and the most significant breakthrough in the whole system. The idea that the designers of the system would not simply craft an arbitrary measuring ruler, a hollow container and a weight and say 'this are the units, come and copy them', but that they would develop a procedure for reproducing them just from the description of the units, without any need to actually carry the physical embodiments of standards around.
As you see, neither the decimalization nor the use of common prefixes for multiples were on the top of the list of goals of the metric system, though they were also very significant concepts. To offer a counter-example, Britain decimalized its currency without changing the value of the base unit which was as arbitrary as it was before (arbitrary in the sense of not related to the properties of any physical object).
A minor goal was that the base units should be handy, literally, that you could actually show them with your hands. I wonder why they failed so badly with the 'gram', which is so tiny as to be useless except in chemistry.
The article fails to mention this procedures which, otherwise, would make the whole system look quite arbitrary.
As said, the designers decided that the units would be derived from the properties of natural objects accessible to everyone, everywhere. Thus, the metre would be a fraction of a meridian of the Earth. This was no new concept at all, the nautical mile is the length of a minute of longitude over the Equator.
The meter is one thousandth of a second of a decimal arc of the Earth measured from either Pole to the Equator. A decimal arc is also a unit of the metric system (originally called 'gon', the Greek for angle) so that a right angle is composed not of ninety degrees but of a hundred 'gons'. A hundred decimal minutes make a decimal degree, and a hundred decimal seconds make a decimal minute, so, a meter is one ten millionth of the distance from any Pole to the Equator which makes the circumference of the Earth of about 40,000 kilometers (at the time it was, by definition, 'exactly' 40,000 kilometers, later measures proved it inexact).
In using a fraction of latitude from any Pole to the Equator, instead of a fraction of longitude over the Equator, as used in the nautical mile, they carried with the 'universality' of the procedure. All countries have access to a chunk of a meridian, few countries have a piece of the Equator.
The goal of making them 'handy' shows in the selection of which fraction of the Earth circumference was used to define the metre. Using the whole circumference would have made the metre four times as long. Likewise, using a millionth instead of a ten millionth would have made it ten times larger, neither of them handy. Basically, they meant the metre to be just about 'this' size (please make proper gesture with your hands).
To get the metre as fit to its definition as possible, they had to measure the circumference of the Earth which was not a practical thing to do, so they went for the next best, measure as long a fraction of a meridian as they could possibly span. They set upon the arc in between Barcelona and Dunkirk, being the longest meridian in western Europe wholly on land and, except of a small section on Spanish territory, most under territory they had access assured. The process lasted several decades and even though in some of those years there were hostilities in between Spain and France, the measuring kept going, the French scientists safely escorted by Spanish troops while in Spain.
The unit of weight was defined as the weight of a cube of water of a certain size. A cube of water a metre on a side weights a metric ton, a ton being the informal name for a million grams. In this, the designers of the system failed the 'handiness' rule because the gram is so small that it is not practical for everyday use. The kilogram is used instead, most often referred to the 'kilo', which is not a unit but the prefix for 'a thousand'.
A cube a metre on a side contains a thousand litres, thus a litre holds a kilogram of water.
So, as you see, anyone with these descriptions, access to proper instruments, who can measure the circumference of the Earth and could distill water could make their own copies of the base units.
As time passed and the instruments improved, it was found that the Earth was not 40 thousand kilometres in diameter so that either the metre had to be redefined or the linkage in between one and the other broken. The first option was out of the question, the precision of the instruments that detected the discrepancy had already spread to the then blossoming mechanical industry and changing the metre at that point would render whole batches of incompatible nuts and bolts. At the time 'screwing', as the standardizing of screws was called, was being regarded as an important stepping stone into the progress of mechanical devices and changing the metre would screw it all up, if I may be allowed a pun.
Thus, for a period, the metre was defined as the length of a ruler stored in Sevres, France. Later on, new and more precise universal means of producing a metre were developed, namely, a certain number of wavelengths of the spectrum of a known and stable natural element. At the time this was hailed as a very important development, forgetting that the original designers meant from the very beginning that the units should be derived from the properties of natural objects.
It was at the time of this interregnum, when no property of any natural object defined the base units, that several countries, unwilling to recognize their measuring system subservient to a piece of metal resting somewhere in France, that they started defining their own systems, conveniently compatible with the French metre. In this regard, I would leave the mention of the CGS, MKS and MTS systems to a rather obscure corner of history, where they belong.
The prefix system didn't encompass all the sizes we use nowadays. Kilo and mili were about as big and as small a multiple as they could figure of any practical use in those days. The concept, though, has been successfully extended to a then unconceivable degree from nanoseconds to gigabytes.
Decimalization has gone beyond the metric system to currencies and in a confusing way, to computer memory. A kilobyte sometimes is 1024 bytes, sometimes it is a thousand bytes, a proper kilo. The small difference in between the two makes the error acceptable.
One missing and very important unit which was not part of the system was the metric day. A day would have been divided into 10 hours each with a hundred minutes in each hour, a difference not really meaningful in that mainly rural society. Actually, the decimal day had been part of the reform of the calendar, which was prior to the development of the metric system, and by the time this was occurring the revolutionary calendar was already falling in disuse and finally abolished and the decimal day with it.
The 'gon' still exists nowadays, called the 'grade' which shows up in most scientific calculators though nobody uses it, 'radians' being far more practical for scientific calculations.
-- DevaSatyam 14:18, 11 October 2005 (UTC)
"exclusive national standard" -What nation is this refering to? If you are still talking about France then you need to name it again because its a new paragraph. Alternatively, just append this sentence long paragraph to the previous one.
Arfon had also added the following paragraph.
The kilogram, for the past 106 years, remains formally anchored to a single precious platinum-iridium cylinder in Sèvres, France but using a mass standard to calibrate other mass standards has its disadvantages. So, it too is about to be changed. Le Gran K, as the kilogram standard is sometimes called, is pretty imprecise, when compared to other standards. It could potentially be damaged or even destroyed and its mass changes slightly with stray dust particles and when it is cleaned. And it is available in only one laboratory. For some time, scientists have considered replacing the kilogram mass standard with a natural constant. Scientists at the US National Institute of Standards and Technology are exploring two possible ways of replacing the kilogram mass standard. Both methods would base the kilogram on the Avogadro constant, which is defined as the number of atoms in 12 grams of pure carbon-12. One method would directly determine Avogadro's number based in part on X-ray measurements in near perfect silicon crystals. Another method would determine Avogadro's number based in part on electrical measurements in a watt-balance experiment.
Arfon claimed that it is about to be changed. The fact is that this has not yet been decided. It may be changed. The paragraph has since evolved to the following.
Since 1899, the kilogram has been formally anchored to a single platinum-iridium cylinder in Sèvres, France. However, this is an imprecise mass standard as it could potentially be damaged or even destroyed, and because its mass changes slightly with stray dust particles and when it is cleaned. Furthermore, it is only available in one laboratory. Scientists at the US National Institute of Standards and Technology are exploring two possible ways of replacing the kilogram mass standard, both of which would base the measurement on Avogadro's number. One method would directly determine Avogadro's number based in part on X-ray measurements in near perfect silicon crystals; the other would determine Avogadro's number based in part on electrical measurements in a watt-balance experiment.
The kilogram is precise. The kilogram is defined to be precisely the mass of what our Arfon calls Le Gran K. The potential for loss or destruction is a problem but it doesn't entail imprecision. Nor does the variation in its mass entail imprecision though this too is a problem. It does vary in mass but because of dust and cleaning? Where did he get this info? They keep it in a sealed container (though it is cleaned). The cause of the variation is unknown. Yes, there is only one but there also are national copies. It's by comparison with the copies that the variation in mass is known. There are more than two alternatives under consideration and the US NIST is not the only organisation doing the investigation. This is all covered in great detail where this detail belongs: at the Kilogram article. All that is need here is a breif mention of the main points. This is what I'm about to do. Jimp 9Nov05
The article had read as follows
As the result of scientific progress, refinements, and different choices ... The modern metric system ... is called the International System of Units (SI) ... or, simply, "Standard". It is called "Metric" predominantly in places where it is not the main system, such as in the USA.
I've removed the following.
or, simply, "Standard". It is called "Metric" predominantly in places where it is not the main system, such as in the USA.
