From Wikipedia, the free encyclopedia

This is a list of published [Note 1] International Organization for Standardization (ISO) standards and other deliverables. [Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. [1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 ( JTC 1) have been made freely and publicly available. [2]

ISO 2000 – ISO 2299

  • ISO 2000:2020 Rubber, raw natural β€” Guidelines for the specification of technically specified rubber (TSR)
  • ISO 2002:1975 Raw styrene-butadiene rubber (SBR) β€” Determination of organic acid content [Withdrawn: replaced with ISO 7781]
  • ISO 2003:1975 Raw styrene-butadiene rubber (SBR) β€” Determination of soap content [Withdrawn: replaced with ISO 7781]
  • ISO 2004:2017 Natural rubber latex concentrate β€” Centrifuged or creamed, ammonia-preserved types β€” Specifications
  • ISO 2005:2014 Rubber latex, natural, concentrate β€” Determination of sludge content
  • ISO 2006 Rubber latex, synthetic β€” Determination of mechanical stability
    • ISO 2006-1:2009 Part 1: High-speed method
    • ISO 2006-1:2009 Part 2: Moderate-speed method under load
  • ISO 2007:2018 Rubber, unvulcanized β€” Determination of plasticity β€” Rapid-plastimeter method
  • ISO 2008:1987 Rubber latex, styrene-butadiene β€” Determination of volatile unsaturates [Withdrawn without replacement]
  • ISO 2009:2011 Slotted countersunk flat head screws β€” Product grade A
  • ISO 2010:2011 Slotted raised countersunk head screws β€” Product grade A
  • ISO 2011 Nuclear energy β€” Vocabulary β€” second list [draft incorporated into ISO 921] [3]
  • ISO 2012:1976 Textile machinery and accessories β€” Cone sectional warping machines β€” Maximum usable width
  • ISO 2013:1983 Textile machinery and accessories β€” Beams β€” Method of measuring variations of form and position [Withdrawn: replaced with ISO 8116-8]
  • ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2016:1981 Capillary solder fittings for copper tubes β€” Assembly dimensions and tests
  • ISO 2017 Mechanical vibration and shock – Resilient mounting systems
    • ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
    • ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
    • ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
  • ISO 2020 Aerospace β€” Preformed flexible steel wire rope for aircraft controls
    • ISO 2020-1:1997 Part 1: Dimensions and loads
    • ISO 2020-2:1997 Part 2: Technical specification
  • ISO 2021:1975 Data processing β€” Implementation of the ISO 8- bit coded character sets on punched cards [Withdrawn: replaced with ISO 6586]
  • ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
  • ISO 2023:1994 Rubber footwear β€” Lined industrial vulcanized-rubber boots β€” Specification [Withdrawn: replaced with ISO 20344]
  • ISO 2024:1981 Rubber footwear, lined conducting β€” Specification [Withdrawn without replacement]
  • ISO 2025:1972 Lined industrial rubber boots with general purpose oil resistance [Withdrawn without replacement]
  • ISO 2026:2020 Aircraft β€” Connections for starting engines by air
  • ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved β€” Specification
  • ISO 2028:2015 Synthetic rubber latex β€” Preparation of dry polymer
  • ISO 2030:2018 Granulated cork β€” Size analysis by mechanical sieving
  • ISO 2031:2015 Granulated cork β€” Determination of apparent bulk density
  • ISO 2032:1973 Heat-resisting equipment wires for aircraft
  • ISO 2033:1983 Information processing – Coding of machine readable characters (MICR and OCR)
  • ISO 2035:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure β€” Pressure-resistance test [Withdrawn without replacement]
  • ISO 2036:1976 Wood for manufacture of wood flooring β€” Symbols for marking according to species
  • ISO 2037:1992 Stainless steel tubes for the food industry [Withdrawn without replacement]
  • ISO 2039 Plastics β€” Determination of hardness
    • ISO 2039-1:2001 Part 1: Ball indentation method
    • ISO 2039-2:1987 Part 2: Rockwell hardness
    • ISO 2040:1972 Strontium chromate pigments for paints
  • ISO 2041:2009 Mechanical vibration, shock and condition monitoring – Vocabulary
  • ISO 2042:1973 Aircraft electrical circuit diagrams
  • ISO 2043:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure β€” Oven test [Withdrawn: replaced with ISO 580]
  • ISO 2044:1974 Unplasticized polyvinyl chloride (PVC) moulded solvent-welded socket fittings for use with pressure pipe β€” Hydraulic internal pressure test
  • ISO 2045:1988 Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints β€” Minimum depths of engagement [Withdrawn: replaced with ISO 1452-(2,3)]
  • ISO 2046:1973 Gaseous breathing oxygen supplies for aircraft
  • ISO 2047:1975 Information processing – Graphical representations for the control characters of the 7- bit coded character set
  • ISO 2048:1990 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints β€” Minimum depths of engagement [Withdrawn: replaced with ISO 1452-3]
  • ISO 2049:1996 Petroleum products β€” Determination of colour (ASTM scale)
  • ISO 2050:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Flame emission spectrophotometric method [Withdrawn without replacement]
  • ISO 2051:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Potassium tetraphenylborate gravimetric method [Withdrawn without replacement]
  • ISO 2052:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Sodium tetraphenylborate titrimetric method [Withdrawn without replacement]
  • ISO 2053:1976 Potassium chloride for industrial use β€” Determination of moisture content β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2056:1976 Moulded polyvinyl chloride (PVC) pipes and fittings β€” Determination of Vicat softening temperature [Withdrawn: replaced with ISO 2507, now ISO 2507-(1-2)]
  • ISO 2057:1981 Agricultural tractors β€” Remote control hydraulic cylinders for trailed implements
  • ISO 2058:1973 Raw styrene butadiene rubber (SBR) β€” Determination of volatile matter [Withdrawn: replaced with ISO 248]
  • ISO 2059: Concrete and reinforced concrete β€” notation [Rejected draft] [3]
  • ISO 2060:1994 Textiles β€” Yarn from packages β€” Determination of linear density (mass per unit length) by the skein method
  • ISO 2061:2015 Textiles β€” Determination of twist in yarns β€” Direct counting method
  • ISO 2062:2009 Textiles β€” Yarns from packages β€” Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
  • ISO 2063 Thermal spraying β€” Zinc, aluminium and their alloys
    • ISO 2063-1:2019 Part 1: Design considerations and quality requirements for corrosion protection systems
    • ISO 2063-2:2017 Part 2: Execution of corrosion protection systems
  • ISO 2064:1996 Metallic and other inorganic coatings β€” Definitions and conventions concerning the measurement of thickness
  • ISO 2065:1972 Textile machinery and accessories β€” Cylindrical tubes for tape yarns [Withdrawn: replaced with ISO 3914-3]
  • ISO 2066:2004 Resilient floor coverings β€” Determination of moisture content of agglomerated composition cork
  • ISO 2067:2019 Granulated cork, broken cork and crushed cork β€” Sampling for the determination of moisture content
  • ISO 2068:1972 Barium chromate pigments for paints
  • ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium β€” Determination of calcium content β€” Flame atomic absorption method [Withdrawn without replacement]
  • ISO 2070:1997 Aluminium oxide primarily used for the production of aluminium β€” Determination of calcium content [Withdrawn without replacement]
  • ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium β€” Determination of zinc content β€” Flame atomic absorption method [Withdrawn without replacement]
  • ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium β€” Determination of zinc content β€” PAN photometric method [Withdrawn without replacement]
  • ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium β€” Preparation of solution for analysis β€” Method by hydrochloric acid attack under pressure [Withdrawn without replacement]
  • ISO 2074:2007 Plywood – Vocabulary
  • ISO 2075:1972 Cutting netting to shape β€” Determination of the cutting rate [Withdrawn without replacement]
  • ISO 2076:2021 Textiles – Man-made fibres – Generic names
  • ISO 2077:1979 Pure expanded corkboard β€” Determination of the modulus of rupture by bending [Withdrawn without replacement]
  • ISO 2078:1993 Textile glass β€” Yarns β€” Designation
  • ISO 2079:1981 Surface treatment and metallic coatings β€” General classification of terms [Withdrawn: replaced with ISO 2080]
  • ISO 2080:2022 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary
  • ISO 2081:2018 Metallic and other inorganic coatings β€” Electroplated coatings of zinc with supplementary treatments on iron or steel
  • ISO 2082:2017 Metallic and other inorganic coatings β€” Electroplated coatings of cadmium with supplementary treatments on iron or steel
  • ISO 2083:1973 Gasoline β€” Determination of lead content β€” Volumetric chromate method [Withdrawn without replacement]
  • ISO 2084:1974 Pipeline flanges for general use β€” Metric series β€” Mating dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2085:2018 Anodizing of aluminium and its alloys β€” Check for continuity of thin anodic oxidation coatings β€” Copper sulfate test
  • ISO/R 2091:1971 Hydraulic cylinders β€” Internal diameters and piston rod diameters β€” Metric series [Withdrawn without replacement]
  • ISO 2092:1981 Light metals and their alloys β€” Code of designation based on chemical symbols [Withdrawn without replacement]
  • ISO 2093:1986 Electroplated coatings of tin β€” Specification and test methods
  • ISO 2094:1999 Textile floor coverings β€” Determination of thickness loss under dynamic loading
  • ISO 2095:1977 Textile floor coverings β€” Determination of mass of effective pile per unit area that can be shorn away from the substrate [Withdrawn: replaced with ISO 8543]
  • ISO 2096:1972 Glycerols for industrial use β€” Methods of sampling
  • ISO 2097:1972 Glycerols for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2098:1972 Glycerols for industrial use β€” Determination of ash β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2099:1972 Purified glycerol for industrial use β€” Determination of density at 20 degrees C [Withdrawn without replacement]
  • ISO 2100:1987 Aircraft β€” Electrical connectors β€” Tests
  • ISO/R 2101:1971 Aluminium and aluminium alloys β€” Shear test for rivet wire and rivets [Withdrawn without replacement]
  • ISO 2103:1986 Loads due to use and occupancy in residential and public buildings [Withdrawn without replacement]
  • ISO/R 2105:1971 Textile machinery and accessories β€” Tubes for draw-winders for man-made fibres [Withdrawn: replaced with ISO 3914-3]
  • ISO 2106:2019 Anodizing of aluminium and its alloys β€” Determination of mass per unit area (surface density) of anodic oxidation coatings β€” Gravimetric method
  • ISO 2107:2007 Aluminium and aluminium alloys β€” Wrought products β€” Temper designations
  • ISO 2108:2005 Information and documentation – International standard book number (ISBN)
  • ISO 2109:1975 Continuous mechanical handling equipment β€” Light duty belt conveyors for loose bulk materials
  • ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
  • ISO 2111:1985 Data communication β€” Basic mode control procedures β€” Code independent information transfer [Withdrawn without replacement]
  • ISO 2112:1990 Plastics β€” Aminoplastic moulding materials β€” Specification [Withdrawn: replaced with ISO 14527-(1-3) and ISO 14528-(1-3)]
  • ISO 2113:1996 Reinforcement fibres β€” Woven fabrics β€” Basis for a specification
  • ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) β€” Determination of partial acid value and total acid value
  • ISO 2115:1996 Plastics β€” Polymer dispersions β€” Determination of white point temperature and minimum film-forming temperature
  • ISO 2117 Terms and symbols for flight dynamics β€” Part 1: aircraft motion relative to the air [Draft renamed ISO 1151-1]
  • ISO 2119:1972 Magnesium-zinc-zirconium alloy castings β€” Chemical composition [Withdrawn: replaced with ISO 3115]
  • ISO 2120:1972 Liquid chlorine for industrial use β€” Determination of the content of chlorine by volume in the vaporized product
  • ISO 2121:1972 Liquid chlorine for industrial use β€” Determination of water content β€” Gravimetric method
  • ISO 2122:1972 Sodium and potassium silicates for industrial use β€” Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
  • ISO 2123:1972 Sodium and potassium silicates for industrial use β€” Determination of dynamic viscosity [Withdrawn without replacement]
  • ISO 2124:1972 Sodium and potassium silicates for industrial use β€” Determination of silica content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2125:1975 Continuous mechanical handling equipment for loose bulk materials β€” Vibrating feeders and conveyors, shaking or reciprocating feeders and oscillating conveyors β€” Safety code [Withdrawn: replaced with ISO 8456]
  • ISO 2126:1975 Office machines β€” Basic arrangement for the alphanumeric section of keyboards operated with both hands [Withdrawn: replaced with ISO 9995-(1,7)]
  • ISO 2128:2010 Anodizing of aluminium and its alloys β€” Determination of thickness of anodic oxidation coatings β€” Non-destructive measurement by split-beam microscope
  • ISO 2131:1972 Surface active agents β€” Simplified classification
  • ISO 2132:1972 Offset duplicators β€” Attachment features of plates [Withdrawn without replacement]
  • ISO 2133:1976 Stencils for duplicators β€” Minimum overprint and attachment features [Withdrawn without replacement]
  • ISO 2135:2017 Anodizing of aluminium and its alloys β€” Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
  • ISO/TR 2136:1977 Wrought aluminium and aluminium alloys β€” Rolled products β€” Mechanical properties [Withdrawn: replaced with ISO 6361-2]
  • ISO 2137:2020 Petroleum products and lubricants β€” Determination of cone penetration of lubricating greases and petrolatum [Withdrawn without replacement]
  • ISO 2139:1975 Continuous mechanical handling equipment for loose bulk materials β€” Oscillating conveyors and shaking or reciprocating feeders with tubular trough
  • ISO 2140:1975 Continuous mechanical handling equipment for loose bulk materials β€” Apron conveyors
  • ISO 2141:1972 Lifting hooks β€” General characteristics [Withdrawn without replacement]
  • ISO 2142:1981 Wrought aluminium, magnesium and their alloys β€” Selection of specimens and test pieces for mechanical testing
  • ISO 2143:2017 Anodizing of aluminium and its alloys β€” Estimation of loss of absorptive power of anodic oxidation coatings after sealing β€” Dye-spot test with prior acid treatment
  • ISO 2144:2019 Paper, board, pulps and cellulose nanomaterials β€” Determination of residue (ash content) on ignition at 900 Β°C
  • ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
