The standards are protected by
copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and
IEC's Joint Technical Committee 1 (
JTC 1) have been made freely and publicly available.[2]
ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 8229:1991 Operations and baths relating to dry-cleaning machines β Vocabulary
ISO 8277:2013 Ships and marine technology β Pipework and machinery β Information transfer
ISO 8297:1994 Acoustics β Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment β Engineering method
ISO 8316:1987 Measurement of liquid flow in closed conduits β Method by collection of the liquid in a volumetric tank
ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
ISO 8319 Orthopaedic instruments β Drive connections
ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
ISO/IEC 8326:1996 Information technology β Open Systems Interconnection β Session service definition
ISO/IEC 8327 Information technology β Open Systems Interconnection β Connection-oriented Session protocol
ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes β V-shaped broad-crested weirs
ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
ISO/IEC 8348:2002 Information technology β Open Systems Interconnection β Network service definition
ISO 8362 Injection containers and accessories
ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
ISO 8362-2:2015 Part 2: Closures for injection vials
ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
ISO/TR 8363:1997 Measurement of liquid flow in open channels β General guidelines for selection of method [Withdrawn: replaced by ISO 18365]
ISO 8368:1999 Hydrometric determinations β Flow measurements in open channels using structures β Guidelines for selection of structure
ISO 8373:2012 Manipulating industrial robots β Vocabulary
ISO 8378 Information processing β Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
ISO 8378-2:1986 Part 2: Track format A
ISO 8378-3:1986 Part 3: Track format B
ISO 8384:2000 Ships and marine technology β Dredgers β Vocabulary
ISO 8388:1998 Knitted fabrics β Types β Vocabulary
ISO 8421 Fire protection - Vocabulary
ISO 8421-1:1987 Part 1: General terms and phenomena of fire
ISO 8421-2:1987 Part 2: Structural fire protection
ISO 8421-6:1987 Part 6: Evacuation and means of escape
ISO 8421-7:1987 Part 7: Explosion detection and suppression means
ISO 8422:2006 Sequential sampling plans for inspection by attributes
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 8429:1986 Optics and optical instruments β Ophthalmology β Graduated dial scale
ISO 8439:1990 Forms design - Basic layout
ISO 8440:1986 Location of codes in trade documents
ISO/IEC 8441 Information technology β High density digital recording (HDDR)
ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
ISO 8462 Information processing β Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
ISO 8462-2:1986 Part 2: Streaming mode
ISO/IEC 8473 Information technology β Protocol for providing the connectionless-mode network service
ISO/IEC 8473-1:1998 Protocol specification
ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
ISO/IEC 8480:1995 Information technology β Telecommunications and information exchange between systems β DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
ISO/IEC 8481:1996 Information technology β Telecommunications and information exchange between systems β DTE to DTE direct connections
ISO/IEC 8482:1993 Information technology β Telecommunications and information exchange between systems β Twisted pair multipoint interconnections
ISO/IEC 8484:2014 Information technology β Magnetic stripes on savingsbooks
ISO 8498:1990 Woven fabrics β Description of defects β Vocabulary
ISO 8499:2003 Knitted fabrics β Description of defects β Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related products β Visual assessment of surface cleanliness
ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis - The Bresle method
ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
ISO 8504-1:2000 Part 1: General principles
ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
ISO 8512 Surface plates
ISO 8512-1:1990 Part 1: Cast iron
ISO 8512-2:1990 Part 2: Granite
ISO/TR 8517:1988 Rubber- or plastics-covered rollers β Glossary
ISO 8525:2008 Airborne noise emitted by machine tools β Operating conditions for metal-cutting machines
ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
ISO 8528-1:2005 Part 1: Application, ratings and performance
ISO 8528-2:2005 Part 2: Engines
ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
ISO 8528-4:2005 Part 4: Controlgear and switchgear
ISO 8528-5:2013 Part 5: Generating sets
ISO 8528-6:2005 Part 6: Test methods
ISO 8528-7:2017 Part 7: Technical declarations for specification and design
ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
ISO 8528-12:1997 Part 12: Emergency power supply to safety services
ISO 8528-13:2016 Part 13: Safety
ISO 8529 Reference neutron radiations
ISO 8529-1:2001 Part 1: Characteristics and methods of production
ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
ISO 8532:1995 Securities β Format for transmission of certificate numbers
ISO 8536 Infusion equipment for medical use
ISO 8536-1:2011 Part 1: Infusion glass bottles
ISO 8536-2:2010 Part 2: Closures for infusion bottles
ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
ISO 8536-12:2007 Part 12: Check valves
ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
ISO 8540:1993 Open front mechanical power presses - Vocabulary
ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
ISO 8549 Prosthetics and orthotics - Vocabulary
ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
ISO 8549-3:1989 Part 3: Terms relating to external orthoses
ISO 8549-4:2014 Part 4: Terms relating to limb amputation
ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
ISO/TR 8550-1:2007 Part 1: Acceptance sampling
ISO/TR 8550-2:2007 Part 2: Sampling by attributes
