Nemo Link | |
---|---|
| |
Location | |
Country |
Belgium United Kingdom |
From | Zeebrugge, Belgium |
Passes through | North Sea |
To | Richborough, Kent, England |
Ownership information | |
Partners |
Elia System Operator National Grid plc |
Construction information | |
Manufacturer of conductor/cable | J-Power Systems Corporation |
Installer of conductor/cable | J-Power Systems Corporation, DeepOcean |
Manufacturer of substations | Siemens |
Installer of substations | Siemens |
Commissioned | 31 January 2019 |
Technical information | |
Type | submarine cable |
Type of current | HVDC |
Total length | 140 km (87 mi) |
Power rating | 1,000 MW |
DC voltage | 400 kV |
Nemo Link is a 1,000 Mega Watt HVDC submarine power cable between Richborough Energy Park in Kent, the United Kingdom and Zeebrugge, Belgium. [1] The project is a joint venture between British National Grid and Belgian Elia. [1] The 400 kV [1] [2] electrical interconnector is the first between the two countries, with an annual transmission capacity of 8.76 TWh. The link has been fully operational since 31 January 2019, [1] [3] and has transported 29 TWh during its first 5 years; 24.75 TWh to the UK and 4.25 to Belgium with an availability above 99%. [4]
In 2015, contracts totalling €500 million were awarded to Siemens for the construction of the two onshore HVDC converter stations and to J-Power Systems Corporation for the cable system. [1] [5] The contract for the laying of the actual cable was awarded to DeepOcean who completed the work in 2017 and 2018. [6] [7]
The total cable length is 140 km (87 miles) of which 130 kilometres (81 mi) is under water, buried at a depth of up to 60 metres (200 ft). [2] The offshore section runs from Pegwell Bay on the UK side to Zeebrugge beach in Belgium. The onshore cable in Belgium is nearly 9 km (5.6 miles) long and connects the landing point of the submarine cable in Zeebrugge beach to the converter station in Herdersbrug. In the United Kingdom there is 2 km (1.2 miles) of land cable from Pegwell Bay to the Richborough converter station.
Nemo Link | |
---|---|
| |
Location | |
Country |
Belgium United Kingdom |
From | Zeebrugge, Belgium |
Passes through | North Sea |
To | Richborough, Kent, England |
Ownership information | |
Partners |
Elia System Operator National Grid plc |
Construction information | |
Manufacturer of conductor/cable | J-Power Systems Corporation |
Installer of conductor/cable | J-Power Systems Corporation, DeepOcean |
Manufacturer of substations | Siemens |
Installer of substations | Siemens |
Commissioned | 31 January 2019 |
Technical information | |
Type | submarine cable |
Type of current | HVDC |
Total length | 140 km (87 mi) |
Power rating | 1,000 MW |
DC voltage | 400 kV |
Nemo Link is a 1,000 Mega Watt HVDC submarine power cable between Richborough Energy Park in Kent, the United Kingdom and Zeebrugge, Belgium. [1] The project is a joint venture between British National Grid and Belgian Elia. [1] The 400 kV [1] [2] electrical interconnector is the first between the two countries, with an annual transmission capacity of 8.76 TWh. The link has been fully operational since 31 January 2019, [1] [3] and has transported 29 TWh during its first 5 years; 24.75 TWh to the UK and 4.25 to Belgium with an availability above 99%. [4]
In 2015, contracts totalling €500 million were awarded to Siemens for the construction of the two onshore HVDC converter stations and to J-Power Systems Corporation for the cable system. [1] [5] The contract for the laying of the actual cable was awarded to DeepOcean who completed the work in 2017 and 2018. [6] [7]
The total cable length is 140 km (87 miles) of which 130 kilometres (81 mi) is under water, buried at a depth of up to 60 metres (200 ft). [2] The offshore section runs from Pegwell Bay on the UK side to Zeebrugge beach in Belgium. The onshore cable in Belgium is nearly 9 km (5.6 miles) long and connects the landing point of the submarine cable in Zeebrugge beach to the converter station in Herdersbrug. In the United Kingdom there is 2 km (1.2 miles) of land cable from Pegwell Bay to the Richborough converter station.