The origin and usage of the term metalloid is convoluted. Its origin lies in attempts, dating from antiquity, to describe metals and to distinguish between typical and less typical forms. It was first applied to metals that floated on water ( lithium, sodium and potassium), and then more popularly to nonmetals. Only recently, since the mid-20th century, has it been widely used to refer to elements with intermediate or borderline properties between metals and nonmetals.
Ancient conceptions of metals as solid, fusible and malleable substances can be found in Plato's Timaeus (c. 360 BCE) and Aristotle's Meteorology. [2] [3]
More sophisticated classification arrangements were proposed by Pseudo-Geber (in the Geber corpus, c. 1310), Paracelsus (De Natura Rerum libri nonem, 1525–6; and later works), Basil Valentine (Conclusiones, 1624), and Boerhaave (Elementa Chemiæ, 1733). They attempted to separate the more characteristic metals from substances having those characteristics to a lesser degree. Such substances included zinc, antimony, bismuth, stibnite, pyrite and galena. These were all then called semimetals or bastard metals. [4] [5] [6]
In 1735 Brandt proposed to make the presence or absence of malleability the principle of this classification. On that basis he separated mercury from the metals. The same view was adopted by Vogel (1755, Institutiones Chemiæ) and Buffon (1785, Histoire Naturelle des Minéraux). In the interim, Braun had observed the solidification of mercury by cold in 1759–60. This was confirmed by Hutchins and Cavendish in 1783. [7] The malleability of mercury then became known, and it was included amongst the metals. [4]
In 1789 Fourcroy [8] highlighted the weakness of this distinction between metals and semimetals. He said it was evident from the fact that
This idea of a semimetal, as a brittle (and thereby imperfect) [9] [10] metal, was gradually discarded after 1789 with the publication of Lavoisier's 'revolutionary' [11] Elementary Treatise on Chemistry. [12] [n 1]
In 1800, Pinkerton used the word metalloid, in its literal sense, to describe a mineral variety of pyroxene 'with metallic splendour.' [14]
In 1808, Erman and Simon suggested using the term metalloid to refer to the newly discovered elements sodium and potassium. [15] These elements were lighter than water and many chemists did not regard them as proper metals. Erman and Simon's proposal may have been made '[in] an attempt to revive this old distinction between metals and substances resembling metals'. [16] Their suggestion was ignored by the chemical community. [17]
In 1811,
Berzelius referred to nonmetallic elements as metalloids,
[17]
[18] in reference to their ability to form
oxyanions.
[19]
[20] A common oxyanion of
sulfur, for example, is the
sulfate ion SO2−
4. Many metals can do the same.
Chromium, for instance, can form the
chromate ion CrO2−
4. Berzelius' terminology was widely adopted
[17] although it was subsequently regarded by some commentators as counterintuitive,
[20] misapplied,
[12] incorrect
[21] or invalid.
[22] In 1825, in a revised German edition of his Textbook of Chemistry,
[23]
[24] Berzelius subdivided the metalloids into three classes. These were: constantly
gaseous 'gazolyta' (
hydrogen,
nitrogen,
oxygen); real metalloids (
sulfur,
phosphorus,
carbon,
boron,
silicon); and salt-forming '
halogenia' (
fluorine,
chlorine,
bromine,
iodine).