ISO/TR 8550-3:2007 Part 3: Sampling by variables
ISO 8551:2003 Prosthetics and orthotics β Functional deficiencies β Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
ISO 8552:2004 Milk β Estimation of psychrotrophic microorganisms β Colony-count technique at 21 degrees C (Rapid method)
ISO 8553:2004 Milk β Enumeration of microorganisms β Plate-loop technique at 30 degrees C
ISO 8559:1989 Garment construction and anthropometric surveys β Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
ISO 8559 Size designation of clothes
ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
ISO 8560:1986 Technical drawings β Construction drawings β Representation of modular sizes, lines and grids
ISO 8568:2007 Mechanical shock β Testing machines β Characteristics and performance
ISO 8615:1991 Implants for surgery β Fixation devices for use in the ends of the femur in adults
ISO 8624:2011 Ophthalmic optics β Spectacle frames β Measuring system and terminology
ISO 8625 Aerospace β Fluid systems β Vocabulary
ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
ISO 8626:1989 Servo-hydraulic test equipment for generating vibration β Method of describing characteristics
ISO 8630 Information processing β Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
ISO 8630-2:1987 Part 2: Track format A for 77 tracks
ISO 8630-3:1987 Part 3: Track format B for 80 tracks
ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
ISO/IEC 8632 Information technology β Computer graphics β
Metafile for the storage and transfer of picture description information
ISO/IEC 8632-1:1999 Part 1: Functional specification
ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
ISO/IEC 8632-3:1999 Part 3: Binary encoding
ISO/IEC 8632-4:1999 Part 4: Clear text encoding
ISO 8637:2010 Cardiovascular implants and extracorporeal systems β Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO 8638:2010 Cardiovascular implants and extracorporeal systems β Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
ISO 8640 Textile machinery and accessories β Flat warp knitting machines[Note 3]
ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
ISO 8648:1988 Information processing systems β Open Systems Interconnection β Internal organization of the Network Layer
ISO/IEC 8650 Information technology β Open Systems Interconnection β Protocol specification for the Association Control Service Element
ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
ISO 8805 Information processing systems β Computer graphics β
Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO 8807:1989 Information processing systems β Open Systems Interconnection β
LOTOS β A formal description technique based on the temporal ordering of observational behaviour
ISO 8811:2000 Earth-moving machinery β Rollers and compactors β Terminology and commercial specifications
ISO 8812:2016 Earth-moving machinery β Backhoe loaders β Terminology and commercial specifications
ISO 8815:1994 Aircraft β Electrical cables and cable harnesses β Vocabulary
ISO/IEC 8822:1994 Information technology β Open Systems Interconnection β Presentation service definition
ISO/IEC 8823 Information technology β Open Systems Interconnection β Connection-oriented presentation protocol
ISO 8860 Information processing β Data interchange on
90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
ISO 8860-2:1987 Part 2: Track format
ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
ISO 8871-2:2003 Part 2: Identification and characterization
ISO 8871-3:2003 Part 3: Determination of released-particle count
ISO 8871-4:2006 Part 4: Biological requirements and test methods
ISO 8871-5:2016 Part 5: Functional requirements and testing
ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles β General requirements and test methods
ISO/IEC 8877:1992 Information technology β Telecommunications and information exchange between systems β Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
ISO/IEC 8878:1992 Information technology β Telecommunications and information exchange between systems β Use of X.25 to provide the OSI Connection-mode Network Service
ISO/IEC 8880 Information technology β Telecommunications and information exchange between systems β Protocol combinations to provide and support the OSI Network Service
ISO/IEC 8880-1:1990 Part 1: General principles [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8880-2:1992 Part 2: Provision and support of the connection-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8880-3:1990 Part 3: Provision and support of the connectionless-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8881:1989 Information processing systems β Data communications β Use of the X.25 packet level protocol in local area networks
ISO/IEC 8882 Information technology β Telecommunications and information exchange between systems β X.25 DTE conformance testing
ISO/IEC 8882-1:1996 Part 1: General principles
ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
ISO 8884:1989 Information processing β Text and office systems β Keyboards for multiple Latin-alphabet languages β Layout and operation [Withdrawn: replaced with ISO 9995-(1,7)]
ISO 8885:1987 Information processing systems β Data communication β High-level data link control procedures β General purpose XID frame information field content and format [Withdrawn without replacement]
ISO/IEC 8886:1996 Information technology β Open Systems Interconnection β Data link service definition
ISO 8887 Technical product documentation β Design for manufacturing, assembling, disassembling and end-of-life processing
ISO 8887-1:2017 Part 1: General concepts and requirements
ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 % [Withdrawn: replaced with ISO 22674]
ISO 8909 Forage harvesters
ISO 8909-1:1994 Part 1: Vocabulary
ISO 8910:1993 Machinery and equipment for working the soil β Mouldboard plough working elements β Vocabulary