I've never heard SI refered to as Standard. I have, though, heard it refered to as the metric system and have never lived in the USA. I don't believe that the general public knows about the metric-SI distinction nor do I believe that most of them would care. Even in metricated countries (like my own) the distinction is not one that normally needs be made thus the terms will be used interchangeably. I'd say the term metric will be favoured because it sounds less technical.
The article also read as follows.
The acceptance of the system in revolutionary France was not particularly great. ... Napoleon, ... authorized the usage of Mesures usuelles, ancient measures defined ... this law was canceled ...
I've changed it to the following.
The acceptance of the system in revolutionary France was not particularly great. ... Napoleon, ... authorised the usage of Mesures usuelles, the traditional French measures redifined ... this law was cancelled ...
Two points: spelling and nonsense. In keeping with the rest of the article I've replaced the US spellings with Commonwealth ones as per Wikipedia Manual of Style. Secondly, and more importantly, Mesures usuelles is based on the traditional French system. It is not untrue that it is therefore based on ancient measures but this is very indirect. It is misleading to simply say that Mesures usuelles is based on ancient measures.
I've also removed the following.
and non-metric system systems of measurement are now only used in the United States, Liberia and Myanmar (Burma).
It is not true. Things are not so black-and-white. Distances on UK roads are still marked in miles and beer in UK pubs is still sold in pints. In Australian pubs beer is sold in volumes which are based on the imperial fluid ounce simply rounded to the nearest 5 ml. In Japan floor sizes are quoted in tsubo by real estate agents. Canadians often use imperial units. Liberia and Burma, on the other hand, whilst not officially metricated are likely to have adopted the system as well as most other nations in their regions ... but I'm only guessing here. Jimp 02:10, 27 January 2006 (UTC)
This article attributes the fact that the US and the UK haven't fully switched over to the metric system to general public apathy. This is not a fair, objective statement to make.
mickey 02:06, 29 March 2006 (UTC)
Nonsense- the apathy is rooted in the effort required to change everyday life to something that is uncustomary, alien, less useful day-to-day and downright unfamiliar; Then add in the infrastructural cost across the largest most industrialized nation, and don't look for the USA to metricfy until all that plant and equipment becomes obsolete and in need of replacement. I remember as a boy in the 70's how we would be switched over in the next fifteen years. Ain't gonna happen. The inertia is too great. When will it occur? Sometime after most all new cookbooks are written to present recipees in metric units instead of customary units... Have you seen the first of these released yet? Neither have I. Fra nkB 18:41, 31 March 2006 (UTC)
Seems to me there's too much overlap and not really enough reason to separate Metric system from SI. I think we should probably merge the two articles. What do others think? ProhibitOnions 18:48, 30 March 2006 (UTC)
1) [Snip, Snip, Snip] = Post on another article, albeit one somewhat related, i.e. Talk: Exponentiation. See User talk: Pol098. Fra nkB
2) Looking over your evolution of [ http://en.wikipedia.org/?title=Metric_system&diff=prev&oldid=46287122 metric system ] I am struck by the thought that your familiarity to the SI has blinded you to the need to properly introduce a topic and in particular to remember at the forefront of your mind the audience for whom you are supposed to be writing. Don't get me wrong, what you did is good writing– perhaps even great prose, but I think the prior introductory start was more appropriate and also more in line with the WP:MOS. I suggest you take a week away from the article (a good trick this aiding dispassionate reconsideration) and then comeback to compare the two styles of intro with an editors eyes rather than that of an author. You may find that others have reverted you in the iterim.
I find your explanation to be superior -- just misplaced so far at the top as it introduces the topic with not comprehensible historic phrases gradually building to the technical, but by squarely hitting the lay reader in the eye with yet another incomprehensible bit of technical jargon — the [SI]. Give it some thought and consider rearranging once again to give your fuller clearer explainations more at the end of the intro, not at the top. In the future, please try to clearly indicate in the summary when you are making such a 'major reordering' and rewording. This change took some hunting in the historypage to see where the revolution in the article occured. Thanks from all of us tracking. Best wishes, FrankB 18:32, 31 March 2006 (UTC)
The above cross post: Retrieved from " http://en.wikipedia.org/wiki/User_talk:Pol098" Fra nkB
Continuing:
3) I'm going to revert the article to the old form, and then re-revert to the current form to document the dramatic change in the intro introduced by user: Pol098
4) This should be discussion by a lot of editors, so weigh in. Fra nkB 18:57, 31 March 2006 (UTC)
5) It would have been better if the world had waited a while until the compter age was born. A system compatible with base 2 and so base 8 and 16 would have been directly compatible with computer architechture. —Preceding unsigned comment added by Jamesdavisiii ( talk • contribs)
I am quite sure that the metre is actually defined as how far light travels in a specified time (about 1/3E8 seconds) in a vacuum, not what it says in the article. This is because the speed of light in a vacuum is considered a constant.
It's a common misconception, for some reason, that people in the UK use the metric system. We are members of the European Union, of course, and officially we should have adopted the system, but the reality is quite different. Distances on road signs are still measured in miles, rather than kilometres; for the most part, produce (from, say, a greengrocer) is measured in pounds, not grams; and we weigh ourselves in stones and pounds, and measure ourselves in feet and inches. Britain is far away from having adopted the metric system. There are exceptions, of course, but by and large Britain still uses the imperial system of weights and measures. -- Stevefarrell 02:20, 4 July 2006 (UTC)
We do use metric all the time. It only the roadsigns that are imperial. I reckon we should keep the map the same. I don't want people to think we're as backwards as the yanks when it comes down to weights and measurements.
I was thinking that this world map on the page that shows what countries do not use metric should be updated. It should have another color for those countries that use both metric and imperial measurements, such as the UK.
The metric system IS used in Britain. All kids are taught only metric measurements at school. Produce MUST be purchased in metric measurements however inconvenient that might be for some old people. I only ever hear people use celcius when talking about temperature (on weather programmes and everyday life) except if they talk about body temperature (as 100F is an easy figure to remember) or if they wish to emphasise how hot it is ("London sizzles at 90F", for example, in a newspaper). The only real exception seems to be with regards to miles on road signs although all cars display kilometres and miles on the odometer and general road signs usually use metres nowadays (e.g. "service station in 200 metres"). The only other exception are drug dealers who continue to sell hashish in ounces and tenths of an ounce. Thank god we've finally got rid of the illogical metric system. The USA is now one of only 3 backward countries to continue using such a system! 213.230.129.22 22:39, 15 March 2007 (UTC)
I'm sure you meant "illogical imperial system" there, right? 195.200.34.50 17:49, 27 April 2007 (UTC)
1. Golf (yards etc)
2. Greengrocers when weighing produce out for older people
3. Miles on road signs
4. In american made mechanical components (quarter inch-bolts)
5. Dealers selling quarters and halves.
81.77.175.47
15:08, 8 June 2007 (UTC)
How are those "quarters" and "halves" actually measured? I'll bet on a scale calibrated in grams. Question then becomes, how does one know if they are getting what they asked for.
I notice that centimetres are not even mentioned in this sentence, "All lengths and distances, for example, are measured in metres, or thousandths of a metre (millimetres), or thousands of metres (kilometres), and so on." Distance can be measured in centimetres (one hundredth of a metre) and I therefore believe it should be included. I am also unsure that 'or' has been used appropriately in this sentence. I believe that a comma between listed metric measurments would suffice.-- MSmith 11:14, 20 July 2006 (UTC)
"All lengths and distances, for example, are measured in metres, or thousandths of a metre (millimetres), or thousands of metres (kilometres), and so on." The "and so on" here refers only to the example, which only mentions prefixes that express powers of ten that are multiples of three, and therefore can be misunderstood. There is no preference, in indicating measurements, for a given set of unit prefixes, namely for those expressing powers of ten that are multiples of three. You can use 12 dm, 120 cm or 1200 mm or 1.2 m or 0.12 dam or 12x10-4 km, it's all the same -- some are just unusual. The prefix chosen is a matter of convenience for the work at hand, and people prefer better-known prefixes too. Xyzt1234 10:56, 15 June 2007 (UTC)
The following text was just revised to put in some material about Jefferies, Walters, & Livingstonson. No reference was supplied to support the edit, so I have moved it here:
It was believed that in the late 18th century, Louis XVI of France charged a group of savants to develop a unified, natural and universal system of measurement to replace the disparate systems then in use. This alleged group, which allegedly included such notables as Lavoisier, allegedly produced the metric system, which was then allegedly adopted by the allegedly revolutionary government of France. However, this is not true, as the metric system was actually devised by a group of three Scottish men. One of the three, Walter Jeffreys, who was known to be an avid player and national champion of Chinese checkers, detailed the concept of the system to the other two, his good friends from college, Jeffrey Walters and Pip Livingstonson. Their creation of the metric system led them to become millionaires (by today's standards, billionaires), which also led to them being quite popular with the ladies.