  • ISO 2146:2010 Information and documentation – Registry services for libraries and related organizations
  • ISO/R 2147:1971 Aluminium alloys β€” Sand cast test pieces β€” Mechanical properties [Withdrawn: replaced with ISO 3522]
  • ISO 2148:1974 Continuous handling equipment – Nomenclature
  • ISO 2149:1975 Continuous mechanical handling equipment for unit loads β€” Overhead monorail chain conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2150:1975 Continuous mechanical handling equipment for unit loads β€” Overhead twin rail chain conveyors (power and free) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
  • ISO 2155:1974 Aircraft β€” Fire-resisting electrical cables β€” Performance requirements
  • ISO 2156:1974 Aircraft β€” Fire-resisting electrical cables β€” Methods of test
  • ISO 2157:2016 Dentistry β€” Nominal diameters and designation code numbers for rotary instruments
  • ISO 2160:1998 Petroleum products β€” Corrosiveness to copper β€” Copper strip test
  • ISO 2161 UNJ threads for Aerospace-Inch Series [Rejected draft] [4]
  • ISO 2162 Technical product documentation – Springs
    • ISO 2162-1:1993 Part 1: Simplified representation
    • ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
    • ISO 2162-3:1993 Part 3: Vocabulary [Withdrawn: replaced with ISO 26909]
  • ISO 2163:1975 Industrial trucks β€” Wheels and castors β€” Vocabulary [Withdrawn: replaced with ISO 22877]
  • ISO 2164:1975 Pulses β€” Determination of glycosidic hydrocyanic acid
  • ISO 2165:1974 Ware potatoes β€” Guide to storage
  • ISO 2166:1981 Carrots β€” Guide to storage
  • ISO 2167:1991 Round-headed cabbage β€” Guide to cold storage and refrigerated transport
  • ISO 2168:1974 Table grapes β€” Guide to cold storage
  • ISO 2169:1981 Fruits and vegetables β€” Physical conditions in cold stores β€” Definitions and measurement
  • ISO 2170:1980 Cereals and pulses β€” Sampling of milled products [Withdrawn: replaced with ISO 13690, later ISO 24333]
  • ISO 2171:2007 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2172:1983 Fruit juice β€” Determination of soluble solids content β€” Pycnometric method
  • ISO 2173:2003 Fruit and vegetable products β€” Determination of soluble solids β€” Refractometric method
  • ISO 2174:1990 Surface active agents β€” Preparation of water with known calcium hardness
  • ISO 2175:1981 Industrial wheels for non-powered equipment β€” Dimensions and nominal load capacities [Withdrawn: replaced with ISO 22883 and ISO 22884]
  • ISO 2176:1995 Petroleum products β€” Lubricating grease β€” Determination of dropping point
  • ISO 2177:2003 Metallic coatings β€” Measurement of coating thickness β€” Coulometric method by anodic dissolution
  • ISO 2178:2016 Non-magnetic coatings on magnetic substrates β€” Measurement of coating thickness β€” Magnetic method
  • ISO 2179:1986 Electroplated coatings of tin-nickel alloy β€” Specification and test methods
  • ISO 2182 Tests for colour fastness of textiles – Sixth series [Draft renamed ISO/R 105-6]
  • ISO 2184 Industrial castors β€” Dimensions of top plates
  • ISO 2184-1:1972 Part 1: Oblong top-plates with 4 bolt holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
  • ISO 2185:1972 Muscovite mica blocks, thins and films β€” Visual classification [Withdrawn without replacement]
  • ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
  • ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
  • ISO 2189:1986 Expanded pure agglomerated cork β€” Determination of bulk density [Withdrawn without replacement]
  • ISO 2190:2016 Granulated cork β€” Determination of moisture content
  • ISO 2191:1972 Cork β€” Expanded pure agglomerated β€” Deformation under constant pressure [Withdrawn without replacement]
  • ISO 2192:1984 Petroleum products β€” Determination of total sulfur content β€” Lamp method [Withdrawn without replacement]
  • ISO 2194:1991 Industrial screens β€” Woven wire cloth, perforated plate and electroformed sheet β€” Designation and nominal sizes of openings
  • ISO 2195:1972 Data interchange on rolled-up punched paper tape β€” General requirements [Withdrawn without replacement]
  • ISO 2196:1975 Continuous mechanical handling equipment for unit loads β€” Single strand floor mounted truck conveyors (chain above floor) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2197:1972 Sodium hydrogen carbonate for industrial use β€” List of methods of test and preparation of the test sample
  • ISO 2198:1972 Sodium hydrogen carbonate for industrial use β€” Determination of sodium carbonate β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2199:1972 Sodium hydrogen carbonate for industrial use β€” Determination of sodium hydrogen carbonate content β€” Titrimetric method
  • ISO 2200:1972 Sodium hydrogen carbonate for industrial use β€” Determination of moisture content β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2201:1972 Sodium hydrogen carbonate for industrial use β€” Determination of chloride content β€” Mercurimetric method [Withdrawn without replacement]
  • ISO 2202:1972 Liquid chlorine for industrial use β€” Determination of water content using an electrolytic analyser [Withdrawn without replacement]
  • ISO 2203:1973 Technical drawings – Conventional representation of gears
  • ISO 2204:1979 Acoustics β€” Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings [Withdrawn without replacement]
  • ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
  • ISO 2206:1987 Packaging β€” Complete, filled transport packages β€” Identification of parts when testing
  • ISO 2207:1980 Petroleum waxes β€” Determination of congealing point
  • ISO 2208:1973 Phenol, o-cresol, m-cresol and p-cresol for industrial use β€” Determination of crystallizing point after drying with a molecular sieve [Withdrawn without replacement]
  • ISO 2209:1973 Liquid halogenated hydrocarbons for industrial use β€” Sampling
  • ISO 2210:1972 Liquid halogenated hydrocarbons for industrial use β€” Determination of residue on evaporation [Withdrawn without replacement]
  • ISO 2211:1973 Liquid chemical products β€” Measurement of colour in Hazen units (platinum-cobalt scale)
  • ISO 2212:1972 Trichloroethylene for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2213:1972 Perchloroethylene for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2214:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use β€” Determination of manganese content β€” Formaldehyde oxime photometric method [Withdrawn without replacement]
  • ISO 2215:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use β€” Determination of copper content β€” Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2216:1972 Crude sodium borates for industrial use β€” Determination of sodium oxide and boric oxide contents β€” Volumetric method [Withdrawn without replacement]
  • ISO 2217:1972 Crude sodium borates for industrial use β€” Determination of matter insoluble in alkaline medium and preparation of test solutions [Withdrawn without replacement]
  • ISO 2218:1972 Crude sodium borates for industrial use β€” Determination of loss in mass after heating at 900 degrees C [Withdrawn without replacement]
  • ISO 2219:2010 Thermal insulation products for buildings β€” Factory-made products of expanded cork (ICB) β€” Specification
  • ISO 2220:1972 Hand finishing sticks and oil stones β€” Dimensions [Withdrawn: replaced with ISO 603-(1-16)]
  • ISO 2221:1972 Formaldehyde solutions for industrial use β€” Limit test for inorganic chlorides [Withdrawn without replacement]
  • ISO 2222:1972 Formaldehyde solutions for industrial use β€” Limit test for inorganic sulphates [Withdrawn without replacement]
  • ISO 2223:1972 Formaldehyde solutions for industrial use β€” Limit test for heavy metals (excluding iron) [Withdrawn without replacement]
  • ISO 2224:1972 Formaldehyde solutions for industrial use β€” Determination of ash [Withdrawn without replacement]
  • ISO 2225:1972 Formaldehyde solutions for industrial use β€” Determination of acidity [Withdrawn without replacement]
  • ISO 2226:1972 Formaldehyde solutions for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 2227:1972 Formaldehyde solutions for industrial use β€” Determination of formaldehyde content
  • ISO 2228:1972 Formaldehyde solutions for industrial use β€” Determination of methanol content
  • ISO 2229:1973 Equipment for the petroleum and natural gas industries β€” Steel pipe flanges, nominal sizes 1/2 to 24 in β€” Metric dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2230:2002 Rubber products β€” Guidelines for storage
  • ISO 2231:1989 Rubber- or plastics-coated fabrics β€” Standard atmospheres for conditioning and testing
  • ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes β€” Specifications
  • ISO 2233:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Conditioning for testing
  • ISO 2234:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Stacking tests using a static load
  • ISO 2235:1993 Abrasive sheets β€” Dimensions, tolerances and designation [Withdrawn: replaced with ISO 21948]
  • ISO 2236:1991 Assembly tools for screws and nuts β€” Forged and tubular socket wrenches β€” Maximum outside head dimensions
  • ISO 2238:2018 Machine bridge reamers
  • ISO 2239:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of daylight [Withdrawn: replaced with ISO 7589]
  • ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
  • ISO 2241:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of tungsten illumination [Withdrawn: replaced with ISO 7589]
  • ISO 2242:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of photoflood illumination [Withdrawn: replaced with ISO 7589]
  • ISO/R 2243:1972 Photography β€” Illumination conditions for viewing colour transparencies and their reproductions [Withdrawn: replaced with ISO 3664]
  • ISO 2244:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Horizontal impact tests
  • ISO 2245:2006 Shaped insulating refractory products β€” Classification
  • ISO 2246:1972 Dense shaped refractory products β€” Nomenclature of manufacturing processes [Withdrawn without replacement]
  • ISO 2247:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Vibration tests at fixed low frequency
  • ISO 2248:1985 Packaging β€” Complete, filled transport packages β€” Vertical impact test by dropping
  • ISO 2249:1973 Acoustics β€” Description and measurement of physical properties of sonic booms
  • ISO 2250:2017 Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
  • ISO 2251:1991 Lined antistatic rubber footwear β€” Specification [Withdrawn without replacement]
  • ISO 2252:1983 Rubber footwear, lined industrial, for use at low temperatures [Withdrawn without replacement]
  • ISO 2253:1999 Curry powder β€” Specification
  • ISO 2254:2004 Cloves, whole and ground (powdered) β€” Specification
  • ISO 2255:1996 Coriander (Coriandrum sativum L.), whole or ground (powdered) β€” Specification
  • ISO 2256:1984 Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) β€” Specification
  • ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
  • ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
  • ISO 2259:1972 Pots for propagation and transplantation made of peat and other plant material β€” Sampling [Withdrawn without replacement]
  • ISO 2261:1994 Reciprocating internal combustion engines β€” Hand-operated control devices β€” Standard direction of motion
  • ISO 2262:1984 General purpose thimbles for use with steel wire ropes β€” Specification
  • ISO 2264:1972 Rolling bearings β€” Bearings with spherical outside surface and extended inner ring width [Withdrawn: replaced with ISO 9628]
  • ISO/R 2265:1972 Rolling bearings with locating snap ring β€” Dimensions [Withdrawn: replaced with ISO 464]
  • ISO 2266:1974 Textile machinery and accessories β€” Metal travellers for spinning and twisting [Withdrawn: replaced with ISO 96-(1-2)]
  • ISO 2267:1986 Surface active agents β€” Evaluation of certain effects of laundering β€” Methods of preparation and use of unsoiled cotton control cloth
  • ISO 2268:1972 Surface active agents (non-ionic) β€” Determination of polyethylene glycols and non-ionic active matter (adducts) β€” Weibull method
  • ISO 2269:2000 Shipbuilding β€” Class A magnetic compasses, azimuth reading devices and binnacles β€” Tests and certification [Withdrawn: replaced with ISO 25862]
  • ISO 2270:1989 Non-ionic surface active agents β€” Polyethoxylated derivatives β€” Iodometric determination of oxyethylene groups
  • ISO 2271:1989 Surface active agents β€” Detergents β€” Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
  • ISO 2272:1989 Surface active agents β€” Soaps β€” Determination of low contents of free glycerol by molecular absorption spectrometry
  • ISO 2276:1972 Reciprocating internal combustion engines β€” Definition of right-hand and left-hand single bank engines [Withdrawn: replaced with ISO 1204]
  • ISO 2277:1973 Static invertors for aircraft
  • ISO 2281:1990 Horology – Water-resistant watches [Withdrawn: replaced with ISO 22810:2010]
  • ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in β€” Reduced shank taps
  • ISO 2284:2017 Hand taps for parallel and taper pipe threads β€” General dimensions and marking
  • ISO 2285:2019 Rubber, vulcanized or thermoplastic β€” Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
  • ISO 2286 Rubber- or plastics-coated fabrics β€” Determination of roll characteristics
    • ISO 2286-1:2016 Part 1: Methods for determination of length, width and net mass
    • ISO 2286-2:2016 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
    • ISO 2286-3:2016 Part 3: Method for determination of thickness
  • ISO 2288:1997 Agricultural tractors and machines β€” Engine test code β€” Net power [Withdrawn without replacement]
  • ISO 2289:1972 Rotary drilling equipment β€” Kellys [Withdrawn without replacement]
  • ISO 2290:1972 Rotary drilling equipment β€” Upper and lower Kelly cocks [Withdrawn without replacement]
  • ISO 2291:1980 Cocoa beans β€” Determination of moisture content (Routine method) [Withdrawn: replaced with ISO 2451]
  • ISO 2292:2017 Cocoa beans β€” Sampling
  • ISO 2293:1988 Meat and meat products β€” Enumeration of micro-organisms β€” Colony count technique at 30 degrees C (Reference method) [Withdrawn without replacement]
  • ISO 2294:1974 Meat and meat products β€” Determination of total phosphorus content (Reference method) [Withdrawn: replaced with ISO 23776]
  • ISO 2295:1974 Avocados β€” Guide for storage and transport
  • ISO 2296:2018 Metal slitting saws with fine and coarse teeth β€” Metric series
  • ISO 2297:1973 Chemical analysis of aluminium and its alloys β€” Complexometric determination of magnesium
  • ISO/R 2298:1972 Alluminium and its alloys β€” Determination of chromium β€” Spectrophotometric method using diphenylcarbazide [Withdrawn without replacement]
  • ISO 2299:1973 Sawn timber of broadleaved species β€” Defects β€” Classification