ISO 8927:1991 Earth-moving machinery β Machine availability β Vocabulary
ISO 8930:1987 General principles on reliability for structures β List of equivalent terms
ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
ISO 8954 Ferroalloys - Vocabulary
ISO 8954-1:1990 Part 1: Materials
ISO 8954-2:1990 Part 2: Sampling and sample preparation
ISO 8954-3:1990 Part 3: Sieve analysis
ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
ISO 8965:2013 Logging industry β Technology β Terms and definitions
ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
ISO 8980 Ophthalmic optics β Uncut finished spectacle lenses
ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols
ISO 9000 β ISO 9999
ISO 9000:2015 Quality management systems β Fundamentals and vocabulary
ISO 9001:2015 Quality management systems β Requirements
ISO/TS 9002:2016 Quality management systems β Guidelines for the application of ISO 9001:2015
ISO 9004:2018 Managing for the sustained success of an organization β A quality management approach
ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
ISO 9019:1995 Securities β Numbering of certificates
ISO 9022 Optics and optical instruments - Environmental test methods
ISO 9022-1:2016 Definitions, extent of testing
ISO 9022-2:2015 Cold, heat and humidity
ISO 9022-3:2015 Mechanical stress
ISO 9022-4:2014 Salt mist
ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
ISO 9022-6:2015 Dust
ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
ISO/IEC 9040:1997 Information technology β Open Systems Interconnection β Virtual Terminal Basic Class Service
ISO/IEC 9041 Information technology β Open Systems Interconnection β Virtual Terminal Basic Class Protocol
ISO/IEC 9041-1:1997 Part 1: Specification
ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
ISO 9045:1990 Industrial screens and screening β Vocabulary
ISO 9050 Glass in building β Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
ISO/IEC 9066 Information technology β Open Systems Interconnection β Reliable Transfer[Note 4]
ISO/IEC 9066-1:1989 Part 1: Model and service definition
ISO/IEC 9066-2:1989 Part 2: Protocol specification
ISO 9141-2
CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and
OBD II scan tool
ISO 9144:1991 Securities β Optical character recognition line β Position and structure
ISO 9160:1988 Information processing - Data encipherment -
Physical layer interoperability requirements
ISO 9170 Terminal units for medical gas pipeline systems
ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
ISO/IEC 9171-2:1990 Part 2: Recording format
ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
ISO 9177 Mechanical pencils for technical drawings[Note 4]
ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
ISO 9177-2:1989 Part 2: Black leads β Classification and dimensions
ISO 9177-3:1994 Part 3: Black leads β Bending strengths of HB leads
ISO 9180:1988 Black leads for wood-cased pencils β Classification and diameters
ISO 9186 Graphical symbols - Test methods
ISO 9186-1:2014 Part 1: Method for testing comprehensibility
ISO 9186-2:2008 Part 2: Method for testing perceptual quality
ISO 9186-3:2014 Part 3: Method for testing symbol referent association
ISO 9187 Injection equipment for medical use
ISO 9187-1:2010 Part 1: Ampoules for injectables
ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
ISO 9195:1992 Liquid flow measurement in open channels β Sampling and analysis of gravel-bed material
ISO 9196:1992 Liquid flow measurement in open channels β Flow measurements under ice conditions
ISO 9211 Optics and photonics - Optical coatings
ISO 9211-1:2010 Part 1: Definitions
ISO/TR 9212:2015 Hydrometry β Methods of measurement of bedload discharge
ISO 9222 Technical drawings β Seals for dynamic application
ISO 9222-1:1989 Part 1: General simplified representation
ISO 9222-2:1989 Part 2: Detailed simplified representation
ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO/IEC 9314-4:1999 Part 4:
Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
ISO 9334:2012 Optics and photonics -
Optical transfer function - Definitions and mathematical relationships
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 9342 Optics and optical instruments β Test lenses for calibration of focimeters
ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
ISO 9346:2007 Hygrothermal performance of buildings and building materials β Physical quantities for mass transfer β Vocabulary
ISO 9360 Anaesthetic and respiratory equipment β Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
ISO 9368 Measurement of liquid flow in closed conduits by the weighing method β Procedures for checking installations
ISO 9368-1:1990 Part 1: Static weighing systems
ISO 9394:2012 Ophthalmic optics β Contact lenses and contact lens care products β Determination of biocompatibility by ocular study with rabbit eyes
ISO 9407 Shoe sizes β Mondopoint system of sizing and marking
ISO 9431:1990 Construction drawings β Spaces for drawing and for text, and title blocks on drawing sheets
ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
ISO 9493:2010 Geometrical product specifications (GPS) β Dimensional measuring equipment: Dial test indicators (lever type) β Design and metrological characteristics
ISO/IEC 9496:2003
CHILL - The
ITU-T programming language
ISO 9506 Industrial automation systems - Manufacturing Message Specification
ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
ISO/IEC 9541 Information technology β Font information interchange
ISO/IEC 9541-1:2012 Part 1: Architecture
ISO/IEC 9541-2:2012 Part 2: Interchange Format
ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
ISO 9542:1988 Information processing systems β Telecommunications and information exchange between systems β End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
ISO 9543:1989 Information processing systems β Information exchange between systems β Synchronous transmission signal quality at DTE/DCE interfaces