-- Gerry Ashton 03:21, 10 August 2006 (UTC)
User:Samibellina made an edit to change the spelling of decimalise and recognise to use a z instead of an s. We use the UK spelling of metre; does that mean we should use UK spellings for other words too, in this article? (By the way, I don't think Samibellina got all the instances of decimalise.) -- Gerry Ashton 00:19, 16 September 2006 (UTC)
I've not bothered to read further than the title in this discussion. There is no such thing as British English, Commonwealth English or American English. There is just English, invented in England by the English. These terms are just excuses for other countries who can't spell and so bastardise a langauge we spent 1000's of years creating. If they want they can do the same and spell words however they like. —The preceding unsigned comment was added by 212.42.10.194 ( talk • contribs) 16:37 October 6, 2006 UTC.
212.42.10.194 you are a complete, euro-centric, fool. -/-
I would like to present the informal definitions of the metric units.
These definitions come in extremly handy when doing back-of-an-envelope calculations.
Examples of informal definitions of metric units.
Note: these definitions are correct with a precision of less than 1%, which is usually sufficient in every-day life.
To illustrate my point, I like the following example:
A pump with 1 horse power can lift 1 cubic feet of water 1 yard within 1 second. What is it's efficiency?
A 1 kilowatt pump can lift one liter of water 1 meter within 1 second. The efficiency is of course 1 percent.
You are incorrect that "1 Newton is the gravitation force acting on 100 gram" 0.1kg*9.81m/s^2=0.981N calling it 1N is more than 1% error. just thought i would point that out. Guglido 05:58, 5 February 2007 (UTC)
Also, never mind that the earth's equator isn't 40000 km, unless you want to keep redefining the length of a meter every time there's a new more precise estimate of the length of the equator. —Preceding unsigned comment added by 206.40.216.242 ( talk) 22:24, 29 October 2007 (UTC)
The first map shows the UK as being a metric user, the second map shows the UK as not converting to metric yet.
I don't know how to edit them.
Ordinary Person 11:06, 4 November 2006 (UTC)
This could reflect the fact that Britain has adopted the metric system but hasn't fully metricized, since the first map shows what countries use the metric system and the second shows which ones have metricized. SteveSims 03:57, 9 January 2007 (UTC)
I realise 70.137.135.191 is not finished editing, but I hope he or she will be a bit more concise and not put the same facts in two different sections.
Also, this article uses UK spelling. Is artefact the correct UK spelling for the word that Americans write as artifact? -- Gerry Ashton 23:50, 26 November 2006 (UTC)
The two images contradict each other in term of metrication of the UK. (Images in opening section and in the history section). Can we agree on the terms, that the UK is officially using the metric system, and to reflect this consistently in both images? In my opinion it's rather irrelevant that some old English imperial measurements are still used in every days life in the UK (e.g. half-a-pint of beer). MikeZ 12:32, 12 January 2007 (UTC)
Thailand uses the metric system, contrary to the indication on the map. Traditional units are also used but the official system is still metric.
Requesting update to the map.
References: http://www.cicc.or.jp/english/hyoujyunka/databook/221.htm http://www.nationsencyclopedia.com/Asia-and-Oceania/Thailand.html http://www.tourismthailand.org/about/aboutthailand.aspx —The preceding unsigned comment was added by Pandafaust ( talk • contribs) 05:10, 19 February 2007 (UTC).
The country colored blue in the map is not Thailand. That's Myanmar (Burma).
I don't know if Myanmar uses the metric system or not, but I just wanted to point out that the country someone thought was Thailand is actually Myanmar. —The preceding unsigned comment was added by 160.129.150.61 ( talk) 00:22, 22 February 2007 (UTC).
Why do these countries not use the metric system? Some explaination should be given why every country in the world except these three don't. 211.30.75.123 03:57, 16 March 2007 (UTC)
I want to reassure Both Myanmar(Burma) and Liberia that the USA will defend you with all the power at their disposal. This evil plot called metrication must be stopped. Ha. Oh yeah. Don't forget your bodily fluids. Uhoh have to run. Those damn bodily fluids again. —Preceding unsigned comment added by 216.108.207.40 ( talk) 22:16, 16 May 2009 (UTC)
It is an urban ledgend that these two countries don't use the metric system. The reality is that when the survey was taken back in the '70s, only they and the US had made no official intent to change. However, both of these countries have slowly adopted the metric system due to their trade partners being fully metric. Travellers to both countries have found of mixture of units used. Metric for things new and modern and non-metric for remnant products that haven't faded from use yet, such as old vintage cars or older petrol pumps.
Inches in these countries are just trade names. You can't actually purchase anything by the inch. The same with pints. A pint is just a trade name for a glass. Pints vary in capacity from 400 to 600 mL depending on the location. The reality is that non-metric hangs on in remnant applications, but anything new is metric.
US law requires the use of the metric system when dealing with the government. If a company constructs a building for the government, it must be metric. Even NASA must now be metric. Metric is used in 40+ % of American industry and all products once made in the US in inches or other non-metric measures and now made outside the US are metric. Thus americans who buy and use imports are using a metric product. American made cars are fully metric too. America's new industries are metric, but america's rust belt industries (if they are still in business) tend not to be.
If American standard paper size is 279 mm x 216 mm and Canadian is 280 mm x 215 mm, then they are close, but not the same.
So basically all this amounts to the map and the whole statement that the US, (at the very least) doesn't use the metric system should probably just be removed as it is untrue and pretty much irrelevent. —Preceding unsigned comment added by 97.96.50.25 ( talk) 19:32, 28 October 2007 (UTC)
So if the United States are using the metric system, in which country I'm living here? So Florida doesn't belong to the United Statest? No one use here the metric System. Also in no school they teach the metric system. —Preceding unsigned comment added by 12.218.74.180 ( talk) 22:08, 19 December 2007 (UTC)
I was taught the metric system here in the US, although I don't think I use it out of science class. —Preceding unsigned comment added by 68.108.134.25 ( talk) 00:01, 2 March 2010 (UTC)
From the box with the map of the countries who have adopted the metric system "The United States is the only industrialised country in the world that has failed to adopt the International System of Units as its predominant system of measurement." This statement is objectionable because the word "failed" is not neutral. It has negative connotations. There is nothing wrong with using the United States Customary System. A better statement would be: "The United States is the only industrialized country in the world that has not adopted the International System of Units as its predominant system of measurement." —Preceding unsigned comment added by 108.121.70.108 ( talk) 03:12, 2 February 2011 (UTC)
I support 108.121.70.108's comment (although I wish the USA would use SI units like everybody else) - the current text is perjorative. Adamtester ( talk) 05:00, 4 February 2011 (UTC)
It seems hard to find info on early history of metric system, but I understand that after Lavoisier was executed, the great physicist-mathematician Joseph Louis Lagrange replaced him as head of bureau of measures, and contributed idea of decimals, which is maybe SI's most popular aspect to this day. But no mention of Lagrange here, nor of other savants who contributed.-- MajorHazard 12:12, 7 April 2007 (UTC)
There is a sizeable chunk of text directly after the ToC, and before the "History" heading. It would be a good idea to incorporate this into the introduction, and other portions of the article. If there is an appropriate banner for this, add it to the top of the page. -- 67.161.117.214 22:01, 12 April 2007 (UTC)
I think that this article should include a list of the measures by greatest to least. —The preceding unsigned comment was added by 218.164.164.63 ( talk) 13:02, 17 April 2007 (UTC).
As there is a metric unit calculator tool already in the External Links section, I would like to propose the addition of The Converter Site ( http://www.theconvertersite.com) - a metric and imperial conversion tool - to the external links part.