ISO 2300 – ISO 2499

  • ISO 2300:1973 Sawn timber of broadleaved species β€” Defects β€” Terms and definitions
  • ISO 2301:1973 Sawn timber of broadleaved species β€” Defects β€” Measurement
  • ISO 2302:2020 Isobutene-isoprene rubber (IIR) β€” Evaluation procedure
  • ISO 2303:2019 Isoprene rubber (IR) β€” Non-oil-extended, solution-polymerized types β€” Evaluation procedures
  • ISO 2306:1972 Drills for use prior to tapping screw threads
  • ISO 2307:2019 Fibre ropes β€” Determination of certain physical and mechanical properties
  • ISO 2308:1972 Hooks for lifting freight containers of up to 30 tonnes capacity β€” Basic requirements
  • ISO 2309:1980 Coke β€” Sampling [Withdrawn: replaced with ISO 18283]
  • ISO 2311:1972 Electrolytic cathode copper [Withdrawn: replaced with ISO 431]
  • ISO 2312:1972 Carbon tetrachloride for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2313 Textiles β€” Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery
  • ISO 2313-1:2021 Part 1: Method of the horizontally folded specimen
  • ISO 2313-2:2021 Part 2: Method of the vertically folded specimen
  • ISO 2314:2009 Gas turbines β€” Acceptance tests
  • ISO 2315:1980 Aircraft β€” Two- and four-pole sealed electromagnetic relays, 2 A and 3 A β€” Clearance and fixing dimensions
  • ISO 2316:1973 Rolling bearings β€” Metric tapered roller bearings β€” Bearing width and cup width [Withdrawn: replaced with ISO 355]
  • ISO 2318 Measurement of carbon variation in threads of hardened and tempered bolts, screws, and studs [Rejected draft]
  • ISO 2320:2015 Fasteners β€” Prevailing torque steel nuts β€” Functional properties
  • ISO 2321:2017 Rubber threads β€” Methods of test
  • ISO 2322:2014 Styrene-butadiene rubber (SBR) β€” Emulsion- and solution-polymerized types β€” Evaluation procedures
  • ISO 2324:1972 End mills and slot drills β€” Milling cutters with 7/24 taper shanks [Withdrawn: replaced with ISO 1641-3]
  • ISO 2325:1986 Coke β€” Size analysis (Nominal top size 20 mm or less) [Withdrawn: replaced with ISO 728]
  • ISO 2326:1972 Continuous mechanical handling equipment for loose bulk materials β€” Aeroslides
  • ISO 2327:1972 Pneumatic handling appliances for loose bulk materials β€” Piping
  • ISO 2328:2011 Fork-lift trucks β€” Hook-on type fork arms and fork arm carriages β€” Mounting dimensions
  • ISO 2329:1983 Fork-lift trucks β€” Fork arms β€” Dimensions [Withdrawn without replacement]
  • ISO 2330:2002 Fork-lift trucks β€” Fork arms β€” Technical characteristics and testing
  • ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
  • ISO 2332:2009 Agricultural tractors and machinery β€” Connection of implements via three-point linkage β€” Clearance zone around implement
  • ISO 2333:1972 Shipbuilding β€” Cargo gear particulars book [Withdrawn without replacement]
  • ISO 2335 Commercial refrigerated cabinets β€” Methods of test β€” Temperature Test [Draft renamed ISO 1992-3]
  • ISO 2336:1980 Hand and machine hacksaw blades β€” Dimensions for lengths up to 450 mm and pitches up to 6,3 mm [Withdrawn without replacement]
  • ISO 2337 [Draft merged into ISO 370]
  • ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
  • ISO 2339:1986 Taper pins, unhardened
  • ISO 2340:1986 Clevis pins without head
  • ISO 2341:1986 Clevis pins with head
  • ISO 2342:2003 Slotted headless screws with shank
  • ISO 2343:1972 Hexagon socket set screws β€” Metric series [Withdrawn: replaced with ISO 4026, ISO 4027, ISO 4028, and ISO 4029]
  • ISO 2344:1998 Road vehicles β€” M14 x 1,25 spark-plugs with conical seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2345:1994 Road vehicles β€” M18 x 1,5 spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
  • ISO 2346:2001 Road vehicles β€” M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing [Withdrawn without replacement]
  • ISO 2347:1994 Road vehicles β€” M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
  • ISO 2349:1973 Rolling bearings β€” Tapered rolling bearings β€” Sub-units β€” Tolerances β€” Metric series, normal tolerance class and tolerance class 6 β€” Inch series, tolerance class 4 (normal tolerance class) [Withdrawn: Replaced with ISO 492 and ISO 578 (now withdrawn)]
  • ISO 2351 Assembly tools for screws and nuts β€” Machine-operated screwdriver bits
    • ISO 2351-1:2007 Part 1: Screwdriver bits for slotted head screws
    • ISO 2351-2:2002 Part 2: Screwdriver bits for cross-recessed head screws
  • ISO 2352:2000 Assembly tools for screws and nuts β€” Spiral ratchet screwdriver ends β€” Dimensions [Withdrawn without replacement]
  • ISO 2353:1972 Magnesium and its alloys β€” Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver β€” Periodate photometric method
  • ISO 2354:1976 Magnesium alloys β€” Determination of insoluble zirconium β€” Alizarin sulphonate photometric method
  • ISO 2355:1972 Chemical analysis of magnesium and its alloys β€” Determination of rare earths β€” Gravimetric method
  • ISO 2358:1972 Prevailing torque-type steel hexagon locknuts β€” Dimensions β€” Metric series [Withdrawn: replaced with ISO 7040, ISO 7041, ISO 7042, ISO 7043, and ISO 7044]
  • ISO 2359:1972 Prevailing torque-type steel hexagon locknuts β€” Dimensions β€” Inch series [Withdrawn without replacement]
  • ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals β€” Measurement of coating thickness β€” Amplitude-sensitive eddy-current method
  • ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates β€” Measurement of coating thickness β€” Magnetic method
  • ISO 2362:1972 Aluminium fluoride for industrial use β€” Determination of fluorine content β€” Modified Willard-Winter method [Withdrawn without replacement]
  • ISO 2363:1972 Sulphuric acid and oleums for industrial use β€” Determination of oxides of nitrogen β€” 2,4- Xylenol spectrophotometric method [Withdrawn without replacement]
  • ISO 2364:1972 Ammonium nitrate for industrial use β€” Determination of free acidity β€” Volumetric method [Withdrawn without replacement]
  • ISO 2365:1972 Ammonium nitrate for industrial use β€” Measurement of pH value β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2366:1974 Cryolite, natural and artificial β€” Determination of sodium content β€” Flame emission and atomic absorption spectrophotometric methods
  • ISO 2367:1972 Cryolite, natural and artificial β€” Determination of aluminium content β€” 8- Hydroxyquinoline gravimetric method
  • ISO 2368:1972 Aluminium fluoride for industrial use β€” Determination of iron content β€” 1,10- Phenanthroline photometric method [Withdrawn without replacement]
  • ISO 2369:1972 Aluminium fluoride for industrial use β€” Determination of silica content β€” Spectrophotometric method using the reduced silicomolybdic complex [Withdrawn without replacement]
  • ISO 2370:2019 Textiles β€” Determination of fineness of flax fibres β€” Permeametric methods
  • ISO 2371:1974 Field balancing equipment β€” Description and evaluation [Withdrawn without replacement]
  • ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s β€” Basis for specifying evaluation standards [Withdrawn: replaced with ISO 10816-1]
  • ISO 2373:1987 Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm β€” Measurement and evaluation of the vibration severity [Withdrawn without replacement]
  • ISO 2374:1983 Lifting appliances β€” Range of maximum capacities for basic models
  • ISO/IEC 2375:2003 Information technology – Procedure for registration of escape sequences and coded character sets
  • ISO 2376:2019 Anodizing of aluminium and its alloys β€” Determination of breakdown voltage and withstand voltage
  • ISO 2377:1972 Magnesium alloy sand castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2378:1972 Aluminium alloy chill castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2379:1972 Aluminium alloy sand castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2380:1979 Screwdriver blades for slotted head screws [Withdrawn without replacement]
  • ISO 2381:1972 Continuous mechanical handling equipment for unit loads β€” Single strand floor truck conveyors (chain below floor) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO/IEC 2382:2015 Information technology – Vocabulary
    • ISO/IEC 2382-36:2019 Part 36: Learning, education and training
    • ISO/IEC 2382-37:2017 Part 37: Biometrics
  • ISO 2383 Data processing β€” Vocabulary β€” Part 04: Organization of data [Draft merged into ISO 2382]
  • ISO 2384:1977 Documentation – Presentation of translations
  • ISO 2385:2020 Packed cork β€” Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste β€” Sampling to determine moisture content
  • ISO 2386:2019 Packed cork β€” Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste β€” Determination of moisture content
  • ISO 2387:1972 Continuous mechanical handling equipment for loose bulk materials β€” Mobile belt conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2388:1972 Continuous mechanical handling equipment for unit loads β€” Mobile belt conveyors (canvas, rubber, plastic, etc.) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2389:1972 Continuous mechanical handling equipment for loose bulk materials β€” Picking table conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2390:1972 Continuous mechanical handling equipment for loose bulk materials β€” Apron conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2391:1972 Continuous mechanical handling equipment for loose bulk materials β€” Scraper conveyors and "en masse" conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2392:1972 Continuous mechanical handling equipment for loose bulk materials β€” Hydraulic conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2393:2014 Rubber test mixes β€” Preparation, mixing and vulcanization β€” Equipment and procedures
  • ISO 2394:2015 General principles on reliability for structures
  • ISO 2395:1990 Test sieves and test sieving – Vocabulary
  • ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air β€” Specification
  • ISO 2400:2012 Non-destructive testing β€” Ultrasonic testing β€” Specification for calibration block No. 1
  • ISO 2401:2018 Welding consumables β€” Covered electrodes β€” Determination of the efficiency, metal recovery and deposition coefficient
  • ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
  • ISO 2403:2021 Textiles β€” Cotton fibres β€” Determination of micronaire value
  • ISO 2404:1986 Cinematography β€” Six-track magnetic sound records on 70 mm striped release prints β€” Locations and dimensions
  • ISO 2405:1972 Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick [Withdrawn: replaced with ISO 1106-2]
  • ISO 2406:1974 Continuous mechanical handling equipment β€” Mobile and portable conveyors β€” Constructional specifications
  • ISO 2407:1997 Test conditions for internal cylindrical grinding machines with horizontal spindle β€” Testing of accuracy
  • ISO 2408:2017 Steel wire ropes β€” Requirements
  • ISO 2409:2020 Paints and varnishes β€” Cross-cut test
  • ISO 2410:1973 Household refrigerators β€” Methods of test for the information of the consumer [Withdrawn without replacement]
  • ISO 2411:2017 Rubber- or plastics-coated fabrics β€” Determination of coating adhesion
  • ISO 2412:1982 Shipbuilding β€” Colours of indicator lights
  • ISO 2415:2004 Forged shackles for general lifting purposes β€” Dee shackles and bow shackles
  • ISO 2416:1992 Passenger cars β€” Mass distribution
  • ISO 2417:2016 Leather β€” Physical and mechanical tests β€” Determination of the static absorption of water
  • ISO 2418:2017 Leather β€” Chemical, physical and mechanical and fastness tests β€” Sampling location
  • ISO 2419:2012 Leather β€” Physical and mechanical tests β€” Sample preparation and conditioning
  • ISO 2420:2017 Leather β€” Physical and mechanical tests β€” Determination of apparent density and mass per unit area
  • ISO 2421:2003 Coated abrasives β€” Cylindrical sleeves
  • ISO 2422:1986 Truncated cone abrasive sleeves β€” Dimensions and designation [Withdrawn without replacement]
  • ISO 2423:1982 Acceptance conditions for radial drilling machines with the arm adjustable in height β€” Testing of accuracy
  • ISO 2424:2007 Textile floor coverings β€” Vocabulary
  • ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
  • ISO 2426 Plywood β€” Classification by surface appearance
  • ISO 2426-1:2020 Part 1: General
  • ISO 2426-2:2020 Part 2: Hardwood
  • ISO 2426-3:2020 Part 3: Softwood
  • ISO 2426-4:2020 Part 4: Palm-plywood
  • ISO 2427:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of beech [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2428:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of birch [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2429:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2430:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of poplar [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2431:2019 Paints and varnishes β€” Determination of flow time by use of flow cups
  • ISO 2433:1999 Machine tools β€” Test conditions for external cylindrical and universal grinding machines with a movable table β€” Testing of accuracy
  • ISO 2434:1973 Compressed non-breathing air for use in aircraft
  • ISO 2435:1973 Nitrogen for use in aircraft
  • ISO 2436:1973 Heat-resisting equipment wires for aircraft β€” Methods of test
  • ISO 2437:1972 Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick [Withdrawn without replacement]
  • ISO 2438:1981 Rubber latex, synthetic β€” Codification [Withdrawn without replacement]
  • ISO 2439:2008 Flexible cellular polymeric materials β€” Determination of hardness (indentation technique)
  • ISO 2440:2019 Flexible and rigid cellular polymeric materials β€” Accelerated ageing tests
  • ISO 2441:1975 Pipeline flanges for general use β€” Shapes and dimensions of pressure-tight surfaces [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2443:1980 Vines β€” Root stock, cuttings, scions and plants β€” Specification [Withdrawn without replacement]
  • ISO 2444:1988 Joints in building – Vocabulary [Withdrawn: replaced with ISO 6707-1]
  • ISO 2445:1972 Joints in building β€” Fundamental principles for design
  • ISO 2446:2008 Milk β€” Determination of fat content [Withdrawn: replaced with ISO 19662]
  • ISO 2447:1998 Fruit and vegetable products β€” Determination of tin content
  • ISO 2448:1998 Fruit and vegetable products β€” Determination of ethanol content
  • ISO 2449:1974 Milk and liquid milk products β€” Density hydrometers for use in products with a surface tension of approximately 45 mN/m [Withdrawn without replacement]
  • ISO 2450:2008 Cream β€” Determination of fat content β€” Gravimetric method (Reference method)
  • ISO 2451:2017 Cocoa beans β€” Specification and quality requirements
  • ISO 2452 Data processing β€” Vocabulary β€” Part 05: Representation of data [Draft merged into ISO 2382]
  • ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized β€” Determination of bound styrene content β€” Refractive index method
  • ISO 2454:1995 Rubber products β€” Determination of zinc content β€” EDTA titrimetric method
  • ISO 2455 Data processing β€” Vocabulary β€” [Draft merged into ISO 2382]
  • ISO 2456:1986 Surface active agents β€” Water used as a solvent for tests β€” Specification and test methods
  • ISO 2457:1976 Solid wood parquet β€” Classification of beech strips
  • ISO 2458:1975 End-suction centrifugal pumps (rating 16 bar) β€” Test Code [Rejected draft]
  • ISO 2460:1973 Sodium hydrogen carbonate for industrial use β€” Determination of iron content β€” 1,10- Phenanthroline photometric method
  • ISO 2461:1973 Sodium hydrogen carbonate for industrial use β€” Determination of matter insoluble in water
  • ISO 2462:1973 Sodium chlorate for industrial use β€” Determination of moisture content β€” Gravimetric method
  • ISO 2463:1973 Sodium chlorate for industrial use β€” Determination of chloride content β€” Mercurimetric method
  • ISO 2464:1973 Crude glycerine for industrial use β€” Calculation of Matter (Organic) Non-Glycerol (MONG) [Withdrawn without replacement]
  • ISO 2465:1973 Glycerols for industrial use β€” Determination of arsenic content β€” Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2466:1973 Potassium hydroxide for industrial use β€” Sampling β€” Test sample β€” Preparation of the main solution for carrying out certain determinations
  • ISO 2467:2004 Cinematography β€” Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints β€” Positions and dimensions
  • ISO 2469:2014 Paper, board and pulps β€” Measurement of diffuse radiance factor (diffuse reflectance factor)
  • ISO 2470 Paper, board and pulps β€” Measurement of diffuse blue reflectance factor
    • ISO 2470-1:2016 Part 1: Indoor daylight conditions (ISO brightness)
    • ISO 2470-2:2016 Part 2: Outdoor daylight conditions (D65 brightness)
  • ISO 2471:2008 Paper and board β€” Determination of opacity (paper backing) β€” Diffuse reflectance method
  • ISO 2472:1975 Ebonite β€” Determination of tensile strength and elongation at break [Withdrawn without replacement]
  • ISO 2473:1972 Ebonite β€” Determination of cross-breaking strength [Withdrawn without replacement]
  • ISO 2474:1972 Ebonite β€” Determination of crushing strength [Withdrawn without replacement]
  • ISO 2475:2011 Chloroprene rubber (CR) β€” General-purpose types β€” Evaluation procedure
  • ISO 2476:2014 Butadiene rubber (BR) β€” Solution-polymerized types β€” Evaluation procedures
  • ISO 2477:2005 Shaped insulating refractory products β€” Determination of permanent change in dimensions on heating
  • ISO 2478:1987 Dense shaped refractory products β€” Determination of permanent change in dimensions on heating
  • ISO 2479:1972 Sodium chloride for industrial use β€” Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
  • ISO 2480:1972 Sodium chloride for industrial use β€” Determination of sulphate content β€” Barium sulphate gravimetric method
  • ISO 2481:1973 Sodium chloride for industrial use β€” Determination of halogens, expressed as chlorine β€” Mercurimetric method
  • ISO 2482:1973 Sodium chloride for industrial use β€” Determination of calcium and magnesium contents β€” EDTA complexometric methods
  • ISO 2483:1973 Sodium chloride for industrial use β€” Determination of the loss of mass at 110 degrees C
  • ISO 2484:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Flame emission spectrophotometric method [Withdrawn without replacement]
  • ISO 2485:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
  • ISO 2486:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
  • ISO 2487:1973 Potassium sulphate for industrial use β€” Determination of sulphate content β€” Barium sulphate gravimetric method [Withdrawn without replacement]
  • ISO 2488:1973 Potassium sulphate for industrial use β€” Determination of chloride content β€” Mercurimetric method [Withdrawn without replacement]
  • ISO 2489:1973 Potassium sulphate for industrial use β€” Determination of acidity to methyl orange [Withdrawn without replacement]
  • ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module β€” Nominal dimensions
  • ISO 2491:1974 Thin parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
  • ISO 2492:1974 Thin taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
  • ISO 2493 Paper and board β€” Determination of bending resistance
    • ISO 2493-1:2010 Part 1: Constant rate of deflection
    • ISO 2493-2:2011 Part 2: Taber-type tester
  • ISO 2494:1974 Paper and board β€” Recommended procedure for the determination of roughness β€” Constant-pressure air-flow method [Withdrawn: replaced with ISO 8791-(2-3)]
  • ISO 2495:1995 Iron blue pigments β€” Specifications and methods of test
  • ISO 2496:1973 secButyl alcohol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2497:1973 Methyl ethyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2498:1974 Methyl ethyl ketone for industrial use β€” Examination for residual odour [Withdrawn without replacement]
  • ISO 2499:1974 isoButyl methyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]