ISO/IEC 9545:1994 Information technology β Open Systems Interconnection β Application Layer structure
ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
ISO/IEC 9548 Information technology β Open Systems Interconnection β Connectionless Session protocol
ISO 9568:1993 Cinematography β Background acoustic noise levels in theatres, review rooms and dubbing rooms
ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
ISO/IEC 9574:1992 Information technology β Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
ISO/IEC TR 9575:1995 Information technology β Telecommunications and information exchange between systems β OSI Routeing Framework
ISO/IEC 9576 Information technology β Open Systems Interconnection β Connectionless Presentation protocol
ISO 9611:1996 Acoustics β Characterization of sources of structure-borne sound with respect to sound radiation from connected structures β Measurement of velocity at the contact points of machinery when resiliently mounted
ISO 9613 Acoustics β Attenuation of sound during propagation outdoors
ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
ISO 9613-2:1996 Part 2: General method of calculation
ISO 9614 Acoustics β Determination of sound power levels of noise sources using sound intensity
ISO 9614-1:1993 Part 1: Measurement at discrete points
ISO 9614-2:1996 Part 2: Measurement by scanning
ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices β Requirements and test methods
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
ISO/IEC 9636-2:1991 Part 2: Control
ISO/IEC 9636-3:1991 Part 3: Output
ISO/IEC 9636-4:1991 Part 4: Segments
ISO/IEC 9636-5:1991 Part 5: Input and echoing
ISO/IEC 9636-6:1991 Part 6: Raster
ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) β Data stream binding
ISO/IEC 9637-1:1994 Part 1: Character encoding
ISO/IEC 9637-2:1992 Part 2: Binary encoding
ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
ISO/IEC 9638-3:1994 Part 3: Ada
ISO 9645:1990 Acoustics β Measurement of noise emitted by two-wheeled mopeds in motion β Engineering method
ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (
TTCN)
ISO/IEC 9646-4:1994 Part 4: Test realization
ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
ISO 9660:1988 Information processing β Volume and file structure of
CD-ROM for information interchange
ISO/IEC 9661:1994 Information technology β Data interchange on 12,7 mm wide magnetic tape cartridges β 18 tracks, 1 491 data bytes per millimetre
ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
ISO 9668:1990 Pulps β Determination of magnesium content β Flame atomic absorption spectrometric method [Withdrawn: replaced with ISO 12830]
ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
ISO 9688:1990 Mechanical vibration and shock β Analytical methods of assessing shock resistance of mechanical systems β Information exchange between suppliers and users of analyses
ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
ISO 9706:1994 Information and documentation β Paper for documents β Requirements for permanence
ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
ISO 9713:2002 Neurosurgical implants β Self-closing intracranial aneurysm clips
ISO 9714 Orthopaedic drilling instruments
ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) β Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 4]
ISO 9735-1:2002 Part 1: Syntax rules common to all parts
ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type β CONTRL)
ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type β AUTACK)
ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
ISO 9735-8:2002 Part 8: Associated data in EDI
ISO 9735-9:2002 Part 9: Security key and certificate management message (message type β KEYMAN)
ISO 9735-10:2014 Part 10: Syntax service directories
ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
ISO/IEC 9798 Information technology β Security techniques β Entity authentication
ISO/IEC 9798-1:2010 Part 1: General
ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
ISO 9801:2009 Ophthalmic instruments β Trial case lenses
ISO 9802:1996 Raw optical glass β Vocabulary
ISO/IEC 9804:1998 Information technology β Open Systems Interconnection β Service definition for the Commitment, Concurrency and Recovery service element
ISO/IEC 9805 Information technology β Open Systems Interconnection β Protocol for the Commitment, Concurrency and Recovery service element
ISO/IEC/IEEE 9945:2009 Information technology β Portable Operating System Interface (
POSIXΒ) Base Specifications, Issue 7
ISO 9947:2005 Textile machinery and accessories β Two-for-one twisters β Vocabulary
ISO 9949 Urine absorbing aids - Vocabulary
ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
ISO 9949-2:1993 Part 2: Products
ISO 9949-3:1993 Part 3: Identification of product types
ISO 9951:1993 Measurement of gas flow in closed conduits β Turbine meters
ISO 9957 Fluid draughting media
ISO 9957-1:1992 Part 1: Water-based India ink β Requirements and test conditions
ISO 9957-2:1995 Part 2: Water-based non-India ink β Requirements and test conditions
ISO 9957-3:1997 Part 3: Water-based coloured draughting inks β Requirements and test conditions
ISO 9958 Draughting media for technical drawings β Draughting film with polyester base
ISO 9958-1:1992 Part 1: Requirements and marking
ISO 9958-2:1992 Part 2: Determination of properties
ISO 9959 Numerically controlled draughting machines β Drawing test for the evaluation of performance
ISO 9959-1:1992 Part 1: Vector plotters
ISO 9960 Draughting instruments with or without graduation
ISO 9960-1:1992 Part 1: Draughting scale rules
ISO 9961:1992 Draughting media for technical drawings β Natural tracing paper
ISO 9962 Manually operated draughting machines
ISO 9962-1:1992 Part 1: Definitions, classification and designation
ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