[25]
In 1844, Jackson gave the meaning of 'metalloid' as 'like metals, but wanting some of their properties.' [26] In 1845, in A dictionary of science, literature and art, Berzelius' classification of the elementary bodies was represented as: I. gazolytes; II. halogens; III. metalloids ('resemble the metals in certain aspects, but are in others widely different'); and IV. metals. [27]
In 1864, calling nonmetals 'metalloids' was still sanctioned 'by the best authorities' [28] even though this did not always seem appropriate. The greater propriety of applying the word metalloid to other elements, such as arsenic, had been considered. [28]
By as early as 1866 some authors were instead using the term nonmetal, rather than metalloid, to refer to nonmetallic elements. [29] In 1875, Kemshead observed that the elements had been subdivided into two classes—'non-metals or metalloids, and metals.' He added that '[t]he former term, although not so convenient, because a compound word, is more correct, and is now universally employed.' [30]
In 1876, Tilden protested against, 'the [still] too common though illogical practice of giving the name metalloid to such bodies as oxygen, chlorine or fluorine'. He instead divided the elements into ('basigenic') true metals, metalloids ('imperfect metals') and ('oxigenic') nonmetals. [31]
As late as 1888, classifying the elements into metals, metalloids, and nonmetals, rather than metals and metalloids, was still regarded as peculiar and potentially confusing. [32]
Beach, writing in 1911, explained it this way: [33]
In or around 1917, the Missouri Board of Pharmacy wrote [34] that:
We may notice that the distinction between metals and non-metals is not a sharply defined one—the one class shades off into the other. In the case of copper and carbon the balance of evidence is clear enough, but in some cases (e.g. arsenic) there is just about as much to be said on one side as on the other, and it is impossible to decided whether the element is a metal or non-metal. Such elements are often called metalloids.
Littler W 1935, Elementary Chemistry, G Bell and Sons, London, p. 337
During the 1920s the two meanings of the word metalloid appeared to be undergoing a transition in popularity. Writing in A Dictionary of Chemical Terms, Couch [35] defined 'metalloid' as an old, obsolescent term for 'nonmetal.' [n 2] In contrast, Webster's New International Dictionary noted that use of the term metalloid to refer to nonmetals was the norm. Its application to elements resembling the typical metals in some way only, such as arsenic, antimony and tellurium, was recorded merely on a 'sometimes' basis. [36]
Use of the term metalloid subsequently underwent a period of great flux up to 1940. Consensus as to its application to intermediate or borderline elements did not occur until the ensuing years, between 1940 and 1960. [17]
In 1947, Pauling included a reference to metalloids in his classic [37] and influential [38] textbook, General chemistry: An introduction to descriptive chemistry and modern chemical theory. He described them as 'elements with intermediate properties ... occupy[ing] a diagonal region [on the periodic table], which includes boron, silicon, germanium, arsenic, antimony, tellurium, and polonium.' [39]
In 1959 the International Union of Pure and Applied Chemistry (IUPAC) recommended that '[t]he word metalloid should not be used to denote nonmetals' [40] although it was still being used in this sense (around that time) by, for example, the French. [41]
In 1969 the classic [42] and authoritative [43] Hackh's Chemical Dictionary included entries for both 'metalloid' and 'semimetal'. The latter term was described as obsolete. [44]
In 1970 IUPAC recommended abandoning the term metalloid because of its continuing inconsistent use in different languages. They suggested using the terms metal, semimetal and nonmetal instead. [41] [45] Despite this recommendation, use of the term 'metalloid' increased dramatically. [17] Google Ngram Viewer showed a fourfold increase in the use of the word 'metalloid' (as compared to 'semimetal') in the American English corpus from 1972 to 1983. There was a sixfold increase in the British English corpus from 1976 to 1983. As at 2011, the difference in usage across the English corpus was around 4:1 in favour of 'metalloid'. [46]
The most recent IUPAC publications on chemical nomenclature (the " Red Book", 2005) [47] and terminology (the " Gold Book", 2006–) [48] do not include any recommendations as to the usage or non-usage of the terms metalloid or semimetal. [n 3]
Use of the term semimetal when discussing the periodic table, rather than metalloid, has recently been discouraged. This is because the former term 'has a well defined and quite distinct meaning' in band structure, [49] where a semimetal is an element or a compound where the highest occupied and lowest unoccupied bands overlap in terms of energy, but have different momenta. This often results in only a small number of charge carrierscharge, [50] [51] for instance the densities in the elemental semimetals carbon (as graphite, in the direction of its planes), arsenic, antimony and bismuth are 3×1018 cm−3, 2 ×1020 cm−3, 5×1019 cm−3 and 3×1017 cm−3 respectively. [52] In contrast, the room-temperature concentration of charge carriers in metals usually exceeds 1022 cm−3. [53]
References to 'metalloid' as being outdated have also been described as 'nonsense' noting that 'it accurately describes these weird in-between elements'. [54]
The origin and usage of the term metalloid is convoluted. Its origin lies in attempts, dating from antiquity, to describe metals and to distinguish between typical and less typical forms. It was first applied to metals that floated on water ( lithium, sodium and potassium), and then more popularly to nonmetals. Only recently, since the mid-20th century, has it been widely used to refer to elements with intermediate or borderline properties between metals and nonmetals.