ISO 2500 – ISO 2649

  • ISO 2500:1974 isoAmyl ethyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2501:1973 Methyl ethyl ketone, isobutyl methyl ketone and isoamyl ethyl ketone for industrial use β€” Determination of alcoholic impurities β€” Volumetric method [Withdrawn without replacement]
  • ISO 2502 Gas welding equipment β€” Safety code [Rejected draft] [5]
  • ISO 2503:2009 Gas welding equipment β€” Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
  • ISO 2504:1973 Radiography of welds and viewing conditions for films β€” Utilization of recommended patterns of image quality indicators (I.Q.I.) [Withdrawn without replacement]
  • ISO 2505:2005 Thermoplastics pipes β€” Longitudinal reversion β€” Test method and parameters
  • ISO 2506:1981 Polyethylene pipes (PE) β€” Longitudinal reversion β€” Test methods and specification [Withdrawn: replaced with ISO 2505]
  • ISO 2507 Thermoplastics pipes and fittings β€” Vicat softening temperature
    • ISO 2507-1:1995 Thermoplastics pipes and fittings β€” Vicat softening temperature β€” Part 1: General test method
    • ISO 2507-2:1995 Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
  • ISO 2508:1981 Unplasticized polyvinyl chloride (PVC) pipes β€” Water absorption β€” Determination and specification [Withdrawn without replacement]
  • ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles
  • ISO 2510:1989 Sound-reducing composition cork in tiles [Withdrawn without replacement]
  • ISO 2511:1974 Furfural for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2512:1974 Furfural for industrial use β€” Determination of total carbonyl compounds β€” Volumetric method [Withdrawn without replacement]
  • ISO 2513:1974 Acetaldehyde for industrial use β€” Determination of density at 15 degrees C [Withdrawn without replacement]
  • ISO 2514:1974 Acetaldehyde for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2515:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) β€” Determination of ammoniacal nitrogen content β€” Volumetric method after distillation [Withdrawn without replacement]
  • ISO 2516:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) β€” Determination of total alkalinity β€” Volumetric method [Withdrawn without replacement]
  • ISO 2517:1974 Diacetone alcohol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2518:1974 Diacetone alcohol and hexylene glycol for industrial use β€” Test for miscibility with water [Withdrawn without replacement]
  • ISO 2519:1974 Hexylene glycol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2520:1974 Tritolyl phosphate for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2521:1974 Tritolyl phosphate for industrial use β€” Determination of acidity to phenol red β€” Volumetric method [Withdrawn without replacement]
  • ISO 2522:1974 Tritolyl phosphate for industrial use β€” Determination of apparent free phenols content β€” Volumetric method [Withdrawn without replacement]
  • ISO 2523:1974 Adipate esters for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2524:1974 Adipate esters for industrial use β€” Measurement of colour after heat treatment [Withdrawn without replacement]
  • ISO 2525:1974 Adipate esters for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2526:1974 Adipate esters for industrial use β€” Determination of ash β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2527:1974 Adipate esters for industrial use β€” Determination of ester content β€” Volumetric method [Withdrawn without replacement]
  • ISO 2528:2017 Sheet materials β€” Determination of water vapour transmission rate (WVTR) β€” Gravimetric (dish) method
  • ISO 2529:1973 Aircraft β€” Zones, access doors and panels β€” Referencing system [Withdrawn without replacement]
  • ISO 2530:1975 Keyboard for international information processing interchange using the ISO 7- bit coded character set β€” Alphanumeric area [Withdrawn: replaced with ISO 9995-(1,7)]
  • ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
  • ISO 2532:1974 Steel wire ropes – Vocabulary
  • ISO 2533:1975 Standard Atmosphere
  • ISO 2534:2020 Road vehicles β€” Engine test code β€” Gross power
  • ISO 2535:2001 Plastics β€” Unsaturated-polyester resins β€” Measurement of gel time at ambient temperature
  • ISO 2536:1974 Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series β€” Dimensions of flanges [Withdrawn without replacement]
  • ISO 2537:2007 Hydrometry – Rotating-element current-meters
  • ISO 2538 Geometrical product specifications (GPS) – Wedges
    • ISO 2538-1:2014 Part 1: Series of angles and slopes
    • ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
  • ISO 2539:1974 Numerical control of machines β€” Punched tape variable block format for contouring and contouring/positioning [Withdrawn: replaced with ISO 6983-1]
  • ISO 2540:2016 Centre drills for centre holes with protecting chamfer β€” Type B
  • ISO 2541:2016 Centre drills for centre holes with radius form β€” Type R
  • ISO 2542:1980 Internal combustion engines β€” Spark plug ignition β€” Terminology [Withdrawn: replaced with ISO 6518-1]
  • ISO 2543:1973 Copper and copper alloys β€” Determination of manganese β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2544:1975 Textile machinery and accessories β€” Warping machinery β€” Preparation of warp for weaving β€” Vocabulary [Withdrawn without replacement]
  • ISO 2546:1973 Seamless plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
  • ISO 2547:1973 Welded plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
  • ISO 2548:1973 Centrifugal, mixed flow and axial pumps β€” Code for acceptance tests β€” Class C [Withdrawn: replaced with ISO 9906]
  • ISO 2549:1972 Textile floor coverings β€” Hand-knotted carpets β€” Determination of tuft leg length above the woven ground
  • ISO 2550:1972 Textile floor coverings β€” Hand-made carpets β€” Determination of types of knots
  • ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form β€” Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
  • ISO 2553:2019 Welding and allied processes – Symbolic representation on drawings – Welded joints
  • ISO 2554:1997 Plastics β€” Unsaturated polyester resins β€” Determination of hydroxyl value
  • ISO 2555:2018 Plastics β€” Resins in the liquid state or as emulsions or dispersions β€” Determination of apparent viscosity using a single cylinder type rotational viscometer method
  • ISO 2556:1974 Plastics β€” Determination of the gas transmission rate of films and thin sheets under atmospheric pressure β€” Manometric method [Withdrawn without replacement]
  • ISO 2557 Plastics β€” Amorphous thermoplastics β€” Preparation of test specimens with a specified maximum reversion
    • ISO 2557-1:1989 Part 1: Bars [Withdrawn without replacement]
    • ISO 2557-2:1986 Part 2: Plates [Withdrawn without replacement]
  • ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics β€” Determination of time of dissolution of the binder in styrene
  • ISO 2559:2011 Textile glass β€” Mats (made from chopped or continuous strands) β€” Designation and basis for specifications
  • ISO 2560:2020 Welding consumables β€” Covered electrodes for manual metal arc welding of non-alloy and fine grain steels β€” Classification
  • ISO 2561:2012 Plastics β€” Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO 2562:1973 Modular units for machine tool construction β€” Slide units
  • ISO 2563:2009 Aircraft ducting and piping β€” Profile dimensions for flanges of V-band couplings
  • ISO 2564 Conveyor chains, attachments and chain wheels β€” Part 2: Chain wheels [Draft renamed ISO 1977-2]
  • ISO 2565 Conveyor chains, attachments and chain wheels β€” Part 3: Attachments β€” Metric series [Draft renamed ISO 1977-3]
  • ISO 2566 Steel β€” Conversion of elongation values
    • ISO 2566-1:2021 Part 1: Carbon and low-alloy steels
    • ISO 2566-2:2021 Part 2: Austenitic steels
  • ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks
  • ISO 2569:1994 Cork stoppers β€” Vocabulary [Withdrawn without replacement]
  • ISO 2572:1982 Textile machinery and accessories β€” Card gauges
  • ISO 2573:1977 Tensile testing systems β€” Determination of K-value [Withdrawn without replacement]
  • ISO 2574:1994 Aircraft – Electrical cables – Identification marking
  • ISO 2575:2021 Road vehicles – Symbols for controls, indicators and tell-tales
  • ISO 2576:1972 Chemical analysis of zinc alloys β€” Polarographic determination of lead and cadmium in zinc alloys containing copper [Withdrawn without replacement]
  • ISO 2577:2007 Plastics β€” Thermosetting moulding materials β€” Determination of shrinkage
  • ISO 2578:1993 Plastics β€” Determination of time-temperature limits after prolonged exposure to heat
  • ISO 2579 Plastics β€” Instrumental evaluation of color difference [Rejected draft]
  • ISO 2580 Plastics β€” Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
    • ISO 2580-1:2002 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19062-1]
    • ISO 2580-2:2003 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19062-2]
  • ISO 2581:1975 Rigid cellular plastics β€” Determination of apparent thermal conductivity by means of a heat-flow meter [Withdrawn: replaced with ISO 8301]
  • ISO 2582:1978 Cork and cork products β€” Determination of thermal conductivity β€” Hot plate method [Withdrawn without replacement]
  • ISO 2583:1972 Tool shanks and equipment with 7/24 tapers β€” Collar dimensions [Withdrawn: replaced with ISO 297]
  • ISO 2584:2016 Cylindrical cutters with plain bore and key drive β€” Metric series
  • ISO 2585:1972 Slotting cutters with plain bore and key drive β€” Metric series
  • ISO 2586:1985 Shell end mills with plain bore and tenon drive β€” Metric series
  • ISO 2587:1972 Side and face milling cutters with plain bore and key drive β€” Metric series
  • ISO 2588:2014 Leather β€” Sampling β€” Number of items for a gross sample
  • ISO 2589:2016 Leather β€” Physical and mechanical tests β€” Determination of thickness
  • ISO 2590:1973 General method for the determination of arsenic β€” Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2591 Test sieving
    • ISO 2591-1:1988 Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
  • ISO 2592:2017 Petroleum and related products β€” Determination of flash and fire points β€” Cleveland open cup method
  • ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
  • ISO 2594:1972 Building drawings β€” Projection methods [Withdrawn: replaced with ISO 128-43]
  • ISO 2595:1973 Building drawings β€” Dimensioning of production drawings β€” Representation of manufacturing and work sizes [Withdrawn: replaced with ISO 129, now ISO 129-1]
  • ISO 2596:2006 Iron ores β€” Determination of hygroscopic moisture in analytical samples β€” Gravimetric, Karl Fischer and mass-loss methods
  • ISO 2597 Iron ores β€” Determination of total iron content
    • ISO 2597-1:2006 Part 1: Titrimetric method after tin(II) chloride reduction
    • ISO 2597-2:2019 Part 2: Titrimetric methods after titanium(III) chloride reduction
  • ISO 2598 Iron ores β€” Determination of silicon content
    • ISO 2598-1:1992 Part 1: Gravimetric methods
    • ISO 2598-2:1992 Part 2: Reduced molybdosilicate spectrophotometric method
  • ISO 2599:2003 Iron ores β€” Determination of phosphorus content β€” Titrimetric method
  • ISO 2600 Iron ores β€” Sampling β€” Incremental method [Rejected draft]
  • ISO 2601 Iron ores β€” Preparation of samples [Rejected draft]
  • ISO 2602:1980 Statistical interpretation of test results – Estimation of the mean – Confidence interval
  • ISO 2603:2016 Simultaneous interpreting β€” Permanent booths β€” Requirements
  • ISO 2604 Steel products for pressure purposes β€” Quality requirements
    • ISO 2604-1:1975 Part 1: Forgings [Withdrawn: replaced with ISO 9327-(1-5)]
    • ISO 2604-2:1975 Part 2: Wrought [Withdrawn: replaced with ISO 9329-(1-4)]
    • ISO 2604-3:1975 Part 3: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9330-(1-3)]
    • ISO 2604-4:1975 Part 4: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9328-(1-5)]
    • ISO 2604-5:1978 Part 5: Longitudinally welded austenitic stainless steel tubes [Withdrawn: replaced with ISO 9330-6]
    • ISO 2604-6:1978 Part 6: Submerged arc longitudinally or spirally welded steel tubes [Withdrawn: replaced with ISO 9330-1]
    • ISO/TR 2604-7:1986 Part 7: Carbon steel plate (thicknesses over 100 to 250 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
    • ISO 2604-8:1985 Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
  • ISO 2605 Steel products for pressure purposes β€” Derivation and verification of elevated temperature properties [Original draft renamed ISO 2604-2]
    • ISO 2605-1:1976 Part 1: Yield or proof stress of carbon and low alloy steel products [Withdrawn without replacement]
    • ISO 2605-2:1976 Part 2: Proof stress of austenitic steel products [Withdrawn without replacement]
    • ISO 2605-3:1985 Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
  • ISO 2606 [Draft renamed ISO 2604-3]
  • ISO 2607 [Draft renamed ISO 2604-4]
  • ISO 2608 Carbon and low-alloy steels β€” procedure for deriving minimum proof stress values
  • ISO 2624:1990 Copper and copper alloys β€” Estimation of average grain size
  • ISO 2625:1973 Copper and copper alloys β€” Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
  • ISO 2626:1973 Copper β€” Hydrogen embrittlement test
  • ISO 2627:1973 Copper and copper alloys β€” Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
  • ISO 2628:1973 Basic mode control procedures – Complements
  • ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
  • ISO/TR 2630:1978 Rubbers, raw β€” Sampling for inspection by variables [Withdrawn: replaced with ISO 1795]
  • ISO 2631 Mechanical vibration and shock β€” Evaluation of human exposure to whole-body vibration
    • ISO 2631-1:1997 Part 1: General requirements
    • ISO 2631-2:2003 Part 2: Vibration in buildings (1 Hz to 80 Hz)
    • ISO 2631-3:1985 Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz [Withdrawn: replaced with ISO 2631-1]
    • ISO 2631-4:2001 Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
    • ISO 2631-5:2018 Part 5: Method for evaluation of vibration containing multiple shocks
  • ISO 2632 Roughness comparison specimens
    • ISO 2632-1:1985 Part 1: Turned, ground, bored, milled, shaped and planed [Withdrawn without replacement]
    • ISO 2632-2:1985 Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished [Withdrawn without replacement]
    • ISO 2632-3:1979 Part 3: Cast surfaces [Withdrawn without replacement]
  • ISO 2633:1974 Determination of imposed floor loads in production buildings and warehouses [Withdrawn without replacement]
  • ISO 2634 Current codes for designing reinforcements of openings [Rejected draft] [6]
  • ISO 2635:2003 Aircraft β€” Conductors for general purpose aircraft electrical cables and aerospace applications β€” Dimensions and characteristics
  • ISO 2636:1973 Information processing β€” Conventions for incorporating flowchart symbols in flowcharts [Withdrawn: replaced with ISO 5807]
  • ISO 2637:1973 Aluminium and its alloys β€” Determination of zinc β€” Atomic absorption method [Withdrawn: replaced with ISO 5194]
  • ISO 2638 Liquid flow measurement in open channels β€” Dilution methods for the measurement of steady flow β€” Part 2: Integration method [Draft renamed ISO 555-2
  • ISO 2639:2002 Steels β€” Determination and verification of the depth of carburized and hardened cases [Withdrawn: replaced with ISO 18203]
  • ISO 2640 Commercial refrigerated cabinets β€” Methods of test β€” Defrosting test [Draft renamed ISO 1992-4]
  • ISO 2641 Commercial refrigerated cabinets β€” Methods of test β€” Water vapour condensation test [Draft renamed ISO 1992-5]
  • ISO 2642 Commercial refrigerated cabinets β€” Methods of test β€” Electrical energy consumption test [Draft renamed ISO 1992-6]
  • ISO 2643 Commercial refrigerated cabinets β€” Methods of test β€” Test for odour of material [Rejected draft]
  • ISO 2644:1975 Materials and equipment for petroleum and natural gas industries β€” Steel drill pipe for oil or natural gas wells [Withdrawn without replacement]
  • ISO 2645:1975 Materials and equipment for petroleum and natural gas industries β€” Casing and tubing for oil or natural gas wells [Withdrawn: replaced with ISO 11960]
  • ISO 2646:1974 Wool β€” Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
  • ISO 2647:2020 Wool β€” Determination of percentage of medullated fibres by the projection microscope
  • ISO 2648:2020 Wool β€” Determination of fibre length distribution parameters β€” Capacitance method
  • ISO 2649:1974 Wool β€” Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester [Withdrawn without replacement]