The standards are protected by
copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and
IEC's Joint Technical Committee 1 (
JTC 1) have been made freely and publicly available.[2]
ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 8229:1991 Operations and baths relating to dry-cleaning machines β Vocabulary
ISO 8277:2013 Ships and marine technology β Pipework and machinery β Information transfer
ISO 8297:1994 Acoustics β Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment β Engineering method
ISO 8316:1987 Measurement of liquid flow in closed conduits β Method by collection of the liquid in a volumetric tank
ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
ISO 8319 Orthopaedic instruments β Drive connections
ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
ISO/IEC 8326:1996 Information technology β Open Systems Interconnection β Session service definition
ISO/IEC 8327 Information technology β Open Systems Interconnection β Connection-oriented Session protocol
ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes β V-shaped broad-crested weirs
ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
ISO/IEC 8348:2002 Information technology β Open Systems Interconnection β Network service definition
ISO 8362 Injection containers and accessories
ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
ISO 8362-2:2015 Part 2: Closures for injection vials
ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
ISO/TR 8363:1997 Measurement of liquid flow in open channels β General guidelines for selection of method [Withdrawn: replaced by ISO 18365]
ISO 8368:1999 Hydrometric determinations β Flow measurements in open channels using structures β Guidelines for selection of structure
ISO 8373:2012 Manipulating industrial robots β Vocabulary
ISO 8378 Information processing β Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
ISO 8378-2:1986 Part 2: Track format A
ISO 8378-3:1986 Part 3: Track format B
ISO 8384:2000 Ships and marine technology β Dredgers β Vocabulary
ISO 8388:1998 Knitted fabrics β Types β Vocabulary
ISO 8421 Fire protection - Vocabulary
ISO 8421-1:1987 Part 1: General terms and phenomena of fire
ISO 8421-2:1987 Part 2: Structural fire protection
ISO 8421-6:1987 Part 6: Evacuation and means of escape
ISO 8421-7:1987 Part 7: Explosion detection and suppression means
ISO 8422:2006 Sequential sampling plans for inspection by attributes
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 8429:1986 Optics and optical instruments β Ophthalmology β Graduated dial scale
ISO 8439:1990 Forms design - Basic layout
ISO 8440:1986 Location of codes in trade documents
ISO/IEC 8441 Information technology β High density digital recording (HDDR)
ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
ISO 8462 Information processing β Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
ISO 8462-2:1986 Part 2: Streaming mode
ISO/IEC 8473 Information technology β Protocol for providing the connectionless-mode network service
ISO/IEC 8473-1:1998 Protocol specification
ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
ISO/IEC 8480:1995 Information technology β Telecommunications and information exchange between systems β DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
ISO/IEC 8481:1996 Information technology β Telecommunications and information exchange between systems β DTE to DTE direct connections
ISO/IEC 8482:1993 Information technology β Telecommunications and information exchange between systems β Twisted pair multipoint interconnections
ISO/IEC 8484:2014 Information technology β Magnetic stripes on savingsbooks
ISO 8498:1990 Woven fabrics β Description of defects β Vocabulary
ISO 8499:2003 Knitted fabrics β Description of defects β Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related products β Visual assessment of surface cleanliness
ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis - The Bresle method
ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
ISO 8504-1:2000 Part 1: General principles
ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
ISO 8512 Surface plates
ISO 8512-1:1990 Part 1: Cast iron
ISO 8512-2:1990 Part 2: Granite
ISO/TR 8517:1988 Rubber- or plastics-covered rollers β Glossary
ISO 8525:2008 Airborne noise emitted by machine tools β Operating conditions for metal-cutting machines
ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
ISO 8528-1:2005 Part 1: Application, ratings and performance
ISO 8528-2:2005 Part 2: Engines
ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
ISO 8528-4:2005 Part 4: Controlgear and switchgear
ISO 8528-5:2013 Part 5: Generating sets
ISO 8528-6:2005 Part 6: Test methods
ISO 8528-7:2017 Part 7: Technical declarations for specification and design
ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
ISO 8528-12:1997 Part 12: Emergency power supply to safety services
ISO 8528-13:2016 Part 13: Safety
ISO 8529 Reference neutron radiations
ISO 8529-1:2001 Part 1: Characteristics and methods of production
ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
ISO 8532:1995 Securities β Format for transmission of certificate numbers
ISO 8536 Infusion equipment for medical use
ISO 8536-1:2011 Part 1: Infusion glass bottles
ISO 8536-2:2010 Part 2: Closures for infusion bottles
ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
ISO 8536-12:2007 Part 12: Check valves
ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
ISO 8540:1993 Open front mechanical power presses - Vocabulary
ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
ISO 8549 Prosthetics and orthotics - Vocabulary
ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
ISO 8549-3:1989 Part 3: Terms relating to external orthoses
ISO 8549-4:2014 Part 4: Terms relating to limb amputation
ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
ISO/TR 8550-1:2007 Part 1: Acceptance sampling
ISO/TR 8550-2:2007 Part 2: Sampling by attributes