Right now the content related to the various articles relating to measurement seems to be rather indifferently handled. This is not good, because at least 45 or so are of a great deal of importance to Wikipedia, and are even regarded as Vital articles. On that basis, I am proposing a new project at Wikipedia:WikiProject Council/Proposals#Measurement to work with these articles, and the others that relate to the concepts of measurement. Any and all input in the proposed project, including indications of willingness to contribute to its work, would be greatly appreciated. Thank you for your attention. John Carter 20:40, 2 May 2007 (UTC)
Two editors added some, but not all, of the SI prefixes, to the article. I have changed this to refer to the main article SI prefix. If someone feels the information should be duplicated in this article, I suggest they use the SI prefixes template, which contains all the templates. Also, the section heading would need to be changed, since the table contains some rather uncommon prefixes. -- Gerry Ashton 00:30, 4 June 2007 (UTC)
I have worked in and around the oil industry my whole life. Even though Venezuela is a metric country, the oil industry still measures depths of wells in feet, pipe in inches, pressure in psi, production in barrels per day, etc. Most of the oilfields in South American do the same. Mexico uses use meters for depth. However, for pressure they almost never the official units, but a related unit, kgf/cm2.
Another example: years ago I was at an oil industry exposition in Caracas, Venezuela. An American exhibitor had a display that included a turbine meter to measure the flow of gas in pipelines, and the display showed metric units (cubic meters of gas, basically). I commented to the salesman, he should have brought a device with US units. He answered, that when they were planning the exhibit, they asked the US Commerce department and were told that Venezuela was metric. However, when they got there, every engineer and businessman visiting the booth had remarked, "You have a good product. Too bad you don't have a device that displays US units."
I translate oil industry documents from most countries in Latin America, and it's still true that the oil industry works in US units.
I don't know how this type of information would fit into the main article, but I think it should be addressed somehow. Not to encourage the us of non-metric units, but simply to recognize that in some particular industries, that US units are still commonly used. Marzolian 19:03, 19 June 2007 (UTC)
Only reason why oil industry still uses imperial units is that oil is traded and priced by barrels or gallons. Most people (at least in continental Europe) have no idea how much gallon or barrel is. Petrol is priced by litres on petrol stations.
88.101.76.122
12:46, 6 July 2007 (UTC)
1) Just to inform you all that new research by an Australian academic working at Oxford and Cambridge universities has uncovered conclusive evidence that the metric system of measurement was first outlined by an English scientist and presented to the Royal Society 120 years before Louis 15th and his lot developed it. Not got a detailed academic reference as yet but it was reported on BBC Radio 4's "PM" programme this evening, Friday 13th July 2007. Link to a "listen again" of the programme available for the next 24 hours: http://www.bbc.co.uk/radio/aod/radio4_aod.shtml?radio4/pm - Astix 16:46, 13 July 2007 (UTC)
The metric system, and metre was first fully described by Englishman John Wilkins in 1668 in a treatise presented to the Royal Society some 120 years before the French adopted the system. It is believed that the system was transmitted to France from England via the likes of Benjamin Franklin (who spent a great deal of time in London), and produced the by-product of the decimalised paper currency system, before finding favour with American revolutionary ally Louis XV. [published work by an Australian linguistics researcher] sources: (more credible ones pending) http://blog.plover.com/physics/meter.html BBC Radio 4 2007-July-13 "PM" programme
When I have to add up columns of dollar-amounts, the advantages of a decimal system are clear. But I seldom have to tally columns of meters or litres. Do the prefixes really make it that easy to tell that 1680mm + .000553km + 279cm is a decameter? When a family member is away and I have to adjust a recipe, the disadvantages become very clear, as they will to anyone who doesn't have exactly 10 or 100 members in the household. Like many people, I generally make quick calculations or measurements in terms of halves, thirds, or quarters (ex. half-a-litre, half-a-kilometer). I recognize that wikipedia isn't the place to lobby for binary prefixes but I disagree with the idea that the decimal prefixes are advantageous just because they are decimal...they're just prefixes. It seems to me that the advantage of the prefixes is that is lets you define a lot of different measurements, at different scalse, whenever you define just one base measurment. Rods, furlongs, and miles all measure the same thing but at a different scale. The advantage of the metric prefixes is that it lets you have a variety of measurements without naming them all. 204.50.190.50 18:19, 31 July 2007 (UTC)
Sure, but you can also add up a liter of milk (>99% water, 1 liter of water masses 1 kilogram) and a kilogram of flour and figure out you'll get about two kilograms of dough. But maybe that's more of an SI problem? -- Kim Bruning 05:14, 26 August 2007 (UTC)
The version as of Sept. 4, 2007 opened by saying that the metric system is "based on" the metre and gram. It then went on to say that there are variations with different "base units". Finally, it said that SI is now considered the standard metric system. This seems a bit inconsistent to me because:
- SI, the recognized standard system, is actually "based on" the kilogram, not the gram. (Yeah, I know they're related...)
- the metre and gram do not form a complete set of base units, so it's a stretch to say the metric system is "based on" them.
- how can we say in the opening sentence that it is based on specific units, when the next sentence says there are different base units?
My proposed solution was to mention the SI base units, being the base units for the "standard" metric system. However, this change was reversed. We are now left with an intro that doesn't even mention any metric units by name. I'd like to see metre and kilogram (or gram) mentioned in the opening paragraph, if only to indicate to the reader that he or she is in the right place. Any thoughts? Awnmwad 03:54, 6 September 2007 (UTC)
Yeah sure the U.S. citizens still use english measurements in day-to-day life, but so too do UK citizens. UK citizens talk about "miles" and "gallons" or "pints", and yet the UK is considered metric. Why?
Also, nearly all things in the U.S. are measured with metric (same as the UK). My carton of milk says "3.8 liters". My pop-tarts say "400 grams" and "200 Calories" (kilocalories). My American-made car's engine is "2.2 liters" and outputs "70 kilowatts" of power according to my manual. I'm drinking a "2 liter" bottle of pop (soda? cola? coke?)..... and so on. Metric is the official measurement of U.S. business (same as the UK). - Theaveng 14:51, 27 September 2007 (UTC)
My milk jug says 1 US Gallon. I buy gasoline by the gallon and all speed limit signs are in miles/hour. I buy engine oil by the quart, fuel hose by the foot, and antifreeze by the gallon. My Chevy Silverado is advertised to have 385 HP, 17" alloy wheels, 417 ft-lb of torque,10,700 lbs of towing capacity, and a 350 cubic inch engine. I'm drinking a coke can that says 12 fluid ounces on the tin. The US is neither metric or imperial. We're both.
In scientific applications, such as prehistoric archaeology and antropology, metric measurements are used in the U.S. But in historic archaeology (post 1600), inches, feet, yards, miles, pounds, tons are used. Musicwriter ( talk) 01:15, 5 April 2009 (UTC)
![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Archive 1 | Archive 2 | Archive 3 | Archive 4 |
How can this article be expanded? What isn't covered by the SI article? In other words, what precisely are the differences between the two? I'd say this article should focus on that. And shouldn't the SI-link be presented a little more prominent? I've expanded it for that purpose, but that's not what I mean. Now it looks like it's just one of the many things it might mean, when it's really the most prominent one. Right? Also, I understand that the two are not synonyms, but that the SI system is a subset of the metric system. Or are there also SI units that are not metric units, in which case the two merely overlap? DirkvdM 08:39, 13 August 2005 (UTC)
The article says that the metre is a certain fraction of the velocity of light, which makes no sense because the metre is a unit of length, not velocity.
Should there not be more attention for the Dutch Metric System, after all it used the same units, but totally different names? ThW5 13:59, 2 May 2006 (UTC)
i think this article should explain advantages and disadvantages for the metric system.
are all applicable to the metric system whilst
is best suited to SI. I suggest that 1, 2 & 3 be moved to Metric system and 4 be moved to SI. Jimp 28Sep05
aware of the division of the history.
I have merged Metric system#The International System of Units to SI#History however what remains is to merge part of SI#History to Metric system#History (I'm changing the section name from Origins of the metric system). Also I've removed the following as it s covered elsewhere on SI, Imperial unit & US customary units. Jimp 30Sep05
Cultural issues are tied to SI, you say, Gene, but go on to say that they are tied to the metric system in general also. What I'm saying is that because these issues are general-metric-system issues they should be here. The physicist/engineer bit is about cgs vs SI, right? This a a metric issue. What is metric-system-in-general should be here (this includes spelling too) and what is specific to SI should be there. Of course, this shouldn't be stark black and white: there must be some grey areas of overlap. Jimp 3Oct05
I've brought the Spelling variations section here however, I'll leave a summary at SI#SI writing style. Jimp 5Oct05
Some traditional units of measure such as the Imperial units and the U.S. customary units are now defined as fractions of SI units.