ISO 2650 – ISO 2999

  • ISO 2650:1974 Environmental tests for aircraft equipment – Part 1: Scope and applicability [Withdrawn: replaced with ISO 7137]
  • ISO 2651 Environmental tests for aircraft equipment – Part 2.1: Temperature, pressure and humidity [Rejected draft]
  • ISO 2652 Environmental tests for aircraft equipment – Part 2.2: Humidity (24 h cycle) [Rejected draft]
  • ISO 2653:1975 Environmental tests for aircraft equipment
    • ISO 2653-1:1975 β€” Part 1: Ice formation [Withdrawn: replaced with ISO 7137]
  • ISO 2655:1975 Environmental tests for aircraft equipment – Part 2.5: Waterproofness [Withdrawn: replaced with ISO 7137]
  • ISO 2657:1976 Environmental tests for aircraft equipment – Part 2.7: Change of temperature [Withdrawn: replaced with ISO 7137]
  • ISO 2658:1976 Environmental tests for aircraft equipment – Part 2.8: Mould growth [Withdrawn: replaced with ISO 7137]
  • ISO 2659 Environmental tests for aircraft equipment – Part 2.9: Salt mist [Rejected draft]
  • ISO 2663 Environmental tests for aircraft equipment – Part 2.13: Sealing tests [Rejected draft]
  • ISO 2668 Environmental tests for aircraft equipment – Part 3.1: Vibration [Rejected draft]
  • ISO 2669:1995 Environmental tests for aircraft equipment – Steady-state acceleration
  • ISO 2671:1982 Environmental tests for aircraft equipment – Part 3.4: Acoustic vibration
  • ISO 2676:1975 Environmental tests for aircraft equipment – Part 4.1: [Withdrawn: replaced with ISO 7137]
  • ISO 2678:1985 Environmental tests for aircraft equipment β€” Insulation resistance and high voltage tests for electrical equipment
  • ISO 2683 Environmental tests for aircraft equipment – Part 5.1: Explosion proofness [Rejected draft]
  • ISO 2684:1974 Environmental tests for aircraft equipment – Part 5.2: Fluid contamination [Withdrawn: replaced with ISO 7137]
  • ISO 2685:1998 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones
  • ISO 2690:1973 Unrecorded magnetic tapes for instrumentation applications β€” Physical properties and test methods [Withdrawn without replacement]
  • ISO 2691:1987 Photography β€” Expendable photoflash lamps (without integral reflector) β€” Definitions and requirements for luminous flux/time characteristics [Withdrawn without replacement]
  • ISO 2692:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
  • ISO 2694: Pressure Wessels [rejected draft]
  • ISO 2695:1976 Fibre building boards β€” Hard and medium boards for general purposes β€” Quality specifications β€” Appearance, shape and dimensional tolerances [Withdrawn without replacement]
  • ISO 2696:1976 Fibre building boards β€” Hard and medium boards for general purposes β€” Quality specifications β€” Water absorption and swelling in thickness [Withdrawn without replacement]
  • ISO 2697:1999 Diesel engines β€” Fuel nozzles β€” Size "S"
  • ISO 2698:2016 Diesel engines β€” Clamp-mounted fuel injectors, types 7 and 28
  • ISO 2699:1994 Diesel engines β€” Flange-mounted fuel injectors, size "S" β€” Types 2, 3, 4, 5 and 6
  • ISO 2700:1974 Road vehicles β€” Screw-mounted injection nozzle holders size "S" β€” Type 1 [Withdrawn without replacement]
  • ISO 2701:1977 Drawn wire for general purpose non-alloy steel wire ropes β€” Terms of acceptance [Withdrawn without replacement]
  • ISO 2702:1977 Heat-treated steel tapping screws β€” Mechanical properties
  • ISO 2703:1973 Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels β€” Metric series β€” Specification [Withdrawn without replacement]
  • ISO 2704:1998 Road vehicles β€” M10 x 1 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2705:2006 Road vehicles β€” M12 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2706 Micrographics β€” Transparent A6 size microfiche of uniform division β€” Image arrangement No. 1 [Draft merged into ISO 2707]
  • ISO 2707:1980 Micrographics β€” Transparent A6 size microfiche of uniform division β€” Image arrangements No. 1 and No. 2 [Withdrawn: replaced with ISO 9923]
  • ISO 2708:1980 Micrographics β€” Transparent A6 size microfiche of variable division β€” Image arrangements A and B [Withdrawn: replaced with ISO 9923]
  • ISO 2709:2008 Information and documentation – Format for information exchange
  • ISO 2710 Reciprocating internal combustion engines – Vocabulary
    • ISO 2710-1:2000 Part 1: Terms for engine design and operation
    • ISO 2710-2:1999 Part 2: Terms for engine maintenance
  • ISO 2711:1973 Information processing interchange – Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2712:1973 Copper and copper alloys β€” Rockwell superficial hardness test (N and T scales) [Withdrawn: replaced with ISO 1024]
  • ISO 2713:1973 Copper and copper alloys β€” Rockwell hardness test (B, F and G scales) [Withdrawn: replaced with ISO 6508]
  • ISO 2714:2017 Liquid hydrocarbons β€” Volumetric measurement by displacement meter
  • ISO 2715:2017 Liquid hydrocarbons β€” Volumetric measurement by turbine flowmeter
  • ISO 2716:1972 Freight containers β€” Coding and identification [Withdrawn: replaced with ISO 6346]
  • ISO 2717:1973 Sulphuric acid and oleum for industrial use β€” Determination of lead content β€” Dithizone photometric method [Withdrawn without replacement]
  • ISO 2718:1974 Standard layout for a method of chemical analysis by gas chromatography [Withdrawn without replacement]
  • ISO 2719:2016 Determination of flash point β€” Pensky-Martens closed cup method
  • ISO 2720:1974 Photography β€” General purpose photographic exposure meters (photoelectric type) β€” Guide to product specification
  • ISO 2721:2013 Photography β€” Film-based cameras β€” Automatic controls of exposure
  • ISO 2722:1997 Vitreous and porcelain enamels β€” Determination of resistance to citric acid at room temperature [Withdrawn: replaced with ISO 28706-1]
  • ISO 2723:1995 Vitreous and porcelain enamels for sheet steel β€” Production of specimens for testing [Withdrawn: replaced with ISO 28764]
  • ISO 2724:1973 Vitreous and porcelain enamels for cast iron β€” Production of specimens for testing [Withdrawn: replaced with ISO 28764]
  • ISO 2725 Assembly tools for screws and nuts β€” Square drive sockets
  • ISO 2725-1:2017 Part 1: Hand-operated sockets
  • ISO 2725-2:2017 Part 2: Machine-operated sockets ("impact")
  • ISO 2725-3:2017 Part 3: Machine-operated sockets ("non-impact")
  • ISO 2726:1995 Woodworking tools β€” Metal-bodied bench planes, plane cutters and cap irons [Withdrawn without replacement]
  • ISO 2727:1973 Modular units for machine tool construction β€” Headstocks
  • ISO 2728:1982 Woodworking tools β€” Plane irons [Withdrawn: replaced with ISO 2726]
  • ISO 2729:1995 Woodworking tools β€” Chisels and gouges
  • ISO 2730:1973 Woodworking tools β€” Wooden bodied planes [Withdrawn without replacement]
  • ISO 2731:1973 Dee shackles [Withdrawn: replaced with ISO 2415]
  • ISO 2732:1984 Steel and cast iron β€” Determination of phosphorus content β€” Phosphovanadomolybdate spectrophotometric method [Withdrawn: replaced with ISO 10714]
  • ISO 2733:1983 Vitreous and porcelain enamels β€” Apparatus for testing with acid and neutral liquids and their vapours [Withdrawn: replaced with ISO 28706-2]
  • ISO 2734:1997 Vitreous and porcelain enamels β€” Apparatus for testing with alkaline liquids [Withdrawn: replaced with ISO 28706-4]
  • ISO 2735:1973 Hermetically sealed metal food containers β€” Capacities and diameters of round open-top and vent hole cans for milk [Withdrawn: replaced with ISO 3004-6 (now replaced with ISO 10653 and 10654 and ISO/TR 11761, 11762, and 11776) and ISO/TR 8610]
  • ISO 2736 Concrete tests β€” Test specimens
    • ISO 2736-1 Part 1: Sampling of fresh concrete [Withdrawn: replaced with ISO 1920-1]
    • ISO 2736-2 Part 2: Making and curing of test specimens for strength tests [Withdrawn: replaced with ISO 1920-3]
  • ISO 2737:1973 Permeable sintered metal materials β€” Determination of oil content [Withdrawn: replaced with ISO 2738]
  • ISO 2738:1999 Sintered metal materials, excluding hardmetals β€” Permeable sintered metal materials β€” Determination of density, oil content and open porosity
  • ISO 2739:2012 Sintered metal bushings β€” Determination of radial crushing strength
  • ISO 2740:2009 Sintered metal materials, excluding hardmetals β€” Tensile test pieces
  • ISO 2741:1973 Zinc alloys β€” Complexometric determination of magnesium [Withdrawn without replacement]
  • ISO 2742:1998 Vitreous and porcelain enamels β€” Determination of resistance to boiling citric acid [Withdrawn: replaced with ISO 28706-2]
  • ISO 2743:1986 Vitreous and porcelain enamels β€” Determination of resistance to condensing hydrochloric acid vapour [Withdrawn: replaced with ISO 28706-2]
  • ISO 2744:1998 Vitreous and porcelain enamels β€” DDetermination of resistance to boiling water and water vapour [Withdrawn: replaced with ISO 28706-2]
  • ISO 2745:1998 Vitreous and porcelain enamels β€” Determination of resistance to hot sodium hydroxide [Withdrawn: replaced with ISO 28706-4]
  • ISO 2746:2015 Vitreous and porcelain enamels β€” High voltage test
  • ISO 2747:1998 Vitreous and porcelain enamels β€” Enamelled cooking utensils β€” Determination of resistance to thermal shock
  • ISO 2748:1983 Textile machinery and accessories β€” Lingoes for Jacquard weaving [Withdrawn without replacement]
  • ISO 2749:1973 Urea for industrial use β€” Measurement of the pH of a solution of urea of conventional concentration (100 g/L) β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2750:1974 Urea for industrial use β€” Measurement of colour in Hazen units (platinum-cobalt scale) of a urea-formaldehyde solution [Withdrawn without replacement]
  • ISO 2751:1973 Urea for industrial use β€” Determination of the buffer coefficient β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2752:1973 Urea for industrial use β€” Measurement of the variation of pH in the presence of formaldehyde β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2753:1973 Urea for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2754:1973 Urea for industrial use β€” Determination of biuret content β€” Photometric method [Withdrawn without replacement]
  • ISO 2755:1973 1,1,1- Trichloroethane for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2756:1973 Hexachlorobenzene for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2757:1973 1,2,4- Trichlorobenzene for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2758:2014 Paper β€” Determination of bursting strength
  • ISO 2759:2014 Board β€” Determination of bursting strength
  • ISO 2760:1975 Crude sodium borates for industrial use β€” Determination of total aluminium content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2761:1975 Crude sodium borates for industrial use β€” Determination of total titanium content β€” Photometric method [Withdrawn without replacement]
  • ISO 2762:1973 Hydrochloric acid for industrial use β€” Determination of soluble sulphates β€” Turbidimetric method
  • ISO 2763 Data processing β€” Vocabulary β€” Part 02: Mathematics and logic, arithmetic and logical operations [Draft merged into ISO 2382]
  • ISO 2764:1974 Terms and symbols for flight dynamics β€” Concepts, quantities and symbols used in the study of aircraft stability and control [Withdrawn: replaced with ISO 1151-4]
  • ISO 2765:1974 Flight dynamics β€” Concepts, quantities and symbols β€” Quantities used in measurements [Withdrawn: replaced with ISO 1151-5]
  • ISO 2766:1973 Single lifting hooks with shank β€” Capacity up to 25 tonnes β€” Grades M, P, S (T, V) β€” Hammer and drop forged hooks [Withdrawn without replacement]
  • ISO 2767:1973 Surface treatments of metals β€” Anodic oxidation of aluminium and its alloys β€” Specular reflectance at 45 degrees β€” Total reflectance β€” Image clarity [Withdrawn: replaced with ISO 10215 and ISO 10216]
  • ISO 2768 General tolerances
    • ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications [Withdrawn: replaced with ISO 22081]
  • ISO 2769:1973 Modular units for machine tool construction β€” Wing bases for slide units
  • ISO 2770:1974 Tapping screws according to ISO/R 1478 to 1483 β€” Minimum and maximum lengths [Withdrawn without replacement]
  • ISO 2771:1980 Iron ores β€” Determination of aluminium content β€” Oxine gravimetric and titrimetric methods [Withdrawn without replacement]
  • ISO 2772:2019 Test conditions for box type vertical drilling machines β€” Testing of the accuracy
  • ISO 2773 Test conditions for pillar type vertical drilling machines
    • ISO 2773-1:1973 Part 1: Geometrical tests
    • ISO 2773-2:1973 Part 2: Practical test
  • ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
  • ISO 2776:1974 Modular co-ordination β€” Co-ordinating sizes for doorsets β€” External and internal [Withdrawn without replacement]
  • ISO 2777:1974 Modular co-ordination β€” Co-ordinating sizes for rigid flat sheet boards used in building [Withdrawn without replacement]
  • ISO/TR 2778:1977 Wrought aluminium and aluminium alloys β€” Drawn tubes β€” Mechanical properties [Withdrawn: replaced with ISO 6363-2]
  • ISO 2779:1973 Aluminium machining alloys β€” Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg [Withdrawn: replaced with ISO 209-1]
  • ISO 2780:2018 Milling cutters with tenon drive β€” Interchangeability dimensions for cutter arbors β€” Metric series
  • ISO 2781:2018 Rubber, vulcanized or thermoplastic β€” Determination of density
  • ISO 2782 Rubber, vulcanized or thermoplastic β€” Determination of permeability to gases
    • ISO 2782-1:2016 Part 1: Differential-pressure methods
    • ISO 2782-2:2018 Part 2: Equal-pressure method
  • ISO 2783:1975 Ebonite β€” Determination of hardness by means of a durometer [Withdrawn without replacement]
  • ISO 2784:1974 Continuous forms used for information processing – Sizes and sprocket feed holes
  • ISO 2785:1986 Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure [Withdrawn without replacement]
  • ISO 2786 Modular co-ordination β€” Internal wood doorsets β€” Principal dimensions [Rejected draft]
  • ISO 2787:1984 Rotary and percussive pneumatic tools β€” Performance tests
  • ISO 2788:1986 Documentation – Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
  • ISO 2789:2013 Information and documentation – International library statistics
  • ISO 2790:2020 Belt drives β€” V-belts for the automotive industry and corresponding pulleys β€” Dimensions
  • ISO 2791:1973 Bow shackles [Withdrawn: replaced with ISO 2415]
  • ISO 2792 Dentistry – Vocabulary – Part 2 [Draft merged into ISO 1942]
  • ISO 2793 Dentistry – Vocabulary – Part 3 [Draft merged into ISO 1942]
  • ISO 2794 Dentistry – Vocabulary – Part 4 [Draft merged into ISO 1942]
  • ISO 2795:2020 Plain bearings β€” Sintered bushes β€” Dimensions and tolerances
  • ISO 2796:1986 Cellular plastics, rigid β€” Test for dimensional stability
  • ISO 2797:2017 Textile glass β€” Rovings β€” Basis for a specification
  • ISO 2798:1974 Plastics β€” Designation of copolymer resins of vinyl chloride [Withdrawn: replaced with ISO 1060-1]
  • ISO/TR 2799:1978 Cellular plastics β€” Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load [Withdrawn: replaced with ISO 7616]
  • ISO 2800:1973 Photography β€” Expendable photoflash lamps β€” Definition and evaluation of flashability [Withdrawn without replacement]
  • ISO/TR 2801:2007 Clothing for protection against heat and flame β€” General recommendations for selection, care and use of protective clothing
  • ISO 2802:1974 Textile machinery and accessories β€” Plastic travellers for spinning and twisting [Withdrawn: replaced with ISO 96-2]
  • ISO 2803:1974 Photography β€” Silver-gelatin type microfilms β€” Processing and storage for archival purposes [Withdrawn: replaced with ISO 4331 and ISO 4332 (both replaced with ISO 10602, now replaced with ISO 18901), and ISO 5466 (now replaced with ISO 18911)]
  • ISO 2804:1996 Wire, bar or tube drawing dies β€” As-sintered pellets of hardmetal (carbide) β€” Dimensions
  • ISO 2805 Transliteration of the alphabets of non-Slavic languages using Cyrillic characters [Rejected draft]
  • ISO 2806:1994 Industrial automation systems – Numerical control of machines – Vocabulary
  • ISO 2808:2019 Paints and varnishes β€” Determination of film thickness
  • ISO 2809:1976 Paints and varnishes β€” Determination of light fastness of paints for interior use [Withdrawn: replaced with ISO 11341, now replaced with ISO 16474-(1-2)]
  • ISO 2810:2020 Paints and varnishes β€” Natural weathering of coatings β€” Exposure and assessment
  • ISO 2811 Paints and varnishes β€” Determination of density
    • ISO 2811-1:2016 Part 1: Pycnometer method
    • ISO 2811-2:2011 Part 2: Immersed body (plummet) method
    • ISO 2811-3:2011 Part 3: Oscillation method
    • ISO 2811-4:2011 Part 4: Pressure cup method
  • ISO 2812 Paints and varnishes β€” Determination of resistance to liquids
    • ISO 2812-1:2017 Part 1: Immersion in liquids other than water
    • ISO 2812-2:2018 Part 2: Water immersion method
    • ISO 2812-3:2019 Part 3: Method using an absorbent medium
    • ISO 2812-4:2017 Part 4: Spotting methods
    • ISO 2812-5:2018 Part 5: Temperature-gradient oven method
  • ISO 2813:2014 Paints and varnishes β€” Determination of gloss value at 20Β°, 60Β° and 85Β°
  • ISO 2814:1973 Paints and varnishes β€” Comparison of contrast ratio (hiding power) of paints of the same type and colour [Withdrawn without replacement]
  • ISO 2815:2003 Paints and varnishes β€” Buchholz indentation test
  • ISO 2816:1973 Fundamental characteristics of a system of shoe sizing to be known as Mondopoint [Withdrawn: replaced with ISO 9407]
  • ISO 2817:1999 Tobacco and tobacco products β€” Determination of silicated residues insoluble in hydrochloric acid
  • ISO 2818:2018 Plastics β€” Preparation of test specimens by machining
  • ISO 2819:2017 Metallic coatings on metallic substrates β€” Electrodeposited and chemically deposited coatings β€” Review of methods available for testing adhesion
  • ISO 2820:1974 Leather β€” Raw hides of cattle and horses β€” Method of trim
  • ISO 2821:1974 Leather β€” Raw hides of cattle and horses β€” Preservation by stack salting
  • ISO 2822 Raw cattle hides and calf skins
    • ISO 2822-1:1998 Part 1: Descriptions of defects
  • ISO 2823 Statistics β€” Vocabulary and symbols β€” Third series [Rejected draft merged into ISO 3534]
  • ISO 2824 Symbolic designation of direction of closing and faces of doors, windows and shutters β€” Part 2 [Rejected draft]
  • ISO 2825:1981 Spices and condiments β€” Preparation of a ground sample for analysis
  • ISO 2826:1974 Apricots β€” Guide to cold storage
  • ISO 2827:1988 Photography β€” Electronic flash equipment β€” Determination of light output and performance
  • ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of fluorine content β€” Alizarin complexone and lanthanum chloride spectrophotometric method
  • ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of phosphorus content β€” Reduced phosphomolybdate spectrophotometric method
  • ISO 2830:1973 Cryolite, natural and artificial β€” Determination of aluminium content β€” Atomic absorption method
  • ISO 2831:1973 Sodium fluoride for industrial use β€” Determination of water-insoluble matter
