Spring Drive is a name given to a series of watch movements produced by Epson in Shiojiri. The concept of using a mainspring to power a quartz timing package was first conceived in 1977 by Yoshikazu Akahane (赤羽 好和) at Suwa Seikosha [1] (now a part of Epson after a 1985 merger). [2] Specified to one second accuracy per day, [3] the movement uses a conventional gear train as in traditional mechanical watches, but rather than an escapement and balance wheel, instead features Seiko's Tri-synchro Regulator system in which power delivery to the watch hands is regulated based on a reference quartz signal. [3]
Commercially released in 1999, [2] the movement is found in watches distributed by the Seiko Watch Corporation, including its Credor, Grand Seiko, Presage, and Prospex brands.
The Spring Drive uses a conventional mainspring [3] and barrel [4] along with automatic and/or stem winding to store energy, just as in a mechanical watch. [3] However, the escapement and balance wheel in mechanical watches is replaced by Seiko's Tri-synchro Regulator system, a phase-locked loop wherein a rotor, which Seiko refers to as a "glide wheel", is powered by the mainspring barrel via a stator. The glide wheel in turn powers a reference quartz crystal and accompanying integrated circuit which controls an electromagnetic brake which then regulates the rotational speed of the glide wheel itself. [3]
The glide wheel is intended to rotate eight times per second; the rotational speed is sampled once every rotation and a variable braking force is continuously applied to maintain that target frequency. As the glide wheel directly powers the seconds hand of the watch, this results in a true continuously sweeping second hand – in contrast to the beats per time motion resulting from the back-and-forth movement of traditional mechanical watches or the tick of typical quartz watches. [3]
The movement is specified to ±15 seconds per month. [5]
The design was first conceived by Yoshikazu Akahane at Suwa Seikosha in 1977 [1] and patents were applied for it in 1982; [5] in total, no fewer than 230 patents have been applied worldwide for this movement. [6] Initial development was hindered by the high energy consumption of the reference quartz crystal and integrated circuit [5] making a watch with a then-target 48-hour power reserve impossible; [7] another attempt in 1993 was also unsuccessful for the same reason. [5] It was not until a third attempt in 1997, using a quartz crystal and integrated circuit with energy consumption approximately one one-hundredth that used in the initial attempt in 1982, [7] that a Spring Drive watch with sufficient power reserve was deemed feasible. [5] Over 600 prototypes were produced during development. [1] [3] [8]
The Spring Drive movement was announced publicly in 1997 and presented at the 1998 Basel Watch Fair. [1] [8] In 1999, the first production models were made available in Japan as limited edition, manual-wind watches in both the Credor and Seiko brands. [2] [5] [8] The first non-limited model was released in Japan in 2002. [5]
The 1st spring drive automatic-wind movement of Grand Seiko was released in September 2004, the reference number is SBGA001.[ citation needed]
The first automatic-wind Spring Drive model was released in 2005, [8] and coincided with the introduction of the Spring Drive movement to markets outside of Japan. [8]
Early models, manual wind and 48h power reserve:
Current calibers with standard features. Time accuracy: monthly rate within ±15 sec (equivalent to a daily rate of ±1 sec) and power reserve (72h) indicator.
Current calibers with higher power reserve and higher accuracy. Time accuracy: monthly rate within ±10 sec (equivalent to a daily rate of ±0.5 sec) and power reserve (5 days) indicator.
Spring Drive is a name given to a series of watch movements produced by Epson in Shiojiri. The concept of using a mainspring to power a quartz timing package was first conceived in 1977 by Yoshikazu Akahane (赤羽 好和) at Suwa Seikosha [1] (now a part of Epson after a 1985 merger). [2] Specified to one second accuracy per day, [3] the movement uses a conventional gear train as in traditional mechanical watches, but rather than an escapement and balance wheel, instead features Seiko's Tri-synchro Regulator system in which power delivery to the watch hands is regulated based on a reference quartz signal. [3]
Commercially released in 1999, [2] the movement is found in watches distributed by the Seiko Watch Corporation, including its Credor, Grand Seiko, Presage, and Prospex brands.
The Spring Drive uses a conventional mainspring [3] and barrel [4] along with automatic and/or stem winding to store energy, just as in a mechanical watch. [3] However, the escapement and balance wheel in mechanical watches is replaced by Seiko's Tri-synchro Regulator system, a phase-locked loop wherein a rotor, which Seiko refers to as a "glide wheel", is powered by the mainspring barrel via a stator. The glide wheel in turn powers a reference quartz crystal and accompanying integrated circuit which controls an electromagnetic brake which then regulates the rotational speed of the glide wheel itself. [3]
The glide wheel is intended to rotate eight times per second; the rotational speed is sampled once every rotation and a variable braking force is continuously applied to maintain that target frequency. As the glide wheel directly powers the seconds hand of the watch, this results in a true continuously sweeping second hand – in contrast to the beats per time motion resulting from the back-and-forth movement of traditional mechanical watches or the tick of typical quartz watches. [3]
The movement is specified to ±15 seconds per month. [5]
The design was first conceived by Yoshikazu Akahane at Suwa Seikosha in 1977 [1] and patents were applied for it in 1982; [5] in total, no fewer than 230 patents have been applied worldwide for this movement. [6] Initial development was hindered by the high energy consumption of the reference quartz crystal and integrated circuit [5] making a watch with a then-target 48-hour power reserve impossible; [7] another attempt in 1993 was also unsuccessful for the same reason. [5] It was not until a third attempt in 1997, using a quartz crystal and integrated circuit with energy consumption approximately one one-hundredth that used in the initial attempt in 1982, [7] that a Spring Drive watch with sufficient power reserve was deemed feasible. [5] Over 600 prototypes were produced during development. [1] [3] [8]
The Spring Drive movement was announced publicly in 1997 and presented at the 1998 Basel Watch Fair. [1] [8] In 1999, the first production models were made available in Japan as limited edition, manual-wind watches in both the Credor and Seiko brands. [2] [5] [8] The first non-limited model was released in Japan in 2002. [5]
The 1st spring drive automatic-wind movement of Grand Seiko was released in September 2004, the reference number is SBGA001.[ citation needed]
The first automatic-wind Spring Drive model was released in 2005, [8] and coincided with the introduction of the Spring Drive movement to markets outside of Japan. [8]
Early models, manual wind and 48h power reserve:
Current calibers with standard features. Time accuracy: monthly rate within ±15 sec (equivalent to a daily rate of ±1 sec) and power reserve (72h) indicator.
Current calibers with higher power reserve and higher accuracy. Time accuracy: monthly rate within ±10 sec (equivalent to a daily rate of ±0.5 sec) and power reserve (5 days) indicator.