ISO/TR 8550-3:2007 Part 3: Sampling by variables
ISO 8551:2003 Prosthetics and orthotics β Functional deficiencies β Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
ISO 8552:2004 Milk β Estimation of psychrotrophic microorganisms β Colony-count technique at 21 degrees C (Rapid method)
ISO 8553:2004 Milk β Enumeration of microorganisms β Plate-loop technique at 30 degrees C
ISO 8559:1989 Garment construction and anthropometric surveys β Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
ISO 8559 Size designation of clothes
ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
ISO 8560:1986 Technical drawings β Construction drawings β Representation of modular sizes, lines and grids
ISO 8568:2007 Mechanical shock β Testing machines β Characteristics and performance
ISO 8615:1991 Implants for surgery β Fixation devices for use in the ends of the femur in adults
ISO 8624:2011 Ophthalmic optics β Spectacle frames β Measuring system and terminology
ISO 8625 Aerospace β Fluid systems β Vocabulary
ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
ISO 8626:1989 Servo-hydraulic test equipment for generating vibration β Method of describing characteristics
ISO 8630 Information processing β Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
ISO 8630-2:1987 Part 2: Track format A for 77 tracks
ISO 8630-3:1987 Part 3: Track format B for 80 tracks
ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
ISO/IEC 8632 Information technology β Computer graphics β
Metafile for the storage and transfer of picture description information
ISO/IEC 8632-1:1999 Part 1: Functional specification
ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
ISO/IEC 8632-3:1999 Part 3: Binary encoding
ISO/IEC 8632-4:1999 Part 4: Clear text encoding
ISO 8637:2010 Cardiovascular implants and extracorporeal systems β Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO 8638:2010 Cardiovascular implants and extracorporeal systems β Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
ISO 8640 Textile machinery and accessories β Flat warp knitting machines[Note 3]
ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
ISO 8648:1988 Information processing systems β Open Systems Interconnection β Internal organization of the Network Layer
ISO/IEC 8650 Information technology β Open Systems Interconnection β Protocol specification for the Association Control Service Element
ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
ISO 8805 Information processing systems β Computer graphics β
Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO 8807:1989 Information processing systems β Open Systems Interconnection β
LOTOS β A formal description technique based on the temporal ordering of observational behaviour
ISO 8811:2000 Earth-moving machinery β Rollers and compactors β Terminology and commercial specifications
ISO 8812:2016 Earth-moving machinery β Backhoe loaders β Terminology and commercial specifications
ISO 8815:1994 Aircraft β Electrical cables and cable harnesses β Vocabulary
ISO/IEC 8822:1994 Information technology β Open Systems Interconnection β Presentation service definition
ISO/IEC 8823 Information technology β Open Systems Interconnection β Connection-oriented presentation protocol
ISO 8860 Information processing β Data interchange on
90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
ISO 8860-2:1987 Part 2: Track format
ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
ISO 8871-2:2003 Part 2: Identification and characterization
ISO 8871-3:2003 Part 3: Determination of released-particle count
ISO 8871-4:2006 Part 4: Biological requirements and test methods
ISO 8871-5:2016 Part 5: Functional requirements and testing
ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles β General requirements and test methods
ISO/IEC 8877:1992 Information technology β Telecommunications and information exchange between systems β Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
ISO/IEC 8878:1992 Information technology β Telecommunications and information exchange between systems β Use of X.25 to provide the OSI Connection-mode Network Service
ISO/IEC 8880 Information technology β Telecommunications and information exchange between systems β Protocol combinations to provide and support the OSI Network Service
ISO/IEC 8880-1:1990 Part 1: General principles [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8880-2:1992 Part 2: Provision and support of the connection-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8880-3:1990 Part 3: Provision and support of the connectionless-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
ISO/IEC 8881:1989 Information processing systems β Data communications β Use of the X.25 packet level protocol in local area networks
ISO/IEC 8882 Information technology β Telecommunications and information exchange between systems β X.25 DTE conformance testing
ISO/IEC 8882-1:1996 Part 1: General principles
ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
ISO 8884:1989 Information processing β Text and office systems β Keyboards for multiple Latin-alphabet languages β Layout and operation [Withdrawn: replaced with ISO 9995-(1,7)]
ISO 8885:1987 Information processing systems β Data communication β High-level data link control procedures β General purpose XID frame information field content and format [Withdrawn without replacement]
ISO/IEC 8886:1996 Information technology β Open Systems Interconnection β Data link service definition
ISO 8887 Technical product documentation β Design for manufacturing, assembling, disassembling and end-of-life processing
ISO 8887-1:2017 Part 1: General concepts and requirements
ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 % [Withdrawn: replaced with ISO 22674]
ISO 8909 Forage harvesters
ISO 8909-1:1994 Part 1: Vocabulary
ISO 8910:1993 Machinery and equipment for working the soil β Mouldboard plough working elements β Vocabulary