The SI includes two classes of units which are defined and agreed upon internationally. The first of these classes are the seven SI base units for length, mass, time, temperature, electric current, luminous intensity and amount of substance. The second of these are the SI derived units. These derived units are defined in terms of the seven base units. All other quantities (e.g. work, force, power) are expressed in terms of SI derived units.
I've sorted the two History sections into Metric system vs. SI links remain between the two. Jimp 30Sep05
First of all, my apologies since this, being my first post, probably is messing with proper etiquette. Consequently, I am also reluctant to directly edit the article, any help in this regard will appreciated (besides, my English sometimes fails me, not being my native language).
I feel that the first paragraph about the metric system is somehow failing to describe the purpose of the system.
I would first state that 'metric system' simply means 'measuring system' but that since the more prominent and popular unit is the 'metre', its name got to span the whole system.
There were two main purposes for the metric system:
Regarding the first goal, the idea was to unify the very unmanageable systems of measures then in use. Each country, town and even two markets within a large city might have different units of measure. Also, different guilds had different measures and a lot of them had the same name. Nowadays we still have two different 'gallons' on each side of the pond.
It was meant to be neutral and universal in that it would not rely on the length, width or girth of any body parts of a particular ruler, as was the norm in those days, which would make the new system hard to digest to other countries. Of course, this part still became hard to digest with some monarchies of the time and so we still have an Imperial System.
In this regard, it would be important to correct the popular misconception that the metric system was a crazy thing the French came up, just like the revolutionary calendar. Though the French were, indeed, the designers, their purpose was not nationalistic at all and the metre should not be associated with Brumaire and Floreal. Indeed, they learned from the calendar which failed to be universal because it set the revolution as its starting date and the names were related to local events, such as Brumaire which comes from 'foggy', a weather condition that though widespread, does not occurr everywhere in France itself. The metric system avoided this local or nationalistic bias.
The second goal is even more important and the most significant breakthrough in the whole system. The idea that the designers of the system would not simply craft an arbitrary measuring ruler, a hollow container and a weight and say 'this are the units, come and copy them', but that they would develop a procedure for reproducing them just from the description of the units, without any need to actually carry the physical embodiments of standards around.
As you see, neither the decimalization nor the use of common prefixes for multiples were on the top of the list of goals of the metric system, though they were also very significant concepts. To offer a counter-example, Britain decimalized its currency without changing the value of the base unit which was as arbitrary as it was before (arbitrary in the sense of not related to the properties of any physical object).
A minor goal was that the base units should be handy, literally, that you could actually show them with your hands. I wonder why they failed so badly with the 'gram', which is so tiny as to be useless except in chemistry.
The article fails to mention this procedures which, otherwise, would make the whole system look quite arbitrary.
As said, the designers decided that the units would be derived from the properties of natural objects accessible to everyone, everywhere. Thus, the metre would be a fraction of a meridian of the Earth. This was no new concept at all, the nautical mile is the length of a minute of longitude over the Equator.
The meter is one thousandth of a second of a decimal arc of the Earth measured from either Pole to the Equator. A decimal arc is also a unit of the metric system (originally called 'gon', the Greek for angle) so that a right angle is composed not of ninety degrees but of a hundred 'gons'. A hundred decimal minutes make a decimal degree, and a hundred decimal seconds make a decimal minute, so, a meter is one ten millionth of the distance from any Pole to the Equator which makes the circumference of the Earth of about 40,000 kilometers (at the time it was, by definition, 'exactly' 40,000 kilometers, later measures proved it inexact).
In using a fraction of latitude from any Pole to the Equator, instead of a fraction of longitude over the Equator, as used in the nautical mile, they carried with the 'universality' of the procedure. All countries have access to a chunk of a meridian, few countries have a piece of the Equator.
The goal of making them 'handy' shows in the selection of which fraction of the Earth circumference was used to define the metre. Using the whole circumference would have made the metre four times as long. Likewise, using a millionth instead of a ten millionth would have made it ten times larger, neither of them handy. Basically, they meant the metre to be just about 'this' size (please make proper gesture with your hands).
To get the metre as fit to its definition as possible, they had to measure the circumference of the Earth which was not a practical thing to do, so they went for the next best, measure as long a fraction of a meridian as they could possibly span. They set upon the arc in between Barcelona and Dunkirk, being the longest meridian in western Europe wholly on land and, except of a small section on Spanish territory, most under territory they had access assured. The process lasted several decades and even though in some of those years there were hostilities in between Spain and France, the measuring kept going, the French scientists safely escorted by Spanish troops while in Spain.
The unit of weight was defined as the weight of a cube of water of a certain size. A cube of water a metre on a side weights a metric ton, a ton being the informal name for a million grams. In this, the designers of the system failed the 'handiness' rule because the gram is so small that it is not practical for everyday use. The kilogram is used instead, most often referred to the 'kilo', which is not a unit but the prefix for 'a thousand'.
A cube a metre on a side contains a thousand litres, thus a litre holds a kilogram of water.
So, as you see, anyone with these descriptions, access to proper instruments, who can measure the circumference of the Earth and could distill water could make their own copies of the base units.
As time passed and the instruments improved, it was found that the Earth was not 40 thousand kilometres in diameter so that either the metre had to be redefined or the linkage in between one and the other broken. The first option was out of the question, the precision of the instruments that detected the discrepancy had already spread to the then blossoming mechanical industry and changing the metre at that point would render whole batches of incompatible nuts and bolts. At the time 'screwing', as the standardizing of screws was called, was being regarded as an important stepping stone into the progress of mechanical devices and changing the metre would screw it all up, if I may be allowed a pun.
Thus, for a period, the metre was defined as the length of a ruler stored in Sevres, France. Later on, new and more precise universal means of producing a metre were developed, namely, a certain number of wavelengths of the spectrum of a known and stable natural element. At the time this was hailed as a very important development, forgetting that the original designers meant from the very beginning that the units should be derived from the properties of natural objects.
It was at the time of this interregnum, when no property of any natural object defined the base units, that several countries, unwilling to recognize their measuring system subservient to a piece of metal resting somewhere in France, that they started defining their own systems, conveniently compatible with the French metre. In this regard, I would leave the mention of the CGS, MKS and MTS systems to a rather obscure corner of history, where they belong.
The prefix system didn't encompass all the sizes we use nowadays. Kilo and mili were about as big and as small a multiple as they could figure of any practical use in those days. The concept, though, has been successfully extended to a then unconceivable degree from nanoseconds to gigabytes.
Decimalization has gone beyond the metric system to currencies and in a confusing way, to computer memory. A kilobyte sometimes is 1024 bytes, sometimes it is a thousand bytes, a proper kilo. The small difference in between the two makes the error acceptable.
One missing and very important unit which was not part of the system was the metric day. A day would have been divided into 10 hours each with a hundred minutes in each hour, a difference not really meaningful in that mainly rural society. Actually, the decimal day had been part of the reform of the calendar, which was prior to the development of the metric system, and by the time this was occurring the revolutionary calendar was already falling in disuse and finally abolished and the decimal day with it.
The 'gon' still exists nowadays, called the 'grade' which shows up in most scientific calculators though nobody uses it, 'radians' being far more practical for scientific calculations.
-- DevaSatyam 14:18, 11 October 2005 (UTC)
"exclusive national standard" -What nation is this refering to? If you are still talking about France then you need to name it again because its a new paragraph. Alternatively, just append this sentence long paragraph to the previous one.
Arfon had also added the following paragraph.
The kilogram, for the past 106 years, remains formally anchored to a single precious platinum-iridium cylinder in Sèvres, France but using a mass standard to calibrate other mass standards has its disadvantages. So, it too is about to be changed. Le Gran K, as the kilogram standard is sometimes called, is pretty imprecise, when compared to other standards. It could potentially be damaged or even destroyed and its mass changes slightly with stray dust particles and when it is cleaned. And it is available in only one laboratory. For some time, scientists have considered replacing the kilogram mass standard with a natural constant. Scientists at the US National Institute of Standards and Technology are exploring two possible ways of replacing the kilogram mass standard. Both methods would base the kilogram on the Avogadro constant, which is defined as the number of atoms in 12 grams of pure carbon-12. One method would directly determine Avogadro's number based in part on X-ray measurements in near perfect silicon crystals. Another method would determine Avogadro's number based in part on electrical measurements in a watt-balance experiment.
