PT-22 Recruit | |
---|---|
A refurbished Ryan PT-22 performing at the Shoreham Airshow 2012 | |
Role | Trainer |
Manufacturer | Ryan Aeronautical Company |
Primary users |
United States Army Air Forces United States Army Air Corps |
Number built | 1,048 |
Developed from | Ryan ST |
The Ryan PT-22 Recruit, the main military version of the Ryan ST, is a military trainer aircraft that was used by the United States Army Air Corps during WWII for primary pilot training.
The PT-22's fuselage is a simple monocoque structure, with .032 stressed 24ST alclad skin, and nine aluminum alloy bulkheads. The wings feature spruce spars, aluminum alloy ribs, steel compression members, with aircraft fabric covering aft to the trailing edge and aluminum alloy sheet covering from the leading edge to the spar. [1] The wings have 4° 10' of sweep back, 3° of incidence and 4° 30' dihedral. [2] [3]
The PT-22 fuel system consists of a single tank mounted forward of the front cockpit. Fuel is gravity fed to the carburetor. The oil system is a dry-sump type, with all oil stored in a tank located on the front side of the firewall in the upper section of the fuselage. The wing flaps are mechanically operated from a lever located on the left side of each cockpit. Adjustable elevator trim is provided via an elevator trim tab controllable from a handwheel mounted on the left side of each cockpit. In its original configuration, the aircraft was not equipped with an electrical system. Hydraulic brakes are provided for each wheel, controllable via the rudder pedals in each cockpit. [4]
According to Cassagneres, "The main landing gear, in fact, was the most noticeable external change from the STA in that the wheels were mounted outboard of the shock struts rather than the fork type of the earlier STs and STMs. Therefore the distance between the wheel centers was increased by a full 12 inches. The new gear was known as the 'knuckle-type' mounting." The tailwheel was steerable up to 45 degrees when it became full swivel. All main and tail landing gear used oleo struts. Each cockpit included an airspeed indicator, altimeter, oil temperature and pressure gauges, tachometer and compass. Rate of climb indicator, turn and bank indicator, and clock were optional. [3]
In order to simplify maintenance, the wheel spats and landing gear fairings were deleted in the production examples
The PT-22 was developed in 1941 from the civilian Ryan ST series. The earlier PT-20 and PT-21 were the military production versions of the Ryan ST-3 with a total of 100 built. The PT-22 was the United States Army Air Corps' first purpose built monoplane trainer. The rapid expansion of wartime aircrew training required new trainers, and the Ryan PT-22 was ordered in large numbers. [5] Named the "Recruit", it entered operational service with the U.S. Orders also were placed by the Netherlands, but were never realized as the nation capitulated to Axis forces. The small order of 25 ST-3s was redirected to the United States and redesignated as the PT-22A. Another order also came from the U.S. Navy for 100 examples. The PT series was in heavy use throughout the war years with both military and civil schools, but with the end of the war, was retired from the USAAF. [6]
The Ryan PT-22 remains a popular World War II collector aircraft.
Several PT-22 remain in flyable condition worldwide, as the aircraft continues to be a popular sport plane and warbird.
Data from Pilots Flight Operating Instructions [4] and The New Ryan [31]
General characteristics
Performance
Armament
Avionics
PT-22 Recruit | |
---|---|
A refurbished Ryan PT-22 performing at the Shoreham Airshow 2012 | |
Role | Trainer |
Manufacturer | Ryan Aeronautical Company |
Primary users |
United States Army Air Forces United States Army Air Corps |
Number built | 1,048 |
Developed from | Ryan ST |
The Ryan PT-22 Recruit, the main military version of the Ryan ST, is a military trainer aircraft that was used by the United States Army Air Corps during WWII for primary pilot training.
The PT-22's fuselage is a simple monocoque structure, with .032 stressed 24ST alclad skin, and nine aluminum alloy bulkheads. The wings feature spruce spars, aluminum alloy ribs, steel compression members, with aircraft fabric covering aft to the trailing edge and aluminum alloy sheet covering from the leading edge to the spar. [1] The wings have 4° 10' of sweep back, 3° of incidence and 4° 30' dihedral. [2] [3]
The PT-22 fuel system consists of a single tank mounted forward of the front cockpit. Fuel is gravity fed to the carburetor. The oil system is a dry-sump type, with all oil stored in a tank located on the front side of the firewall in the upper section of the fuselage. The wing flaps are mechanically operated from a lever located on the left side of each cockpit. Adjustable elevator trim is provided via an elevator trim tab controllable from a handwheel mounted on the left side of each cockpit. In its original configuration, the aircraft was not equipped with an electrical system. Hydraulic brakes are provided for each wheel, controllable via the rudder pedals in each cockpit. [4]
According to Cassagneres, "The main landing gear, in fact, was the most noticeable external change from the STA in that the wheels were mounted outboard of the shock struts rather than the fork type of the earlier STs and STMs. Therefore the distance between the wheel centers was increased by a full 12 inches. The new gear was known as the 'knuckle-type' mounting." The tailwheel was steerable up to 45 degrees when it became full swivel. All main and tail landing gear used oleo struts. Each cockpit included an airspeed indicator, altimeter, oil temperature and pressure gauges, tachometer and compass. Rate of climb indicator, turn and bank indicator, and clock were optional. [3]
In order to simplify maintenance, the wheel spats and landing gear fairings were deleted in the production examples
The PT-22 was developed in 1941 from the civilian Ryan ST series. The earlier PT-20 and PT-21 were the military production versions of the Ryan ST-3 with a total of 100 built. The PT-22 was the United States Army Air Corps' first purpose built monoplane trainer. The rapid expansion of wartime aircrew training required new trainers, and the Ryan PT-22 was ordered in large numbers. [5] Named the "Recruit", it entered operational service with the U.S. Orders also were placed by the Netherlands, but were never realized as the nation capitulated to Axis forces. The small order of 25 ST-3s was redirected to the United States and redesignated as the PT-22A. Another order also came from the U.S. Navy for 100 examples. The PT series was in heavy use throughout the war years with both military and civil schools, but with the end of the war, was retired from the USAAF. [6]
The Ryan PT-22 remains a popular World War II collector aircraft.
Several PT-22 remain in flyable condition worldwide, as the aircraft continues to be a popular sport plane and warbird.
Data from Pilots Flight Operating Instructions [4] and The New Ryan [31]
General characteristics
Performance
Armament
Avionics