RagWing RW19 Stork | |
---|---|
Role | Homebuilt aircraft |
National origin | United States |
Manufacturer | Ragwing Aircraft Designs |
Designer | Roger Mann |
First flight | August 1997 |
Introduction | 1998 |
Status | Plans no longer available |
Number built | 9 (December 2007) |
The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction. [1] [2] [3] [4] [5] [6] [7]
The RW19 is a 75% scale replica of the Fieseler Storch Second World War German liaison aircraft. The RW19 is noted for its STOL performance, equal to or better than that of the original Storch. The claimed take-off run and landing roll are 30 ft (9 m) due to a 15 mph (24 km/h) stall speed. [1] [2] [3] [4] [5] [6]
The RW19 was designed for the US experimental homebuilt aircraft category and was first flown in August 1997. It also qualifies as an Experimental Light-sport aircraft in the USA. [1] [2] [3] [4] [5] [6]
The airframe is constructed from wood and tube and covered with aircraft fabric. The landing gear is of conventional configuration. The aircraft's installed power range is 70 to 80 hp (52 to 60 kW) and the standard engine is the 70 hp (52 kW) 2si 690, although the 80 hp (60 kW) Rotax 912UL engine has also been used. [1] [2] [3] [4] [5] [6]
The RW19 was originally available as a complete kit, less only the engine, but today is only offered as plans. The designer estimates it will take 600 hours to complete the aircraft, although other estimates run from 300 to 1500 hours. [1] [3] [5] [6] [7]
Data from Kitplanes, Purdy and RagWing [1] [4] [5]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
RagWing RW19 Stork | |
---|---|
Role | Homebuilt aircraft |
National origin | United States |
Manufacturer | Ragwing Aircraft Designs |
Designer | Roger Mann |
First flight | August 1997 |
Introduction | 1998 |
Status | Plans no longer available |
Number built | 9 (December 2007) |
The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction. [1] [2] [3] [4] [5] [6] [7]
The RW19 is a 75% scale replica of the Fieseler Storch Second World War German liaison aircraft. The RW19 is noted for its STOL performance, equal to or better than that of the original Storch. The claimed take-off run and landing roll are 30 ft (9 m) due to a 15 mph (24 km/h) stall speed. [1] [2] [3] [4] [5] [6]
The RW19 was designed for the US experimental homebuilt aircraft category and was first flown in August 1997. It also qualifies as an Experimental Light-sport aircraft in the USA. [1] [2] [3] [4] [5] [6]
The airframe is constructed from wood and tube and covered with aircraft fabric. The landing gear is of conventional configuration. The aircraft's installed power range is 70 to 80 hp (52 to 60 kW) and the standard engine is the 70 hp (52 kW) 2si 690, although the 80 hp (60 kW) Rotax 912UL engine has also been used. [1] [2] [3] [4] [5] [6]
The RW19 was originally available as a complete kit, less only the engine, but today is only offered as plans. The designer estimates it will take 600 hours to complete the aircraft, although other estimates run from 300 to 1500 hours. [1] [3] [5] [6] [7]
Data from Kitplanes, Purdy and RagWing [1] [4] [5]
General characteristics
Performance
Aircraft of comparable role, configuration, and era