Arfon claimed that it is about to be changed. The fact is that this has not yet been decided. It may be changed. The paragraph has since evolved to the following.
Since 1899, the kilogram has been formally anchored to a single platinum-iridium cylinder in Sèvres, France. However, this is an imprecise mass standard as it could potentially be damaged or even destroyed, and because its mass changes slightly with stray dust particles and when it is cleaned. Furthermore, it is only available in one laboratory. Scientists at the US National Institute of Standards and Technology are exploring two possible ways of replacing the kilogram mass standard, both of which would base the measurement on Avogadro's number. One method would directly determine Avogadro's number based in part on X-ray measurements in near perfect silicon crystals; the other would determine Avogadro's number based in part on electrical measurements in a watt-balance experiment.
The kilogram is precise. The kilogram is defined to be precisely the mass of what our Arfon calls Le Gran K. The potential for loss or destruction is a problem but it doesn't entail imprecision. Nor does the variation in its mass entail imprecision though this too is a problem. It does vary in mass but because of dust and cleaning? Where did he get this info? They keep it in a sealed container (though it is cleaned). The cause of the variation is unknown. Yes, there is only one but there also are national copies. It's by comparison with the copies that the variation in mass is known. There are more than two alternatives under consideration and the US NIST is not the only organisation doing the investigation. This is all covered in great detail where this detail belongs: at the Kilogram article. All that is need here is a breif mention of the main points. This is what I'm about to do. Jimp 9Nov05
The article had read as follows
As the result of scientific progress, refinements, and different choices ... The modern metric system ... is called the International System of Units (SI) ... or, simply, "Standard". It is called "Metric" predominantly in places where it is not the main system, such as in the USA.
I've removed the following.
or, simply, "Standard". It is called "Metric" predominantly in places where it is not the main system, such as in the USA.
I've never heard SI refered to as Standard. I have, though, heard it refered to as the metric system and have never lived in the USA. I don't believe that the general public knows about the metric-SI distinction nor do I believe that most of them would care. Even in metricated countries (like my own) the distinction is not one that normally needs be made thus the terms will be used interchangeably. I'd say the term metric will be favoured because it sounds less technical.
The article also read as follows.
The acceptance of the system in revolutionary France was not particularly great. ... Napoleon, ... authorized the usage of Mesures usuelles, ancient measures defined ... this law was canceled ...
I've changed it to the following.
The acceptance of the system in revolutionary France was not particularly great. ... Napoleon, ... authorised the usage of Mesures usuelles, the traditional French measures redifined ... this law was cancelled ...
Two points: spelling and nonsense. In keeping with the rest of the article I've replaced the US spellings with Commonwealth ones as per Wikipedia Manual of Style. Secondly, and more importantly, Mesures usuelles is based on the traditional French system. It is not untrue that it is therefore based on ancient measures but this is very indirect. It is misleading to simply say that Mesures usuelles is based on ancient measures.
I've also removed the following.
and non-metric system systems of measurement are now only used in the United States, Liberia and Myanmar (Burma).
It is not true. Things are not so black-and-white. Distances on UK roads are still marked in miles and beer in UK pubs is still sold in pints. In Australian pubs beer is sold in volumes which are based on the imperial fluid ounce simply rounded to the nearest 5 ml. In Japan floor sizes are quoted in tsubo by real estate agents. Canadians often use imperial units. Liberia and Burma, on the other hand, whilst not officially metricated are likely to have adopted the system as well as most other nations in their regions ... but I'm only guessing here. Jimp 02:10, 27 January 2006 (UTC)
This article attributes the fact that the US and the UK haven't fully switched over to the metric system to general public apathy. This is not a fair, objective statement to make.
mickey 02:06, 29 March 2006 (UTC)
Nonsense- the apathy is rooted in the effort required to change everyday life to something that is uncustomary, alien, less useful day-to-day and downright unfamiliar; Then add in the infrastructural cost across the largest most industrialized nation, and don't look for the USA to metricfy until all that plant and equipment becomes obsolete and in need of replacement. I remember as a boy in the 70's how we would be switched over in the next fifteen years. Ain't gonna happen. The inertia is too great. When will it occur? Sometime after most all new cookbooks are written to present recipees in metric units instead of customary units... Have you seen the first of these released yet? Neither have I. Fra nkB 18:41, 31 March 2006 (UTC)
Seems to me there's too much overlap and not really enough reason to separate Metric system from SI. I think we should probably merge the two articles. What do others think? ProhibitOnions 18:48, 30 March 2006 (UTC)
1) [Snip, Snip, Snip] = Post on another article, albeit one somewhat related, i.e. Talk: Exponentiation. See User talk: Pol098. Fra nkB
2) Looking over your evolution of [ http://en.wikipedia.org/?title=Metric_system&diff=prev&oldid=46287122 metric system ] I am struck by the thought that your familiarity to the SI has blinded you to the need to properly introduce a topic and in particular to remember at the forefront of your mind the audience for whom you are supposed to be writing. Don't get me wrong, what you did is good writing– perhaps even great prose, but I think the prior introductory start was more appropriate and also more in line with the WP:MOS. I suggest you take a week away from the article (a good trick this aiding dispassionate reconsideration) and then comeback to compare the two styles of intro with an editors eyes rather than that of an author. You may find that others have reverted you in the iterim.
I find your explanation to be superior -- just misplaced so far at the top as it introduces the topic with not comprehensible historic phrases gradually building to the technical, but by squarely hitting the lay reader in the eye with yet another incomprehensible bit of technical jargon — the [SI]. Give it some thought and consider rearranging once again to give your fuller clearer explainations more at the end of the intro, not at the top. In the future, please try to clearly indicate in the summary when you are making such a 'major reordering' and rewording. This change took some hunting in the historypage to see where the revolution in the article occured. Thanks from all of us tracking. Best wishes, FrankB 18:32, 31 March 2006 (UTC)
The above cross post: Retrieved from " http://en.wikipedia.org/wiki/User_talk:Pol098" Fra nkB
Continuing:
3) I'm going to revert the article to the old form, and then re-revert to the current form to document the dramatic change in the intro introduced by user: Pol098
4) This should be discussion by a lot of editors, so weigh in. Fra nkB 18:57, 31 March 2006 (UTC)
5) It would have been better if the world had waited a while until the compter age was born. A system compatible with base 2 and so base 8 and 16 would have been directly compatible with computer architechture. —Preceding unsigned comment added by Jamesdavisiii ( talk • contribs)
I am quite sure that the metre is actually defined as how far light travels in a specified time (about 1/3E8 seconds) in a vacuum, not what it says in the article. This is because the speed of light in a vacuum is considered a constant.
It's a common misconception, for some reason, that people in the UK use the metric system. We are members of the European Union, of course, and officially we should have adopted the system, but the reality is quite different. Distances on road signs are still measured in miles, rather than kilometres; for the most part, produce (from, say, a greengrocer) is measured in pounds, not grams; and we weigh ourselves in stones and pounds, and measure ourselves in feet and inches. Britain is far away from having adopted the metric system. There are exceptions, of course, but by and large Britain still uses the imperial system of weights and measures. -- Stevefarrell 02:20, 4 July 2006 (UTC)
We do use metric all the time. It only the roadsigns that are imperial. I reckon we should keep the map the same. I don't want people to think we're as backwards as the yanks when it comes down to weights and measurements.
I was thinking that this world map on the page that shows what countries do not use metric should be updated. It should have another color for those countries that use both metric and imperial measurements, such as the UK.
The metric system IS used in Britain. All kids are taught only metric measurements at school. Produce MUST be purchased in metric measurements however inconvenient that might be for some old people. I only ever hear people use celcius when talking about temperature (on weather programmes and everyday life) except if they talk about body temperature (as 100F is an easy figure to remember) or if they wish to emphasise how hot it is ("London sizzles at 90F", for example, in a newspaper). The only real exception seems to be with regards to miles on road signs although all cars display kilometres and miles on the odometer and general road signs usually use metres nowadays (e.g. "service station in 200 metres"). The only other exception are drug dealers who continue to sell hashish in ounces and tenths of an ounce. Thank god we've finally got rid of the illogical metric system. The USA is now one of only 3 backward countries to continue using such a system! 213.230.129.22 22:39, 15 March 2007 (UTC)
I'm sure you meant "illogical imperial system" there, right? 195.200.34.50 17:49, 27 April 2007 (UTC)
1. Golf (yards etc)
2. Greengrocers when weighing produce out for older people
3. Miles on road signs
4. In american made mechanical components (quarter inch-bolts)
5. Dealers selling quarters and halves.
81.77.175.47
15:08, 8 June 2007 (UTC)
How are those "quarters" and "halves" actually measured? I'll bet on a scale calibrated in grams. Question then becomes, how does one know if they are getting what they asked for.