  • ISO 2832:1973 Sodium fluoride for industrial use β€” Determination of moisture content
  • ISO 2833:1973 Sodium fluoride for industrial use β€” Determination of fluorine content β€” Modified Willard-Winter method
  • ISO 2834 Graphic technology β€” Laboratory preparation of test prints
  • ISO 2834-1:2020 Part 1: Paste inks
  • ISO 2834-2:2015 Part 2: Liquid printing inks
  • ISO 2834-3:2008 Part 3: Screen printing inks
  • ISO 2835:1974 Prints and printing inks β€” Assessment of light fastness [Withdrawn without replacement]
  • ISO 2836:2021 Graphic technology β€” Prints and printing inks β€” Assessment of resistance of prints to various agents
  • ISO 2837:1996 Graphic technology β€” Prints and printing inks β€” Assessment of resistance to solvents [Withdrawn: replaced with ISO 2836]
  • ISO 2838:1974 Prints and printing inks β€” Assessment of resistance to alkalis [Withdrawn: replaced with ISO 2836]
  • ISO 2839:1974 Prints and printing inks β€” Assessment of resistance to soaps [Withdrawn: replaced with ISO 2836]
  • ISO 2840:1974 Prints and printing inks β€” Assessment of resistance of prints to detergents [Withdrawn: replaced with ISO 2836]
  • ISO 2841:1974 Prints and printing inks β€” Assessment of resistance of prints to cheese [Withdrawn: replaced with ISO 2836]
  • ISO 2842:1974 Prints and printing inks β€” Assessment of resistance of prints to edible oils [Withdrawn: replaced with ISO 2836]
  • ISO 2843:1974 Prints and printing inks β€” Assessment of resistance of prints to impregnation by wax or paraffin wax [Withdrawn: replaced with ISO 2836]
  • ISO 2844:1974 Prints and printing inks β€” Assessment of resistance of prints to spices [Withdrawn: replaced with ISO 2836]
  • ISO 2845:1975 Set of printing inks for letterpress printing β€” Colorimetric characteristics [Withdrawn: replaced with ISO 2846-1]
  • ISO 2846 Graphic technology β€” Colour and transparency of printing ink sets for four-colour printing (originally Set of printing inks for offset printing β€” Colorimetric characteristics)
    • ISO 2846-1:2017 Part 1: Sheet-fed and heat-set web offset lithographic printing
    • ISO 2846-2:2007 Part 2: Coldset offset lithographic printing
  • ISO 2848:1984 Building construction – Modular coordination – Principles and rules
  • ISO 2849 Building construction – Modular coordination – Modules for vertical dimensions [Rejected draft]
  • ISO 2850:1973 Potassium sulphate for industrial use β€” Determination of loss of mass at 105 degrees C [Withdrawn without replacement]
  • ISO 2851:1993 Stainless steel bends and tees for the food industry [Withdrawn without replacement]
  • ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry [Withdrawn without replacement]
  • ISO 2853:1993 Stainless steel threaded couplings for the food industry [Withdrawn without replacement]
  • ISO 2854:1976 Statistical interpretation of data – Techniques of estimation and tests relating to means and variances
  • ISO 2855:1976 Radioactive materials β€” Packagings β€” Test for contents leakage and radiation leakage [Withdrawn without replacement]
  • ISO 2856:1981 Elastomers β€” General requirements for dynamic testing [Withdrawn: replaced with ISO 4664]
  • ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches β€” Manufacturing tolerances on the threaded portion
  • ISO 2858:1975 End-suction centrifugal pumps (rating 16 bar) β€” Designation, nominal duty point and dimensions
  • ISO 2859 Sampling procedures for inspection by attributes
    • ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-2:2020 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
    • ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
    • ISO 2859-4:2020 Part 4: Procedures for assessment of declared quality levels
    • ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes [Withdrawn: replaced with ISO 28590]
  • ISO 2860:1992 Earth-moving machinery β€” Minimum access dimensions
  • ISO 2861:2020 Vacuum technology β€” Dimensions of clamped-type quick-release couplings
  • ISO 2862:1974 Cinematography β€” Single-track magnetic sound record on 35 mm motion-picture films β€” Position and dimensions [Withdrawn without replacement]
  • ISO 2863:1973 Cinematography β€” Motion-picture camera cartridge, 8 mm Type S Model II β€” Run length of film β€” Dimensions and specifications [Withdrawn without replacement]
  • ISO 2864:1974 Interchangeable magnetic six-disk pack β€” Physical and magnetic characteristics [Withdrawn without replacement]
  • ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of boron content β€” Curcumin spectrophotometric method
  • ISO 2866:1974 Sulphur for industrial use β€” Determination of total carbon content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2867:2011 Earth-moving machinery β€” Access systems
  • ISO 2868:1973 Surface active agents β€” Detergents β€” Anionic-active matter stable to acid hydrolysis β€” Determination of trace amounts
  • ISO 2869:1973 Surface active agents β€” Detergents β€” Anionic-active matter hydrolyzable under alkaline conditions β€” Determination of hydrolyzable and non-hydrolyzable anionic-active matter
  • ISO 2870:2009 Surface active agents β€” Detergents β€” Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
  • ISO 2871 Surface active agents β€” Detergents β€” Determination of cationic-active matter content
    • ISO 2871-1:2010 Part 1: High-molecular-mass cationic-active matter
    • ISO 2871-2:2010 Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • ISO 2872:1985 Packaging β€” Complete, filled transport packages β€” Compression test [Withdrawn: replaced with ISO 12048]
  • ISO 2873:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Low pressure test
  • ISO 2874:1985 Packaging β€” Complete, filled transport packages β€” Stacking test using compression tester [Withdrawn: replaced with ISO 12048]
  • ISO 2875:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Water-spray test
  • ISO 2876:1985 Packaging β€” Complete, filled transport packages β€” Rolling test
  • ISO 2877:1974 Sulphuric acid for industrial use β€” Determination of chlorides content β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2878:2017 Rubber, vulcanized or thermoplastic β€” Antistatic and conductive products β€” Determination of electrical resistance
  • ISO 2879:1975 Glycerine for industrial use β€” Determination of glycerol content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2880 Determination of Sound Power Emitted by Sma 11 Noise Sources in Reverberation Rooms β€” Part 1: Broad Band Sources [Rejected draft]
  • ISO 2881:1992 Tobacco and tobacco products β€” Determination of alkaloid content β€” Spectrometric method
  • ISO 2882:1979 Rubber, vulcanized β€” Antistatic and conductive products for hospital use β€” Electrical resistance limits [Withdrawn without replacement]
  • ISO 2883:1980 Rubber, vulcanized β€” Antistatic and conductive products for industrial use β€” Electrical resistance limits [Withdrawn without replacement]
  • ISO 2884 Paints and varnishes β€” Determination of viscosity using rotary viscometers
    • ISO 2884-1:1999 Part 1: Cone-and-plate viscometer operated at a high rate of shear
    • ISO 2884-2:2003 Part 2: Disc or ball viscometer operated at a specified speed
  • ISO 2885:1973 Acetaldehyde for industrial use β€” Determination of total content of carbonyl compounds β€” Volumetric method [Withdrawn without replacement]
  • ISO 2886:1973 Acetaldehyde for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 2887:1973 secButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2888:1973 Furfural for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2889:2021 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
  • ISO 2890:1973 Road vehicles β€” Vacuum braking for caravans and light trailers [Withdrawn without replacement]
  • ISO 2891:1977 Modular units for machine tool construction β€” Centre bases and columns [Withdrawn without replacement]
  • ISO 2892:2007 Austenitic cast irons β€” Classification
  • ISO 2893 General Methods of Test for Pigments β€” Comparison of Ease of Dispersion (Oscillatory Shaking Method) [Rejected Draft]
  • ISO 2894:1980 Embossed credit cards β€” Specifications, numbering system and registration procedure [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
  • ISO 2895:1974 Cinematography β€” Screen luminance for review room projection of motion-picture film intended for indoor theatres [Withdrawn: replaced with ISO 2910]
  • ISO 2896:2001 Rigid cellular plastics β€” Determination of water absorption
  • ISO 2897:1976 Plastics β€” Designation of impact-resistant polystyrenes [Withdrawn without replacement]
  • ISO 2898 Plastics β€” Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials
    • ISO 2898-1:1996 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24023-1]
    • ISO 2898-2:2008 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24023-2]
  • ISO 2899:1974 Sulphuric acid and oleums for industrial use β€” Determination of ammoniacal nitrogen content β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2900:1973 Potassium Hydroxide for Industrial Use – Determination of Carbon Dioxide Content – Titrimetric Method [Withdrawn without replacement]
  • ISO 2901:2016 ISO metric trapezoidal screw threads β€” Basic and design profiles
  • ISO 2902:2016 ISO metric trapezoidal screw threads β€” General plan
  • ISO 2903:2016 ISO metric trapezoidal screw threads β€” Tolerances
  • ISO 2904:2020 ISO metric trapezoidal screw threads β€” Basic dimensions
  • ISO 2905:1985 Modular units for machine tool construction β€” Spindle noses and adjustable adaptors for multi-spindle heads
  • ISO 2906:2002 Cinematography β€” Image area produced by camera aperture on 35 mm motion-picture film β€” Position and dimensions
  • ISO 2907:2002 Cinematography β€” Maximum projectable image area on 35 mm motion-picture film β€” Position and dimensions
  • ISO 2908:1974 Petroleum waxes β€” Determination of oil content [Withdrawn without replacement]
  • ISO 2909:2002 Petroleum products β€” Calculation of viscosity index from kinematic viscosity
  • ISO 2910:2018 Cinematography β€” Screen luminance and chrominance for the projection of film motion pictures
  • ISO 2911:2004 Sweetened condensed milk β€” Determination of sucrose content β€” Polarimetric method
  • ISO 2912:1973 Modular units for machine tool construction β€” Multi-spindle heads β€” Casing and input drive shaft dimensions
  • ISO 2913:1975 Wool β€” Colorimetric determination of cystine plus cysteine in hydrolysates
  • ISO 2915:1975 Wool β€” Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry
  • ISO 2916:1975 Wool β€” Determination of alkali content
  • ISO 2917:1999 Meat and meat products β€” Measurement of pH β€” Reference method
  • ISO 2918:1975 Meat and meat products β€” Determination of nitrite content (Reference method)
  • ISO 2919:2012 Radiological protection β€” Sealed radioactive sources β€” General requirements and classification
  • ISO 2920:2004 Whey cheese β€” Determination of dry matter (Reference method)
  • ISO 2921:2019 Rubber, vulcanized β€” Determination of low-temperature characteristics β€” Temperature-retraction procedure (TR test)
  • ISO 2922:2020 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
  • ISO 2923:1996 Acoustics – Measurement of noise on board vessels
  • ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals β€” Interchangeability dimensions of the drive β€” Saw diameter range 224 to 2 240 mm
  • ISO 2925:1973 Aluminium fluoride for industrial use – Preparation and storage of test samples [Withdrawn without replacement]
  • ISO 2926:2013 Aluminium oxide used for the production of primary aluminium β€” Particle size analysis for the range 45 Β΅m to 150 Β΅m β€” Method using electroformed sieves
  • ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium β€” Sampling
  • ISO 2928:2021 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) β€” Specification
  • ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck β€” Specification
  • ISO 2930:2017 Rubber, raw natural β€” Determination of plasticity retention index (PRI)
  • ISO 2931:2017 Anodizing of aluminium and its alloys β€” Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
  • ISO 2932:1981 Anodizing of aluminium and its alloys β€” Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution [Withdrawn without replacement]
  • ISO 2933:1974 Bonded abrasive products β€” Grinding wheel dimensions (Part 3) [Withdrawn: replaced with ISO 603-(1-16)]
  • ISO 2934:1973 Modular units for machine tool construction β€” Wing base for columns
  • ISO 2935:1974 Circular saw blades for woodworking β€” Dimensions
  • ISO 2936:2014 Assembly tools for screws and nuts β€” Hexagon socket screw keys
  • ISO 2937:1974 Plain end seamless steel tubes for mechanical application [Withdrawn without replacement]
  • ISO 2938:1974 Hollow steel bars for machining [Withdrawn without replacement]
  • ISO 2939:2015 Cinematography β€” Picture image area on 35 mm motion-picture release prints β€” Position and dimensions and analogue and digital photographic sound to picture record displacement
  • ISO 2940 Milling cutters mounted on centring arbors having a 7/24 taper
    • ISO 2940-1:1974 Fitting dimensions β€” Centring arbors
    • ISO 2940-2:1974 Inserted tooth cutters
  • ISO 2941:2009 Hydraulic fluid power β€” Filter elements β€” Verification of collapse/burst pressure rating
  • ISO 2942:2018 Hydraulic fluid power β€” Filter elements β€” Verification of fabrication integrity and determination of the first bubble point
  • ISO 2943:1998 Hydraulic fluid power β€” Filter elements β€” Verification of material compatibility with fluids
  • ISO 2944:2000 Fluid power systems and components β€” Nominal pressures
  • ISO 2945 Bases for the design of structures [Rejected draft, but partly covered by ISO 4356]
  • ISO 2946 Acoustics β€” Determination of sound power levels of noise sources β€” Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Draft renamed ISO 3742]
  • ISO 2947:1973 Textiles β€” Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System
  • ISO 2948 Brown coals and lignites β€” Extensive method of analysis of ash [Rejected draft]
  • ISO 2949 Brown coals and lignites β€” Analysis of ash [Rejected draft]
  • ISO 2950:1974 Brown coals and lignites β€” Classification by types on the basis of total moisture content and tar yield
  • ISO 2951:2019 Rubber, vulcanized rubber β€” Determination of insulation resistance
  • ISO 2953:1999 Mechanical vibration β€” Balancing machines β€” Description and evaluation [Withdrawn: replaced with ISO 21940-21]
  • ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
  • ISO 2955:1983 Information processing β€” Representation of SI and other units in systems with limited character sets [Withdrawn without replacement]
  • ISO 2958:1973 Road vehicles β€” Exterior protection for passenger cars
  • ISO 2959:2011 Textiles β€” Woven fabric descriptions
  • ISO 2960:1974 Textiles β€” Determination of bursting strength and bursting distension β€” Diaphragm method [Withdrawn: replaced with ISO 13938-1]
  • ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium β€” Determination of an adsorption index
  • ISO 2962:2010 Cheese and processed cheese products β€” Determination of total phosphorus content β€” Molecular absorption spectrometric method
  • ISO/TS 2963:2006 Cheese and processed cheese products β€” Determination of citric acid content β€” Enzymatic method
  • ISO 2964:1985 Aerospace β€” Tubing β€” Outside diameters and thicknesses β€” Metric dimensions
  • ISO 2965:2019 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability β€” Determination of air permeability
  • ISO 2966:1988 Cinematography β€” 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) β€” Cutting and perforating dimensions [Withdrawn without replacement]
  • ISO 2967:1982 Cinematography β€” Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0) β€” Positions and width dimensions [Withdrawn without replacement]
  • ISO 2968:1981 Cinematography β€” Recorded characteristics for magnetic sound record on 8 mm Type S motion- picture prints and full-coat magnetic film perforated 8 mm Type S β€” Specifications [Withdrawn without replacement]
  • ISO 2969:2015 Cinematography β€” B-chain electro-acoustic response of motion-picture control rooms and indoor theatres β€” Specifications and measurements
  • ISO 2970:1974 Cheese β€” determination of chloride content [Withdrawn without replacement]
  • ISO 2971:2013 Cigarettes and filter rods β€” Determination of nominal diameter β€” Method using a non-contact optical measuring apparatus
  • ISO 2972:1979 Numerical control of machines – Symbols
  • ISO 2973 Freight containers [Rejected Draft[
  • ISO 2974:2018 Diesel engines β€” 60Β° female cones for high-pressure fuel injection components
  • ISO 2975 Measurement of water flow in closed conduits – Tracer methods
    • ISO 2975-1:1974 Part 1: General
    • ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
    • ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
    • ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
    • ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
  • ISO 2976:2005 Coated abrasives β€” Abrasive belts β€” Selection of width/length combinations
  • ISO 2977:1997 Petroleum products and hydrocarbon solvents β€” Determination of aniline point and mixed aniline point
  • ISO 2979 Aircraft β€” Design of intermodal containers [Rejected draft]
  • ISO 2982 Rolling bearings β€” Accessories
    • ISO 2982-1:2013 Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
    • ISO 2982-2:2013 Part 2: Dimensions for locknuts and locking devices
  • ISO 2983:1975 Rolling bearings β€” Locknuts, wide series, and lockwashers with bent inner tab [Withdrawn without replacement]
  • ISO 2990:1974 Nitric acid for industrial use β€” Evaluation of the nitric acid concentration by measurement of density [Withdrawn without replacement]
  • ISO 2991:1974 Nitric acid for industrial use β€” Determination of ammoniacal nitrogen content β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2992:1974 Ammonium sulphate for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method
  • ISO 2993:1974 Ammonium sulphate for industrial use β€” Determination of free acidity β€” Titrimetric method
  • ISO 2994:1974 Ammonium sulphate for industrial use β€” Determination of matter insoluble in water β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2995:1974 Ammonium nitrate for industrial use β€” Determination of matter insoluble in water β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2996:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use β€” Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
  • ISO 2997:1974 Phosphoric acid for industrial use β€” Determination of sulphate content β€” Method by reduction and titrimetry
  • ISO 2998:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use β€” Determination of orthophosphate content β€” Photometric method using the reduced molybdophosphate [Withdrawn without replacement]
  • ISO 2999:1974 Sodium pyrophosphate for industrial use β€” Estimation of pyrophosphate content β€” Potentiometric method [Withdrawn without replacement]