ISO 8927:1991 Earth-moving machinery β Machine availability β Vocabulary
ISO 8930:1987 General principles on reliability for structures β List of equivalent terms
ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
ISO 8954 Ferroalloys - Vocabulary
ISO 8954-1:1990 Part 1: Materials
ISO 8954-2:1990 Part 2: Sampling and sample preparation
ISO 8954-3:1990 Part 3: Sieve analysis
ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
ISO 8965:2013 Logging industry β Technology β Terms and definitions
ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
ISO 8980 Ophthalmic optics β Uncut finished spectacle lenses
ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols
ISO 9000 β ISO 9999
ISO 9000:2015 Quality management systems β Fundamentals and vocabulary
ISO 9001:2015 Quality management systems β Requirements
ISO/TS 9002:2016 Quality management systems β Guidelines for the application of ISO 9001:2015
ISO 9004:2018 Managing for the sustained success of an organization β A quality management approach
ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
ISO 9019:1995 Securities β Numbering of certificates
ISO 9022 Optics and optical instruments - Environmental test methods
ISO 9022-1:2016 Definitions, extent of testing
ISO 9022-2:2015 Cold, heat and humidity
ISO 9022-3:2015 Mechanical stress
ISO 9022-4:2014 Salt mist
ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
ISO 9022-6:2015 Dust
ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
ISO/IEC 9040:1997 Information technology β Open Systems Interconnection β Virtual Terminal Basic Class Service
ISO/IEC 9041 Information technology β Open Systems Interconnection β Virtual Terminal Basic Class Protocol
ISO/IEC 9041-1:1997 Part 1: Specification
ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
ISO 9045:1990 Industrial screens and screening β Vocabulary
ISO 9050 Glass in building β Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
ISO/IEC 9066 Information technology β Open Systems Interconnection β Reliable Transfer[Note 4]
ISO/IEC 9066-1:1989 Part 1: Model and service definition
ISO/IEC 9066-2:1989 Part 2: Protocol specification
ISO 9141-2
CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and
OBD II scan tool
ISO 9144:1991 Securities β Optical character recognition line β Position and structure
ISO 9160:1988 Information processing - Data encipherment -
Physical layer interoperability requirements
ISO 9170 Terminal units for medical gas pipeline systems
ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
ISO/IEC 9171-2:1990 Part 2: Recording format
ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
ISO 9177 Mechanical pencils for technical drawings[Note 4]
ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
ISO 9177-2:1989 Part 2: Black leads β Classification and dimensions
ISO 9177-3:1994 Part 3: Black leads β Bending strengths of HB leads
ISO 9180:1988 Black leads for wood-cased pencils β Classification and diameters
ISO 9186 Graphical symbols - Test methods
ISO 9186-1:2014 Part 1: Method for testing comprehensibility
ISO 9186-2:2008 Part 2: Method for testing perceptual quality
ISO 9186-3:2014 Part 3: Method for testing symbol referent association
ISO 9187 Injection equipment for medical use
ISO 9187-1:2010 Part 1: Ampoules for injectables
ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
ISO 9195:1992 Liquid flow measurement in open channels β Sampling and analysis of gravel-bed material
ISO 9196:1992 Liquid flow measurement in open channels β Flow measurements under ice conditions
ISO 9211 Optics and photonics - Optical coatings
ISO 9211-1:2010 Part 1: Definitions
ISO/TR 9212:2015 Hydrometry β Methods of measurement of bedload discharge
ISO 9222 Technical drawings β Seals for dynamic application
ISO 9222-1:1989 Part 1: General simplified representation
ISO 9222-2:1989 Part 2: Detailed simplified representation
ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO/IEC 9314-4:1999 Part 4:
Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
ISO 9334:2012 Optics and photonics -
Optical transfer function - Definitions and mathematical relationships
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 9342 Optics and optical instruments β Test lenses for calibration of focimeters
ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
ISO 9346:2007 Hygrothermal performance of buildings and building materials β Physical quantities for mass transfer β Vocabulary
ISO 9360 Anaesthetic and respiratory equipment β Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
ISO 9368 Measurement of liquid flow in closed conduits by the weighing method β Procedures for checking installations
ISO 9368-1:1990 Part 1: Static weighing systems
ISO 9394:2012 Ophthalmic optics β Contact lenses and contact lens care products β Determination of biocompatibility by ocular study with rabbit eyes
ISO 9407 Shoe sizes β Mondopoint system of sizing and marking
ISO 9431:1990 Construction drawings β Spaces for drawing and for text, and title blocks on drawing sheets
ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
ISO 9493:2010 Geometrical product specifications (GPS) β Dimensional measuring equipment: Dial test indicators (lever type) β Design and metrological characteristics
ISO/IEC 9496:2003
CHILL - The
ITU-T programming language
ISO 9506 Industrial automation systems - Manufacturing Message Specification
ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
ISO/IEC 9541 Information technology β Font information interchange
ISO/IEC 9541-1:2012 Part 1: Architecture
ISO/IEC 9541-2:2012 Part 2: Interchange Format
ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
ISO 9542:1988 Information processing systems β Telecommunications and information exchange between systems β End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
ISO 9543:1989 Information processing systems β Information exchange between systems β Synchronous transmission signal quality at DTE/DCE interfaces