I notice that centimetres are not even mentioned in this sentence, "All lengths and distances, for example, are measured in metres, or thousandths of a metre (millimetres), or thousands of metres (kilometres), and so on." Distance can be measured in centimetres (one hundredth of a metre) and I therefore believe it should be included. I am also unsure that 'or' has been used appropriately in this sentence. I believe that a comma between listed metric measurments would suffice.-- MSmith 11:14, 20 July 2006 (UTC)
"All lengths and distances, for example, are measured in metres, or thousandths of a metre (millimetres), or thousands of metres (kilometres), and so on." The "and so on" here refers only to the example, which only mentions prefixes that express powers of ten that are multiples of three, and therefore can be misunderstood. There is no preference, in indicating measurements, for a given set of unit prefixes, namely for those expressing powers of ten that are multiples of three. You can use 12 dm, 120 cm or 1200 mm or 1.2 m or 0.12 dam or 12x10-4 km, it's all the same -- some are just unusual. The prefix chosen is a matter of convenience for the work at hand, and people prefer better-known prefixes too. Xyzt1234 10:56, 15 June 2007 (UTC)
The following text was just revised to put in some material about Jefferies, Walters, & Livingstonson. No reference was supplied to support the edit, so I have moved it here:
It was believed that in the late 18th century, Louis XVI of France charged a group of savants to develop a unified, natural and universal system of measurement to replace the disparate systems then in use. This alleged group, which allegedly included such notables as Lavoisier, allegedly produced the metric system, which was then allegedly adopted by the allegedly revolutionary government of France. However, this is not true, as the metric system was actually devised by a group of three Scottish men. One of the three, Walter Jeffreys, who was known to be an avid player and national champion of Chinese checkers, detailed the concept of the system to the other two, his good friends from college, Jeffrey Walters and Pip Livingstonson. Their creation of the metric system led them to become millionaires (by today's standards, billionaires), which also led to them being quite popular with the ladies.
-- Gerry Ashton 03:21, 10 August 2006 (UTC)
User:Samibellina made an edit to change the spelling of decimalise and recognise to use a z instead of an s. We use the UK spelling of metre; does that mean we should use UK spellings for other words too, in this article? (By the way, I don't think Samibellina got all the instances of decimalise.) -- Gerry Ashton 00:19, 16 September 2006 (UTC)
I've not bothered to read further than the title in this discussion. There is no such thing as British English, Commonwealth English or American English. There is just English, invented in England by the English. These terms are just excuses for other countries who can't spell and so bastardise a langauge we spent 1000's of years creating. If they want they can do the same and spell words however they like. —The preceding unsigned comment was added by 212.42.10.194 ( talk • contribs) 16:37 October 6, 2006 UTC.
212.42.10.194 you are a complete, euro-centric, fool. -/-
I would like to present the informal definitions of the metric units.
These definitions come in extremly handy when doing back-of-an-envelope calculations.
Examples of informal definitions of metric units.
Note: these definitions are correct with a precision of less than 1%, which is usually sufficient in every-day life.
To illustrate my point, I like the following example:
A pump with 1 horse power can lift 1 cubic feet of water 1 yard within 1 second. What is it's efficiency?
A 1 kilowatt pump can lift one liter of water 1 meter within 1 second. The efficiency is of course 1 percent.
You are incorrect that "1 Newton is the gravitation force acting on 100 gram" 0.1kg*9.81m/s^2=0.981N calling it 1N is more than 1% error. just thought i would point that out. Guglido 05:58, 5 February 2007 (UTC)
Also, never mind that the earth's equator isn't 40000 km, unless you want to keep redefining the length of a meter every time there's a new more precise estimate of the length of the equator. —Preceding unsigned comment added by 206.40.216.242 ( talk) 22:24, 29 October 2007 (UTC)
The first map shows the UK as being a metric user, the second map shows the UK as not converting to metric yet.
I don't know how to edit them.
Ordinary Person 11:06, 4 November 2006 (UTC)
This could reflect the fact that Britain has adopted the metric system but hasn't fully metricized, since the first map shows what countries use the metric system and the second shows which ones have metricized. SteveSims 03:57, 9 January 2007 (UTC)
I realise 70.137.135.191 is not finished editing, but I hope he or she will be a bit more concise and not put the same facts in two different sections.
Also, this article uses UK spelling. Is artefact the correct UK spelling for the word that Americans write as artifact? -- Gerry Ashton 23:50, 26 November 2006 (UTC)
The two images contradict each other in term of metrication of the UK. (Images in opening section and in the history section). Can we agree on the terms, that the UK is officially using the metric system, and to reflect this consistently in both images? In my opinion it's rather irrelevant that some old English imperial measurements are still used in every days life in the UK (e.g. half-a-pint of beer). MikeZ 12:32, 12 January 2007 (UTC)
Thailand uses the metric system, contrary to the indication on the map. Traditional units are also used but the official system is still metric.
Requesting update to the map.
References: http://www.cicc.or.jp/english/hyoujyunka/databook/221.htm http://www.nationsencyclopedia.com/Asia-and-Oceania/Thailand.html http://www.tourismthailand.org/about/aboutthailand.aspx —The preceding unsigned comment was added by Pandafaust ( talk • contribs) 05:10, 19 February 2007 (UTC).
The country colored blue in the map is not Thailand. That's Myanmar (Burma).
I don't know if Myanmar uses the metric system or not, but I just wanted to point out that the country someone thought was Thailand is actually Myanmar. —The preceding unsigned comment was added by 160.129.150.61 ( talk) 00:22, 22 February 2007 (UTC).
Why do these countries not use the metric system? Some explaination should be given why every country in the world except these three don't. 211.30.75.123 03:57, 16 March 2007 (UTC)
I want to reassure Both Myanmar(Burma) and Liberia that the USA will defend you with all the power at their disposal. This evil plot called metrication must be stopped. Ha. Oh yeah. Don't forget your bodily fluids. Uhoh have to run. Those damn bodily fluids again. —Preceding unsigned comment added by 216.108.207.40 ( talk) 22:16, 16 May 2009 (UTC)
It is an urban ledgend that these two countries don't use the metric system. The reality is that when the survey was taken back in the '70s, only they and the US had made no official intent to change. However, both of these countries have slowly adopted the metric system due to their trade partners being fully metric. Travellers to both countries have found of mixture of units used. Metric for things new and modern and non-metric for remnant products that haven't faded from use yet, such as old vintage cars or older petrol pumps.
Inches in these countries are just trade names. You can't actually purchase anything by the inch. The same with pints. A pint is just a trade name for a glass. Pints vary in capacity from 400 to 600 mL depending on the location. The reality is that non-metric hangs on in remnant applications, but anything new is metric.
US law requires the use of the metric system when dealing with the government. If a company constructs a building for the government, it must be metric. Even NASA must now be metric. Metric is used in 40+ % of American industry and all products once made in the US in inches or other non-metric measures and now made outside the US are metric. Thus americans who buy and use imports are using a metric product. American made cars are fully metric too. America's new industries are metric, but america's rust belt industries (if they are still in business) tend not to be.
If American standard paper size is 279 mm x 216 mm and Canadian is 280 mm x 215 mm, then they are close, but not the same.