Ancient conceptions of metals as solid, fusible and malleable substances can be found in Plato's Timaeus (c. 360 BCE) and Aristotle's Meteorology. [2] [3]
More sophisticated classification arrangements were proposed by Pseudo-Geber (in the Geber corpus, c. 1310), Paracelsus (De Natura Rerum libri nonem, 1525–6; and later works), Basil Valentine (Conclusiones, 1624), and Boerhaave (Elementa Chemiæ, 1733). They attempted to separate the more characteristic metals from substances having those characteristics to a lesser degree. Such substances included zinc, antimony, bismuth, stibnite, pyrite and galena. These were all then called semimetals or bastard metals. [4] [5] [6]
In 1735 Brandt proposed to make the presence or absence of malleability the principle of this classification. On that basis he separated mercury from the metals. The same view was adopted by Vogel (1755, Institutiones Chemiæ) and Buffon (1785, Histoire Naturelle des Minéraux). In the interim, Braun had observed the solidification of mercury by cold in 1759–60. This was confirmed by Hutchins and Cavendish in 1783. [7] The malleability of mercury then became known, and it was included amongst the metals. [4]
In 1789 Fourcroy [8] highlighted the weakness of this distinction between metals and semimetals. He said it was evident from the fact that
This idea of a semimetal, as a brittle (and thereby imperfect) [9] [10] metal, was gradually discarded after 1789 with the publication of Lavoisier's 'revolutionary' [11] Elementary Treatise on Chemistry. [12] [n 1]
In 1800, Pinkerton used the word metalloid, in its literal sense, to describe a mineral variety of pyroxene 'with metallic splendour.' [14]
In 1808, Erman and Simon suggested using the term metalloid to refer to the newly discovered elements sodium and potassium. [15] These elements were lighter than water and many chemists did not regard them as proper metals. Erman and Simon's proposal may have been made '[in] an attempt to revive this old distinction between metals and substances resembling metals'. [16] Their suggestion was ignored by the chemical community. [17]
In 1811,
Berzelius referred to nonmetallic elements as metalloids,
[17]
[18] in reference to their ability to form
oxyanions.
[19]
[20] A common oxyanion of
sulfur, for example, is the
sulfate ion SO2−
4. Many metals can do the same.
Chromium, for instance, can form the
chromate ion CrO2−
4. Berzelius' terminology was widely adopted
[17] although it was subsequently regarded by some commentators as counterintuitive,
[20] misapplied,
[12] incorrect
[21] or invalid.
[22] In 1825, in a revised German edition of his Textbook of Chemistry,
[23]
[24] Berzelius subdivided the metalloids into three classes. These were: constantly
gaseous 'gazolyta' (
hydrogen,
nitrogen,
oxygen); real metalloids (
sulfur,
phosphorus,
carbon,
boron,
silicon); and salt-forming '
halogenia' (
fluorine,
chlorine,
bromine,
iodine).