ISO/IEC 9545:1994 Information technology β Open Systems Interconnection β Application Layer structure
ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
ISO/IEC 9548 Information technology β Open Systems Interconnection β Connectionless Session protocol
ISO 9568:1993 Cinematography β Background acoustic noise levels in theatres, review rooms and dubbing rooms
ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
ISO/IEC 9574:1992 Information technology β Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
ISO/IEC TR 9575:1995 Information technology β Telecommunications and information exchange between systems β OSI Routeing Framework
ISO/IEC 9576 Information technology β Open Systems Interconnection β Connectionless Presentation protocol
ISO 9611:1996 Acoustics β Characterization of sources of structure-borne sound with respect to sound radiation from connected structures β Measurement of velocity at the contact points of machinery when resiliently mounted
ISO 9613 Acoustics β Attenuation of sound during propagation outdoors
ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
ISO 9613-2:1996 Part 2: General method of calculation
ISO 9614 Acoustics β Determination of sound power levels of noise sources using sound intensity
ISO 9614-1:1993 Part 1: Measurement at discrete points
ISO 9614-2:1996 Part 2: Measurement by scanning
ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices β Requirements and test methods
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
ISO/IEC 9636-2:1991 Part 2: Control
ISO/IEC 9636-3:1991 Part 3: Output
ISO/IEC 9636-4:1991 Part 4: Segments
ISO/IEC 9636-5:1991 Part 5: Input and echoing
ISO/IEC 9636-6:1991 Part 6: Raster
ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) β Data stream binding
ISO/IEC 9637-1:1994 Part 1: Character encoding
ISO/IEC 9637-2:1992 Part 2: Binary encoding
ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
ISO/IEC 9638-3:1994 Part 3: Ada
ISO 9645:1990 Acoustics β Measurement of noise emitted by two-wheeled mopeds in motion β Engineering method
ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (
TTCN)
ISO/IEC 9646-4:1994 Part 4: Test realization
ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
ISO 9660:1988 Information processing β Volume and file structure of
CD-ROM for information interchange
ISO/IEC 9661:1994 Information technology β Data interchange on 12,7 mm wide magnetic tape cartridges β 18 tracks, 1 491 data bytes per millimetre
ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
ISO 9668:1990 Pulps β Determination of magnesium content β Flame atomic absorption spectrometric method [Withdrawn: replaced with ISO 12830]
ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
ISO 9688:1990 Mechanical vibration and shock β Analytical methods of assessing shock resistance of mechanical systems β Information exchange between suppliers and users of analyses
ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
ISO 9706:1994 Information and documentation β Paper for documents β Requirements for permanence
ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
ISO 9713:2002 Neurosurgical implants β Self-closing intracranial aneurysm clips
ISO 9714 Orthopaedic drilling instruments
ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) β Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 4]
ISO 9735-1:2002 Part 1: Syntax rules common to all parts
ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type β CONTRL)
ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type β AUTACK)
ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
ISO 9735-8:2002 Part 8: Associated data in EDI
ISO 9735-9:2002 Part 9: Security key and certificate management message (message type β KEYMAN)
ISO 9735-10:2014 Part 10: Syntax service directories
ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
ISO/IEC 9798 Information technology β Security techniques β Entity authentication
ISO/IEC 9798-1:2010 Part 1: General
ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
ISO 9801:2009 Ophthalmic instruments β Trial case lenses
ISO 9802:1996 Raw optical glass β Vocabulary
ISO/IEC 9804:1998 Information technology β Open Systems Interconnection β Service definition for the Commitment, Concurrency and Recovery service element
ISO/IEC 9805 Information technology β Open Systems Interconnection β Protocol for the Commitment, Concurrency and Recovery service element
ISO/IEC/IEEE 9945:2009 Information technology β Portable Operating System Interface (
POSIXΒ) Base Specifications, Issue 7
ISO 9947:2005 Textile machinery and accessories β Two-for-one twisters β Vocabulary
ISO 9949 Urine absorbing aids - Vocabulary
ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
ISO 9949-2:1993 Part 2: Products
ISO 9949-3:1993 Part 3: Identification of product types
ISO 9951:1993 Measurement of gas flow in closed conduits β Turbine meters
ISO 9957 Fluid draughting media
ISO 9957-1:1992 Part 1: Water-based India ink β Requirements and test conditions
ISO 9957-2:1995 Part 2: Water-based non-India ink β Requirements and test conditions
ISO 9957-3:1997 Part 3: Water-based coloured draughting inks β Requirements and test conditions
ISO 9958 Draughting media for technical drawings β Draughting film with polyester base
ISO 9958-1:1992 Part 1: Requirements and marking
ISO 9958-2:1992 Part 2: Determination of properties
ISO 9959 Numerically controlled draughting machines β Drawing test for the evaluation of performance
ISO 9959-1:1992 Part 1: Vector plotters
ISO 9960 Draughting instruments with or without graduation
ISO 9960-1:1992 Part 1: Draughting scale rules
ISO 9961:1992 Draughting media for technical drawings β Natural tracing paper
ISO 9962 Manually operated draughting machines
ISO 9962-1:1992 Part 1: Definitions, classification and designation
ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items