So basically all this amounts to the map and the whole statement that the US, (at the very least) doesn't use the metric system should probably just be removed as it is untrue and pretty much irrelevent. —Preceding unsigned comment added by 97.96.50.25 ( talk) 19:32, 28 October 2007 (UTC)
So if the United States are using the metric system, in which country I'm living here? So Florida doesn't belong to the United Statest? No one use here the metric System. Also in no school they teach the metric system. —Preceding unsigned comment added by 12.218.74.180 ( talk) 22:08, 19 December 2007 (UTC)
I was taught the metric system here in the US, although I don't think I use it out of science class. —Preceding unsigned comment added by 68.108.134.25 ( talk) 00:01, 2 March 2010 (UTC)
From the box with the map of the countries who have adopted the metric system "The United States is the only industrialised country in the world that has failed to adopt the International System of Units as its predominant system of measurement." This statement is objectionable because the word "failed" is not neutral. It has negative connotations. There is nothing wrong with using the United States Customary System. A better statement would be: "The United States is the only industrialized country in the world that has not adopted the International System of Units as its predominant system of measurement." —Preceding unsigned comment added by 108.121.70.108 ( talk) 03:12, 2 February 2011 (UTC)
I support 108.121.70.108's comment (although I wish the USA would use SI units like everybody else) - the current text is perjorative. Adamtester ( talk) 05:00, 4 February 2011 (UTC)
It seems hard to find info on early history of metric system, but I understand that after Lavoisier was executed, the great physicist-mathematician Joseph Louis Lagrange replaced him as head of bureau of measures, and contributed idea of decimals, which is maybe SI's most popular aspect to this day. But no mention of Lagrange here, nor of other savants who contributed.-- MajorHazard 12:12, 7 April 2007 (UTC)
There is a sizeable chunk of text directly after the ToC, and before the "History" heading. It would be a good idea to incorporate this into the introduction, and other portions of the article. If there is an appropriate banner for this, add it to the top of the page. -- 67.161.117.214 22:01, 12 April 2007 (UTC)
I think that this article should include a list of the measures by greatest to least. —The preceding unsigned comment was added by 218.164.164.63 ( talk) 13:02, 17 April 2007 (UTC).
As there is a metric unit calculator tool already in the External Links section, I would like to propose the addition of The Converter Site ( http://www.theconvertersite.com) - a metric and imperial conversion tool - to the external links part.
Right now the content related to the various articles relating to measurement seems to be rather indifferently handled. This is not good, because at least 45 or so are of a great deal of importance to Wikipedia, and are even regarded as Vital articles. On that basis, I am proposing a new project at Wikipedia:WikiProject Council/Proposals#Measurement to work with these articles, and the others that relate to the concepts of measurement. Any and all input in the proposed project, including indications of willingness to contribute to its work, would be greatly appreciated. Thank you for your attention. John Carter 20:40, 2 May 2007 (UTC)
Two editors added some, but not all, of the SI prefixes, to the article. I have changed this to refer to the main article SI prefix. If someone feels the information should be duplicated in this article, I suggest they use the SI prefixes template, which contains all the templates. Also, the section heading would need to be changed, since the table contains some rather uncommon prefixes. -- Gerry Ashton 00:30, 4 June 2007 (UTC)
I have worked in and around the oil industry my whole life. Even though Venezuela is a metric country, the oil industry still measures depths of wells in feet, pipe in inches, pressure in psi, production in barrels per day, etc. Most of the oilfields in South American do the same. Mexico uses use meters for depth. However, for pressure they almost never the official units, but a related unit, kgf/cm2.
Another example: years ago I was at an oil industry exposition in Caracas, Venezuela. An American exhibitor had a display that included a turbine meter to measure the flow of gas in pipelines, and the display showed metric units (cubic meters of gas, basically). I commented to the salesman, he should have brought a device with US units. He answered, that when they were planning the exhibit, they asked the US Commerce department and were told that Venezuela was metric. However, when they got there, every engineer and businessman visiting the booth had remarked, "You have a good product. Too bad you don't have a device that displays US units."
I translate oil industry documents from most countries in Latin America, and it's still true that the oil industry works in US units.
I don't know how this type of information would fit into the main article, but I think it should be addressed somehow. Not to encourage the us of non-metric units, but simply to recognize that in some particular industries, that US units are still commonly used. Marzolian 19:03, 19 June 2007 (UTC)
Only reason why oil industry still uses imperial units is that oil is traded and priced by barrels or gallons. Most people (at least in continental Europe) have no idea how much gallon or barrel is. Petrol is priced by litres on petrol stations.
88.101.76.122
12:46, 6 July 2007 (UTC)
1) Just to inform you all that new research by an Australian academic working at Oxford and Cambridge universities has uncovered conclusive evidence that the metric system of measurement was first outlined by an English scientist and presented to the Royal Society 120 years before Louis 15th and his lot developed it. Not got a detailed academic reference as yet but it was reported on BBC Radio 4's "PM" programme this evening, Friday 13th July 2007. Link to a "listen again" of the programme available for the next 24 hours: http://www.bbc.co.uk/radio/aod/radio4_aod.shtml?radio4/pm - Astix 16:46, 13 July 2007 (UTC)
The metric system, and metre was first fully described by Englishman John Wilkins in 1668 in a treatise presented to the Royal Society some 120 years before the French adopted the system. It is believed that the system was transmitted to France from England via the likes of Benjamin Franklin (who spent a great deal of time in London), and produced the by-product of the decimalised paper currency system, before finding favour with American revolutionary ally Louis XV. [published work by an Australian linguistics researcher] sources: (more credible ones pending) http://blog.plover.com/physics/meter.html BBC Radio 4 2007-July-13 "PM" programme
When I have to add up columns of dollar-amounts, the advantages of a decimal system are clear. But I seldom have to tally columns of meters or litres. Do the prefixes really make it that easy to tell that 1680mm + .000553km + 279cm is a decameter? When a family member is away and I have to adjust a recipe, the disadvantages become very clear, as they will to anyone who doesn't have exactly 10 or 100 members in the household. Like many people, I generally make quick calculations or measurements in terms of halves, thirds, or quarters (ex. half-a-litre, half-a-kilometer). I recognize that wikipedia isn't the place to lobby for binary prefixes but I disagree with the idea that the decimal prefixes are advantageous just because they are decimal...they're just prefixes. It seems to me that the advantage of the prefixes is that is lets you define a lot of different measurements, at different scalse, whenever you define just one base measurment. Rods, furlongs, and miles all measure the same thing but at a different scale. The advantage of the metric prefixes is that it lets you have a variety of measurements without naming them all. 204.50.190.50 18:19, 31 July 2007 (UTC)
Sure, but you can also add up a liter of milk (>99% water, 1 liter of water masses 1 kilogram) and a kilogram of flour and figure out you'll get about two kilograms of dough. But maybe that's more of an SI problem? -- Kim Bruning 05:14, 26 August 2007 (UTC)
The version as of Sept. 4, 2007 opened by saying that the metric system is "based on" the metre and gram. It then went on to say that there are variations with different "base units". Finally, it said that SI is now considered the standard metric system. This seems a bit inconsistent to me because:
- SI, the recognized standard system, is actually "based on" the kilogram, not the gram. (Yeah, I know they're related...)
- the metre and gram do not form a complete set of base units, so it's a stretch to say the metric system is "based on" them.
- how can we say in the opening sentence that it is based on specific units, when the next sentence says there are different base units?
My proposed solution was to mention the SI base units, being the base units for the "standard" metric system. However, this change was reversed. We are now left with an intro that doesn't even mention any metric units by name. I'd like to see metre and kilogram (or gram) mentioned in the opening paragraph, if only to indicate to the reader that he or she is in the right place. Any thoughts? Awnmwad 03:54, 6 September 2007 (UTC)
Yeah sure the U.S. citizens still use english measurements in day-to-day life, but so too do UK citizens. UK citizens talk about "miles" and "gallons" or "pints", and yet the UK is considered metric. Why?
Also, nearly all things in the U.S. are measured with metric (same as the UK). My carton of milk says "3.8 liters". My pop-tarts say "400 grams" and "200 Calories" (kilocalories). My American-made car's engine is "2.2 liters" and outputs "70 kilowatts" of power according to my manual. I'm drinking a "2 liter" bottle of pop (soda? cola? coke?)..... and so on. Metric is the official measurement of U.S. business (same as the UK). - Theaveng 14:51, 27 September 2007 (UTC)
My milk jug says 1 US Gallon. I buy gasoline by the gallon and all speed limit signs are in miles/hour. I buy engine oil by the quart, fuel hose by the foot, and antifreeze by the gallon. My Chevy Silverado is advertised to have 385 HP, 17" alloy wheels, 417 ft-lb of torque,10,700 lbs of towing capacity, and a 350 cubic inch engine. I'm drinking a coke can that says 12 fluid ounces on the tin. The US is neither metric or imperial. We're both.
In scientific applications, such as prehistoric archaeology and antropology, metric measurements are used in the U.S. But in historic archaeology (post 1600), inches, feet, yards, miles, pounds, tons are used. Musicwriter ( talk) 01:15, 5 April 2009 (UTC)