[25]
In 1844, Jackson gave the meaning of 'metalloid' as 'like metals, but wanting some of their properties.' [26] In 1845, in A dictionary of science, literature and art, Berzelius' classification of the elementary bodies was represented as: I. gazolytes; II. halogens; III. metalloids ('resemble the metals in certain aspects, but are in others widely different'); and IV. metals. [27]
In 1864, calling nonmetals 'metalloids' was still sanctioned 'by the best authorities' [28] even though this did not always seem appropriate. The greater propriety of applying the word metalloid to other elements, such as arsenic, had been considered. [28]
By as early as 1866 some authors were instead using the term nonmetal, rather than metalloid, to refer to nonmetallic elements. [29] In 1875, Kemshead observed that the elements had been subdivided into two classes—'non-metals or metalloids, and metals.' He added that '[t]he former term, although not so convenient, because a compound word, is more correct, and is now universally employed.' [30]
In 1876, Tilden protested against, 'the [still] too common though illogical practice of giving the name metalloid to such bodies as oxygen, chlorine or fluorine'. He instead divided the elements into ('basigenic') true metals, metalloids ('imperfect metals') and ('oxigenic') nonmetals. [31]
As late as 1888, classifying the elements into metals, metalloids, and nonmetals, rather than metals and metalloids, was still regarded as peculiar and potentially confusing. [32]
Beach, writing in 1911, explained it this way: [33]
In or around 1917, the Missouri Board of Pharmacy wrote [34] that:
We may notice that the distinction between metals and non-metals is not a sharply defined one—the one class shades off into the other. In the case of copper and carbon the balance of evidence is clear enough, but in some cases (e.g. arsenic) there is just about as much to be said on one side as on the other, and it is impossible to decided whether the element is a metal or non-metal. Such elements are often called metalloids.
Littler W 1935, Elementary Chemistry, G Bell and Sons, London, p. 337
During the 1920s the two meanings of the word metalloid appeared to be undergoing a transition in popularity. Writing in A Dictionary of Chemical Terms, Couch [35] defined 'metalloid' as an old, obsolescent term for 'nonmetal.' [n 2] In contrast, Webster's New International Dictionary noted that use of the term metalloid to refer to nonmetals was the norm. Its application to elements resembling the typical metals in some way only, such as arsenic, antimony and tellurium, was recorded merely on a 'sometimes' basis. [36]
Use of the term metalloid subsequently underwent a period of great flux up to 1940. Consensus as to its application to intermediate or borderline elements did not occur until the ensuing years, between 1940 and 1960. [17]
In 1947, Pauling included a reference to metalloids in his classic [37] and influential [38] textbook, General chemistry: An introduction to descriptive chemistry and modern chemical theory. He described them as 'elements with intermediate properties ... occupy[ing] a diagonal region [on the periodic table], which includes boron, silicon, germanium, arsenic, antimony, tellurium, and polonium.' [39]
In 1959 the International Union of Pure and Applied Chemistry (IUPAC) recommended that '[t]he word metalloid should not be used to denote nonmetals' [40] although it was still being used in this sense (around that time) by, for example, the French. [41]
In 1969 the classic [42] and authoritative [43] Hackh's Chemical Dictionary included entries for both 'metalloid' and 'semimetal'. The latter term was described as obsolete. [44]
In 1970 IUPAC recommended abandoning the term metalloid because of its continuing inconsistent use in different languages. They suggested using the terms metal, semimetal and nonmetal instead. [41] [45] Despite this recommendation, use of the term 'metalloid' increased dramatically. [17] Google Ngram Viewer showed a fourfold increase in the use of the word 'metalloid' (as compared to 'semimetal') in the American English corpus from 1972 to 1983. There was a sixfold increase in the British English corpus from 1976 to 1983. As at 2011, the difference in usage across the English corpus was around 4:1 in favour of 'metalloid'. [46]
The most recent IUPAC publications on chemical nomenclature (the " Red Book", 2005) [47] and terminology (the " Gold Book", 2006–) [48] do not include any recommendations as to the usage or non-usage of the terms metalloid or semimetal. [n 3]
Use of the term semimetal when discussing the periodic table, rather than metalloid, has recently been discouraged. This is because the former term 'has a well defined and quite distinct meaning' in band structure, [49] where a semimetal is an element or a compound where the highest occupied and lowest unoccupied bands overlap in terms of energy, but have different momenta. This often results in only a small number of charge carrierscharge, [50] [51] for instance the densities in the elemental semimetals carbon (as graphite, in the direction of its planes), arsenic, antimony and bismuth are 3×1018 cm−3, 2 ×1020 cm−3, 5×1019 cm−3 and 3×1017 cm−3 respectively. [52] In contrast, the room-temperature concentration of charge carriers in metals usually exceeds 1022 cm−3. [53]
References to 'metalloid' as being outdated have also been described as 'nonsense' noting that 'it accurately describes these weird in-between elements'. [54]