This article has multiple issues. Please help
improve it or discuss these issues on the
talk page. (
Learn how and when to remove these template messages)
|
Steamboats played a major role in the 19th-century development of the Mississippi River and its tributaries, allowing practical large-scale transport of passengers and freight both up- and down-river. Using steam power, riverboats were developed during that time which could navigate in shallow waters as well as upriver against strong currents. After the development of railroads, passenger traffic gradually switched to this faster form of transportation, but steamboats continued to serve Mississippi River commerce into the early 20th century. A small number of steamboats are still used for tourist excursions in the 21st century.
The historical roots of the prototypical Mississippi steamboat, or Western Rivers steamboat, can be traced to designs by easterners like Oliver Evans, John Fitch, Daniel French, Robert Fulton, Nicholas Roosevelt, James Rumsey, and John Stevens. [1] [2] In the span of six years, the evolution of the prototypical Mississippi steamboat was well underway, as seen by the introduction of the first vessels:
Between 1811 and 1853, an estimated 7,000 fatalities occurred as a result of catastrophic boiler explosions on steamboats operating on the Mississippi and its tributaries. Due to a combination of poor boiler construction and unsafe operation, steamboat explosions were a frequent occurrence. Charles Dickens commented on the issue in his 1842 travelogue American Notes, writing, "...[American] steamboats usually blow up one or two a week in the season."
Boilers used in early Mississippi steamboats were constructed from many small pieces of riveted cast iron, as the process to produce larger, stronger sheets of metal had not yet been developed. Most suffered from poor workmanship in their construction and were prone to failure. The inherent danger of these boilers was further compounded by widespread unsafe practices in their operation. Steamboat engines were routinely pushed well beyond their design limits, tended by engineers who often lacked a full understanding of the engine's operating principles. With a complete absence of regulatory oversight, most steamboats were not adequately maintained or inspected, leading to more frequent catastrophic failures. [19]
Due to the vast superiority riverboats then held over all forms of land transportation, passengers were willing to accept the high risk of a boiler explosion. Boat operators were not required to carry any kind of insurance and were not held liable for accidents, and so had little incentive to improve safety. Only after a great number of tragedies did this situation change. In 1825, the explosion of the Teche killed 60 people. In addition, the Ohio and the Macon both exploded the following year in 1826, the Union and the Hornet in 1827, the Grampus in 1828, the Patriot and the Kenawa in 1829, the Car of Commerce and the Portsmouth in 1830, and the Moselle in 1838.
In 1811, Messrs. Fulton and Livingston, having established a shipyard at Pittsburgh, for the purpose of introducing steam navigation on the western waters, built an experimental boat for this service; and this was the first steamboat that ever floated on the western rivers." "The first western steamboat was called the Orleans.
In the summer of 1813, Daniel D. Smith altered a river barge at Pittsburgh, using an engine invented by Daniel French. The craft, called the Comet, was sent down to New Orleans and also made a few trips to Natchez, but apparently was unsuccessful in the trade...
Arrived at this port on Monday last, the Steam Boat Enterprize, Shreve, of Bridgeport, from New Orleans, in ballast, having discharged her cargo at Pittsburg. She is the first steamboat that ever made the voyage to the Mouth of the Mississippi and back.
{{
cite news}}
: Missing or empty |title=
(
help)
{{
cite news}}
: Missing or empty |title=
(
help)[
full citation needed]
This article has multiple issues. Please help
improve it or discuss these issues on the
talk page. (
Learn how and when to remove these template messages)
|
Steamboats played a major role in the 19th-century development of the Mississippi River and its tributaries, allowing practical large-scale transport of passengers and freight both up- and down-river. Using steam power, riverboats were developed during that time which could navigate in shallow waters as well as upriver against strong currents. After the development of railroads, passenger traffic gradually switched to this faster form of transportation, but steamboats continued to serve Mississippi River commerce into the early 20th century. A small number of steamboats are still used for tourist excursions in the 21st century.
The historical roots of the prototypical Mississippi steamboat, or Western Rivers steamboat, can be traced to designs by easterners like Oliver Evans, John Fitch, Daniel French, Robert Fulton, Nicholas Roosevelt, James Rumsey, and John Stevens. [1] [2] In the span of six years, the evolution of the prototypical Mississippi steamboat was well underway, as seen by the introduction of the first vessels:
Between 1811 and 1853, an estimated 7,000 fatalities occurred as a result of catastrophic boiler explosions on steamboats operating on the Mississippi and its tributaries. Due to a combination of poor boiler construction and unsafe operation, steamboat explosions were a frequent occurrence. Charles Dickens commented on the issue in his 1842 travelogue American Notes, writing, "...[American] steamboats usually blow up one or two a week in the season."
Boilers used in early Mississippi steamboats were constructed from many small pieces of riveted cast iron, as the process to produce larger, stronger sheets of metal had not yet been developed. Most suffered from poor workmanship in their construction and were prone to failure. The inherent danger of these boilers was further compounded by widespread unsafe practices in their operation. Steamboat engines were routinely pushed well beyond their design limits, tended by engineers who often lacked a full understanding of the engine's operating principles. With a complete absence of regulatory oversight, most steamboats were not adequately maintained or inspected, leading to more frequent catastrophic failures. [19]
Due to the vast superiority riverboats then held over all forms of land transportation, passengers were willing to accept the high risk of a boiler explosion. Boat operators were not required to carry any kind of insurance and were not held liable for accidents, and so had little incentive to improve safety. Only after a great number of tragedies did this situation change. In 1825, the explosion of the Teche killed 60 people. In addition, the Ohio and the Macon both exploded the following year in 1826, the Union and the Hornet in 1827, the Grampus in 1828, the Patriot and the Kenawa in 1829, the Car of Commerce and the Portsmouth in 1830, and the Moselle in 1838.
In 1811, Messrs. Fulton and Livingston, having established a shipyard at Pittsburgh, for the purpose of introducing steam navigation on the western waters, built an experimental boat for this service; and this was the first steamboat that ever floated on the western rivers." "The first western steamboat was called the Orleans.
In the summer of 1813, Daniel D. Smith altered a river barge at Pittsburgh, using an engine invented by Daniel French. The craft, called the Comet, was sent down to New Orleans and also made a few trips to Natchez, but apparently was unsuccessful in the trade...
Arrived at this port on Monday last, the Steam Boat Enterprize, Shreve, of Bridgeport, from New Orleans, in ballast, having discharged her cargo at Pittsburg. She is the first steamboat that ever made the voyage to the Mouth of the Mississippi and back.
{{
cite news}}
: Missing or empty |title=
(
help)
{{
cite news}}
: Missing or empty |title=
(
help)[
full citation needed]