See also

Notes

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".

References

  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
  3. ^ Mechanical Engineering. The Journal of the American Society of Mechanical Engineers (1975) Vol. 97. pg. 78
  4. ^ Der Praktiker, Volumes 30-31 (1978). Deutscher Verband fΓΌr Schweisstechnik. pg. 209.
  5. ^ Welding Research Abroad (1975). Welding Research Council (U.S.). pg. 20.

External links

From Wikipedia, the free encyclopedia

This is a list of published [Note 1] International Organization for Standardization (ISO) standards and other deliverables. [Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. [1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 ( JTC 1) have been made freely and publicly available. [2]

ISO 2000 – ISO 2299

  • ISO 2000:2020 Rubber, raw natural β€” Guidelines for the specification of technically specified rubber (TSR)
  • ISO 2002:1975 Raw styrene-butadiene rubber (SBR) β€” Determination of organic acid content [Withdrawn: replaced with ISO 7781]
  • ISO 2003:1975 Raw styrene-butadiene rubber (SBR) β€” Determination of soap content [Withdrawn: replaced with ISO 7781]
  • ISO 2004:2017 Natural rubber latex concentrate β€” Centrifuged or creamed, ammonia-preserved types β€” Specifications
  • ISO 2005:2014 Rubber latex, natural, concentrate β€” Determination of sludge content
  • ISO 2006 Rubber latex, synthetic β€” Determination of mechanical stability
    • ISO 2006-1:2009 Part 1: High-speed method
    • ISO 2006-1:2009 Part 2: Moderate-speed method under load
  • ISO 2007:2018 Rubber, unvulcanized β€” Determination of plasticity β€” Rapid-plastimeter method
  • ISO 2008:1987 Rubber latex, styrene-butadiene β€” Determination of volatile unsaturates [Withdrawn without replacement]
  • ISO 2009:2011 Slotted countersunk flat head screws β€” Product grade A
  • ISO 2010:2011 Slotted raised countersunk head screws β€” Product grade A
  • ISO 2011 Nuclear energy β€” Vocabulary β€” second list [draft incorporated into ISO 921] [3]
  • ISO 2012:1976 Textile machinery and accessories β€” Cone sectional warping machines β€” Maximum usable width
  • ISO 2013:1983 Textile machinery and accessories β€” Beams β€” Method of measuring variations of form and position [Withdrawn: replaced with ISO 8116-8]
  • ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2016:1981 Capillary solder fittings for copper tubes β€” Assembly dimensions and tests
  • ISO 2017 Mechanical vibration and shock – Resilient mounting systems
    • ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
    • ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
    • ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
  • ISO 2020 Aerospace β€” Preformed flexible steel wire rope for aircraft controls
    • ISO 2020-1:1997 Part 1: Dimensions and loads
    • ISO 2020-2:1997 Part 2: Technical specification
  • ISO 2021:1975 Data processing β€” Implementation of the ISO 8- bit coded character sets on punched cards [Withdrawn: replaced with ISO 6586]
  • ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
  • ISO 2023:1994 Rubber footwear β€” Lined industrial vulcanized-rubber boots β€” Specification [Withdrawn: replaced with ISO 20344]
  • ISO 2024:1981 Rubber footwear, lined conducting β€” Specification [Withdrawn without replacement]
  • ISO 2025:1972 Lined industrial rubber boots with general purpose oil resistance [Withdrawn without replacement]
  • ISO 2026:2020 Aircraft β€” Connections for starting engines by air
  • ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved β€” Specification
  • ISO 2028:2015 Synthetic rubber latex β€” Preparation of dry polymer
  • ISO 2030:2018 Granulated cork β€” Size analysis by mechanical sieving
  • ISO 2031:2015 Granulated cork β€” Determination of apparent bulk density
  • ISO 2032:1973 Heat-resisting equipment wires for aircraft
  • ISO 2033:1983 Information processing – Coding of machine readable characters (MICR and OCR)
  • ISO 2035:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure β€” Pressure-resistance test [Withdrawn without replacement]
  • ISO 2036:1976 Wood for manufacture of wood flooring β€” Symbols for marking according to species
  • ISO 2037:1992 Stainless steel tubes for the food industry [Withdrawn without replacement]
  • ISO 2039 Plastics β€” Determination of hardness
    • ISO 2039-1:2001 Part 1: Ball indentation method
    • ISO 2039-2:1987 Part 2: Rockwell hardness
    • ISO 2040:1972 Strontium chromate pigments for paints
  • ISO 2041:2009 Mechanical vibration, shock and condition monitoring – Vocabulary
  • ISO 2042:1973 Aircraft electrical circuit diagrams
  • ISO 2043:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure β€” Oven test [Withdrawn: replaced with ISO 580]
  • ISO 2044:1974 Unplasticized polyvinyl chloride (PVC) moulded solvent-welded socket fittings for use with pressure pipe β€” Hydraulic internal pressure test
  • ISO 2045:1988 Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints β€” Minimum depths of engagement [Withdrawn: replaced with ISO 1452-(2,3)]
  • ISO 2046:1973 Gaseous breathing oxygen supplies for aircraft
  • ISO 2047:1975 Information processing – Graphical representations for the control characters of the 7- bit coded character set
  • ISO 2048:1990 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints β€” Minimum depths of engagement [Withdrawn: replaced with ISO 1452-3]
  • ISO 2049:1996 Petroleum products β€” Determination of colour (ASTM scale)
  • ISO 2050:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Flame emission spectrophotometric method [Withdrawn without replacement]
  • ISO 2051:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Potassium tetraphenylborate gravimetric method [Withdrawn without replacement]
  • ISO 2052:1976 Potassium chloride for industrial use β€” Determination of potassium content β€” Sodium tetraphenylborate titrimetric method [Withdrawn without replacement]
  • ISO 2053:1976 Potassium chloride for industrial use β€” Determination of moisture content β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2056:1976 Moulded polyvinyl chloride (PVC) pipes and fittings β€” Determination of Vicat softening temperature [Withdrawn: replaced with ISO 2507, now ISO 2507-(1-2)]
  • ISO 2057:1981 Agricultural tractors β€” Remote control hydraulic cylinders for trailed implements
  • ISO 2058:1973 Raw styrene butadiene rubber (SBR) β€” Determination of volatile matter [Withdrawn: replaced with ISO 248]
  • ISO 2059: Concrete and reinforced concrete β€” notation [Rejected draft] [3]
  • ISO 2060:1994 Textiles β€” Yarn from packages β€” Determination of linear density (mass per unit length) by the skein method
  • ISO 2061:2015 Textiles β€” Determination of twist in yarns β€” Direct counting method
  • ISO 2062:2009 Textiles β€” Yarns from packages β€” Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
  • ISO 2063 Thermal spraying β€” Zinc, aluminium and their alloys
    • ISO 2063-1:2019 Part 1: Design considerations and quality requirements for corrosion protection systems
    • ISO 2063-2:2017 Part 2: Execution of corrosion protection systems
  • ISO 2064:1996 Metallic and other inorganic coatings β€” Definitions and conventions concerning the measurement of thickness
  • ISO 2065:1972 Textile machinery and accessories β€” Cylindrical tubes for tape yarns [Withdrawn: replaced with ISO 3914-3]
  • ISO 2066:2004 Resilient floor coverings β€” Determination of moisture content of agglomerated composition cork
  • ISO 2067:2019 Granulated cork, broken cork and crushed cork β€” Sampling for the determination of moisture content
  • ISO 2068:1972 Barium chromate pigments for paints
  • ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium β€” Determination of calcium content β€” Flame atomic absorption method [Withdrawn without replacement]
  • ISO 2070:1997 Aluminium oxide primarily used for the production of aluminium β€” Determination of calcium content [Withdrawn without replacement]
  • ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium β€” Determination of zinc content β€” Flame atomic absorption method [Withdrawn without replacement]
  • ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium β€” Determination of zinc content β€” PAN photometric method [Withdrawn without replacement]
  • ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium β€” Preparation of solution for analysis β€” Method by hydrochloric acid attack under pressure [Withdrawn without replacement]
  • ISO 2074:2007 Plywood – Vocabulary
  • ISO 2075:1972 Cutting netting to shape β€” Determination of the cutting rate [Withdrawn without replacement]
  • ISO 2076:2021 Textiles – Man-made fibres – Generic names
  • ISO 2077:1979 Pure expanded corkboard β€” Determination of the modulus of rupture by bending [Withdrawn without replacement]
  • ISO 2078:1993 Textile glass β€” Yarns β€” Designation
  • ISO 2079:1981 Surface treatment and metallic coatings β€” General classification of terms [Withdrawn: replaced with ISO 2080]
  • ISO 2080:2022 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary
  • ISO 2081:2018 Metallic and other inorganic coatings β€” Electroplated coatings of zinc with supplementary treatments on iron or steel
  • ISO 2082:2017 Metallic and other inorganic coatings β€” Electroplated coatings of cadmium with supplementary treatments on iron or steel
  • ISO 2083:1973 Gasoline β€” Determination of lead content β€” Volumetric chromate method [Withdrawn without replacement]
  • ISO 2084:1974 Pipeline flanges for general use β€” Metric series β€” Mating dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2085:2018 Anodizing of aluminium and its alloys β€” Check for continuity of thin anodic oxidation coatings β€” Copper sulfate test
  • ISO/R 2091:1971 Hydraulic cylinders β€” Internal diameters and piston rod diameters β€” Metric series [Withdrawn without replacement]
  • ISO 2092:1981 Light metals and their alloys β€” Code of designation based on chemical symbols [Withdrawn without replacement]
  • ISO 2093:1986 Electroplated coatings of tin β€” Specification and test methods
  • ISO 2094:1999 Textile floor coverings β€” Determination of thickness loss under dynamic loading
  • ISO 2095:1977 Textile floor coverings β€” Determination of mass of effective pile per unit area that can be shorn away from the substrate [Withdrawn: replaced with ISO 8543]
  • ISO 2096:1972 Glycerols for industrial use β€” Methods of sampling
  • ISO 2097:1972 Glycerols for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2098:1972 Glycerols for industrial use β€” Determination of ash β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2099:1972 Purified glycerol for industrial use β€” Determination of density at 20 degrees C [Withdrawn without replacement]
  • ISO 2100:1987 Aircraft β€” Electrical connectors β€” Tests
  • ISO/R 2101:1971 Aluminium and aluminium alloys β€” Shear test for rivet wire and rivets [Withdrawn without replacement]
  • ISO 2103:1986 Loads due to use and occupancy in residential and public buildings [Withdrawn without replacement]
  • ISO/R 2105:1971 Textile machinery and accessories β€” Tubes for draw-winders for man-made fibres [Withdrawn: replaced with ISO 3914-3]
  • ISO 2106:2019 Anodizing of aluminium and its alloys β€” Determination of mass per unit area (surface density) of anodic oxidation coatings β€” Gravimetric method
  • ISO 2107:2007 Aluminium and aluminium alloys β€” Wrought products β€” Temper designations
  • ISO 2108:2005 Information and documentation – International standard book number (ISBN)
  • ISO 2109:1975 Continuous mechanical handling equipment β€” Light duty belt conveyors for loose bulk materials
  • ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
  • ISO 2111:1985 Data communication β€” Basic mode control procedures β€” Code independent information transfer [Withdrawn without replacement]
  • ISO 2112:1990 Plastics β€” Aminoplastic moulding materials β€” Specification [Withdrawn: replaced with ISO 14527-(1-3) and ISO 14528-(1-3)]
  • ISO 2113:1996 Reinforcement fibres β€” Woven fabrics β€” Basis for a specification
  • ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) β€” Determination of partial acid value and total acid value
  • ISO 2115:1996 Plastics β€” Polymer dispersions β€” Determination of white point temperature and minimum film-forming temperature
  • ISO 2117 Terms and symbols for flight dynamics β€” Part 1: aircraft motion relative to the air [Draft renamed ISO 1151-1]
  • ISO 2119:1972 Magnesium-zinc-zirconium alloy castings β€” Chemical composition [Withdrawn: replaced with ISO 3115]
  • ISO 2120:1972 Liquid chlorine for industrial use β€” Determination of the content of chlorine by volume in the vaporized product
  • ISO 2121:1972 Liquid chlorine for industrial use β€” Determination of water content β€” Gravimetric method
  • ISO 2122:1972 Sodium and potassium silicates for industrial use β€” Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
  • ISO 2123:1972 Sodium and potassium silicates for industrial use β€” Determination of dynamic viscosity [Withdrawn without replacement]
  • ISO 2124:1972 Sodium and potassium silicates for industrial use β€” Determination of silica content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2125:1975 Continuous mechanical handling equipment for loose bulk materials β€” Vibrating feeders and conveyors, shaking or reciprocating feeders and oscillating conveyors β€” Safety code [Withdrawn: replaced with ISO 8456]
  • ISO 2126:1975 Office machines β€” Basic arrangement for the alphanumeric section of keyboards operated with both hands [Withdrawn: replaced with ISO 9995-(1,7)]
  • ISO 2128:2010 Anodizing of aluminium and its alloys β€” Determination of thickness of anodic oxidation coatings β€” Non-destructive measurement by split-beam microscope
  • ISO 2131:1972 Surface active agents β€” Simplified classification
  • ISO 2132:1972 Offset duplicators β€” Attachment features of plates [Withdrawn without replacement]
  • ISO 2133:1976 Stencils for duplicators β€” Minimum overprint and attachment features [Withdrawn without replacement]
  • ISO 2135:2017 Anodizing of aluminium and its alloys β€” Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
  • ISO/TR 2136:1977 Wrought aluminium and aluminium alloys β€” Rolled products β€” Mechanical properties [Withdrawn: replaced with ISO 6361-2]
  • ISO 2137:2020 Petroleum products and lubricants β€” Determination of cone penetration of lubricating greases and petrolatum [Withdrawn without replacement]
  • ISO 2139:1975 Continuous mechanical handling equipment for loose bulk materials β€” Oscillating conveyors and shaking or reciprocating feeders with tubular trough
  • ISO 2140:1975 Continuous mechanical handling equipment for loose bulk materials β€” Apron conveyors
  • ISO 2141:1972 Lifting hooks β€” General characteristics [Withdrawn without replacement]
  • ISO 2142:1981 Wrought aluminium, magnesium and their alloys β€” Selection of specimens and test pieces for mechanical testing
  • ISO 2143:2017 Anodizing of aluminium and its alloys β€” Estimation of loss of absorptive power of anodic oxidation coatings after sealing β€” Dye-spot test with prior acid treatment
  • ISO 2144:2019 Paper, board, pulps and cellulose nanomaterials β€” Determination of residue (ash content) on ignition at 900 Β°C
  • ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
  • ISO 2146:2010 Information and documentation – Registry services for libraries and related organizations
  • ISO/R 2147:1971 Aluminium alloys β€” Sand cast test pieces β€” Mechanical properties [Withdrawn: replaced with ISO 3522]
  • ISO 2148:1974 Continuous handling equipment – Nomenclature
  • ISO 2149:1975 Continuous mechanical handling equipment for unit loads β€” Overhead monorail chain conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2150:1975 Continuous mechanical handling equipment for unit loads β€” Overhead twin rail chain conveyors (power and free) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
  • ISO 2155:1974 Aircraft β€” Fire-resisting electrical cables β€” Performance requirements
  • ISO 2156:1974 Aircraft β€” Fire-resisting electrical cables β€” Methods of test
  • ISO 2157:2016 Dentistry β€” Nominal diameters and designation code numbers for rotary instruments
  • ISO 2160:1998 Petroleum products β€” Corrosiveness to copper β€” Copper strip test
  • ISO 2161 UNJ threads for Aerospace-Inch Series [Rejected draft] [4]
  • ISO 2162 Technical product documentation – Springs
    • ISO 2162-1:1993 Part 1: Simplified representation
    • ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
    • ISO 2162-3:1993 Part 3: Vocabulary [Withdrawn: replaced with ISO 26909]
  • ISO 2163:1975 Industrial trucks β€” Wheels and castors β€” Vocabulary [Withdrawn: replaced with ISO 22877]
  • ISO 2164:1975 Pulses β€” Determination of glycosidic hydrocyanic acid
  • ISO 2165:1974 Ware potatoes β€” Guide to storage
  • ISO 2166:1981 Carrots β€” Guide to storage
  • ISO 2167:1991 Round-headed cabbage β€” Guide to cold storage and refrigerated transport
  • ISO 2168:1974 Table grapes β€” Guide to cold storage
  • ISO 2169:1981 Fruits and vegetables β€” Physical conditions in cold stores β€” Definitions and measurement
  • ISO 2170:1980 Cereals and pulses β€” Sampling of milled products [Withdrawn: replaced with ISO 13690, later ISO 24333]
  • ISO 2171:2007 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2172:1983 Fruit juice β€” Determination of soluble solids content β€” Pycnometric method
  • ISO 2173:2003 Fruit and vegetable products β€” Determination of soluble solids β€” Refractometric method
  • ISO 2174:1990 Surface active agents β€” Preparation of water with known calcium hardness
  • ISO 2175:1981 Industrial wheels for non-powered equipment β€” Dimensions and nominal load capacities [Withdrawn: replaced with ISO 22883 and ISO 22884]
  • ISO 2176:1995 Petroleum products β€” Lubricating grease β€” Determination of dropping point
  • ISO 2177:2003 Metallic coatings β€” Measurement of coating thickness β€” Coulometric method by anodic dissolution
  • ISO 2178:2016 Non-magnetic coatings on magnetic substrates β€” Measurement of coating thickness β€” Magnetic method
  • ISO 2179:1986 Electroplated coatings of tin-nickel alloy β€” Specification and test methods
  • ISO 2182 Tests for colour fastness of textiles – Sixth series [Draft renamed ISO/R 105-6]
  • ISO 2184 Industrial castors β€” Dimensions of top plates
  • ISO 2184-1:1972 Part 1: Oblong top-plates with 4 bolt holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
  • ISO 2185:1972 Muscovite mica blocks, thins and films β€” Visual classification [Withdrawn without replacement]
  • ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
  • ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
  • ISO 2189:1986 Expanded pure agglomerated cork β€” Determination of bulk density [Withdrawn without replacement]
  • ISO 2190:2016 Granulated cork β€” Determination of moisture content
  • ISO 2191:1972 Cork β€” Expanded pure agglomerated β€” Deformation under constant pressure [Withdrawn without replacement]
  • ISO 2192:1984 Petroleum products β€” Determination of total sulfur content β€” Lamp method [Withdrawn without replacement]
  • ISO 2194:1991 Industrial screens β€” Woven wire cloth, perforated plate and electroformed sheet β€” Designation and nominal sizes of openings
  • ISO 2195:1972 Data interchange on rolled-up punched paper tape β€” General requirements [Withdrawn without replacement]
  • ISO 2196:1975 Continuous mechanical handling equipment for unit loads β€” Single strand floor mounted truck conveyors (chain above floor) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2197:1972 Sodium hydrogen carbonate for industrial use β€” List of methods of test and preparation of the test sample
  • ISO 2198:1972 Sodium hydrogen carbonate for industrial use β€” Determination of sodium carbonate β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2199:1972 Sodium hydrogen carbonate for industrial use β€” Determination of sodium hydrogen carbonate content β€” Titrimetric method
  • ISO 2200:1972 Sodium hydrogen carbonate for industrial use β€” Determination of moisture content β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2201:1972 Sodium hydrogen carbonate for industrial use β€” Determination of chloride content β€” Mercurimetric method [Withdrawn without replacement]
  • ISO 2202:1972 Liquid chlorine for industrial use β€” Determination of water content using an electrolytic analyser [Withdrawn without replacement]
  • ISO 2203:1973 Technical drawings – Conventional representation of gears
  • ISO 2204:1979 Acoustics β€” Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings [Withdrawn without replacement]
  • ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
  • ISO 2206:1987 Packaging β€” Complete, filled transport packages β€” Identification of parts when testing
  • ISO 2207:1980 Petroleum waxes β€” Determination of congealing point
  • ISO 2208:1973 Phenol, o-cresol, m-cresol and p-cresol for industrial use β€” Determination of crystallizing point after drying with a molecular sieve [Withdrawn without replacement]
  • ISO 2209:1973 Liquid halogenated hydrocarbons for industrial use β€” Sampling
  • ISO 2210:1972 Liquid halogenated hydrocarbons for industrial use β€” Determination of residue on evaporation [Withdrawn without replacement]
  • ISO 2211:1973 Liquid chemical products β€” Measurement of colour in Hazen units (platinum-cobalt scale)
  • ISO 2212:1972 Trichloroethylene for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2213:1972 Perchloroethylene for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2214:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use β€” Determination of manganese content β€” Formaldehyde oxime photometric method [Withdrawn without replacement]
  • ISO 2215:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use β€” Determination of copper content β€” Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2216:1972 Crude sodium borates for industrial use β€” Determination of sodium oxide and boric oxide contents β€” Volumetric method [Withdrawn without replacement]
  • ISO 2217:1972 Crude sodium borates for industrial use β€” Determination of matter insoluble in alkaline medium and preparation of test solutions [Withdrawn without replacement]
  • ISO 2218:1972 Crude sodium borates for industrial use β€” Determination of loss in mass after heating at 900 degrees C [Withdrawn without replacement]
  • ISO 2219:2010 Thermal insulation products for buildings β€” Factory-made products of expanded cork (ICB) β€” Specification
  • ISO 2220:1972 Hand finishing sticks and oil stones β€” Dimensions [Withdrawn: replaced with ISO 603-(1-16)]
  • ISO 2221:1972 Formaldehyde solutions for industrial use β€” Limit test for inorganic chlorides [Withdrawn without replacement]
  • ISO 2222:1972 Formaldehyde solutions for industrial use β€” Limit test for inorganic sulphates [Withdrawn without replacement]
  • ISO 2223:1972 Formaldehyde solutions for industrial use β€” Limit test for heavy metals (excluding iron) [Withdrawn without replacement]
  • ISO 2224:1972 Formaldehyde solutions for industrial use β€” Determination of ash [Withdrawn without replacement]
  • ISO 2225:1972 Formaldehyde solutions for industrial use β€” Determination of acidity [Withdrawn without replacement]
  • ISO 2226:1972 Formaldehyde solutions for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 2227:1972 Formaldehyde solutions for industrial use β€” Determination of formaldehyde content
  • ISO 2228:1972 Formaldehyde solutions for industrial use β€” Determination of methanol content
  • ISO 2229:1973 Equipment for the petroleum and natural gas industries β€” Steel pipe flanges, nominal sizes 1/2 to 24 in β€” Metric dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2230:2002 Rubber products β€” Guidelines for storage
  • ISO 2231:1989 Rubber- or plastics-coated fabrics β€” Standard atmospheres for conditioning and testing
  • ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes β€” Specifications
  • ISO 2233:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Conditioning for testing
  • ISO 2234:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Stacking tests using a static load
  • ISO 2235:1993 Abrasive sheets β€” Dimensions, tolerances and designation [Withdrawn: replaced with ISO 21948]
  • ISO 2236:1991 Assembly tools for screws and nuts β€” Forged and tubular socket wrenches β€” Maximum outside head dimensions
  • ISO 2238:2018 Machine bridge reamers
  • ISO 2239:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of daylight [Withdrawn: replaced with ISO 7589]
  • ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
  • ISO 2241:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of tungsten illumination [Withdrawn: replaced with ISO 7589]
  • ISO 2242:1972 Photography β€” Light sources for use in sensitometric exposure β€” Simulation of the spectral distribution of photoflood illumination [Withdrawn: replaced with ISO 7589]
  • ISO/R 2243:1972 Photography β€” Illumination conditions for viewing colour transparencies and their reproductions [Withdrawn: replaced with ISO 3664]
  • ISO 2244:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Horizontal impact tests
  • ISO 2245:2006 Shaped insulating refractory products β€” Classification
  • ISO 2246:1972 Dense shaped refractory products β€” Nomenclature of manufacturing processes [Withdrawn without replacement]
  • ISO 2247:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Vibration tests at fixed low frequency
  • ISO 2248:1985 Packaging β€” Complete, filled transport packages β€” Vertical impact test by dropping
  • ISO 2249:1973 Acoustics β€” Description and measurement of physical properties of sonic booms
  • ISO 2250:2017 Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
  • ISO 2251:1991 Lined antistatic rubber footwear β€” Specification [Withdrawn without replacement]
  • ISO 2252:1983 Rubber footwear, lined industrial, for use at low temperatures [Withdrawn without replacement]
  • ISO 2253:1999 Curry powder β€” Specification
  • ISO 2254:2004 Cloves, whole and ground (powdered) β€” Specification
  • ISO 2255:1996 Coriander (Coriandrum sativum L.), whole or ground (powdered) β€” Specification
  • ISO 2256:1984 Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) β€” Specification
  • ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
  • ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
  • ISO 2259:1972 Pots for propagation and transplantation made of peat and other plant material β€” Sampling [Withdrawn without replacement]
  • ISO 2261:1994 Reciprocating internal combustion engines β€” Hand-operated control devices β€” Standard direction of motion
  • ISO 2262:1984 General purpose thimbles for use with steel wire ropes β€” Specification
  • ISO 2264:1972 Rolling bearings β€” Bearings with spherical outside surface and extended inner ring width [Withdrawn: replaced with ISO 9628]
  • ISO/R 2265:1972 Rolling bearings with locating snap ring β€” Dimensions [Withdrawn: replaced with ISO 464]
  • ISO 2266:1974 Textile machinery and accessories β€” Metal travellers for spinning and twisting [Withdrawn: replaced with ISO 96-(1-2)]
  • ISO 2267:1986 Surface active agents β€” Evaluation of certain effects of laundering β€” Methods of preparation and use of unsoiled cotton control cloth
  • ISO 2268:1972 Surface active agents (non-ionic) β€” Determination of polyethylene glycols and non-ionic active matter (adducts) β€” Weibull method
  • ISO 2269:2000 Shipbuilding β€” Class A magnetic compasses, azimuth reading devices and binnacles β€” Tests and certification [Withdrawn: replaced with ISO 25862]
  • ISO 2270:1989 Non-ionic surface active agents β€” Polyethoxylated derivatives β€” Iodometric determination of oxyethylene groups
  • ISO 2271:1989 Surface active agents β€” Detergents β€” Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
  • ISO 2272:1989 Surface active agents β€” Soaps β€” Determination of low contents of free glycerol by molecular absorption spectrometry
  • ISO 2276:1972 Reciprocating internal combustion engines β€” Definition of right-hand and left-hand single bank engines [Withdrawn: replaced with ISO 1204]
  • ISO 2277:1973 Static invertors for aircraft
  • ISO 2281:1990 Horology – Water-resistant watches [Withdrawn: replaced with ISO 22810:2010]
  • ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in β€” Reduced shank taps
  • ISO 2284:2017 Hand taps for parallel and taper pipe threads β€” General dimensions and marking
  • ISO 2285:2019 Rubber, vulcanized or thermoplastic β€” Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
  • ISO 2286 Rubber- or plastics-coated fabrics β€” Determination of roll characteristics
    • ISO 2286-1:2016 Part 1: Methods for determination of length, width and net mass
    • ISO 2286-2:2016 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
    • ISO 2286-3:2016 Part 3: Method for determination of thickness
  • ISO 2288:1997 Agricultural tractors and machines β€” Engine test code β€” Net power [Withdrawn without replacement]
  • ISO 2289:1972 Rotary drilling equipment β€” Kellys [Withdrawn without replacement]
  • ISO 2290:1972 Rotary drilling equipment β€” Upper and lower Kelly cocks [Withdrawn without replacement]
  • ISO 2291:1980 Cocoa beans β€” Determination of moisture content (Routine method) [Withdrawn: replaced with ISO 2451]
  • ISO 2292:2017 Cocoa beans β€” Sampling
  • ISO 2293:1988 Meat and meat products β€” Enumeration of micro-organisms β€” Colony count technique at 30 degrees C (Reference method) [Withdrawn without replacement]
  • ISO 2294:1974 Meat and meat products β€” Determination of total phosphorus content (Reference method) [Withdrawn: replaced with ISO 23776]
  • ISO 2295:1974 Avocados β€” Guide for storage and transport
  • ISO 2296:2018 Metal slitting saws with fine and coarse teeth β€” Metric series
  • ISO 2297:1973 Chemical analysis of aluminium and its alloys β€” Complexometric determination of magnesium
  • ISO/R 2298:1972 Alluminium and its alloys β€” Determination of chromium β€” Spectrophotometric method using diphenylcarbazide [Withdrawn without replacement]
  • ISO 2299:1973 Sawn timber of broadleaved species β€” Defects β€” Classification

ISO 2300 – ISO 2499

  • ISO 2300:1973 Sawn timber of broadleaved species β€” Defects β€” Terms and definitions
  • ISO 2301:1973 Sawn timber of broadleaved species β€” Defects β€” Measurement
  • ISO 2302:2020 Isobutene-isoprene rubber (IIR) β€” Evaluation procedure
  • ISO 2303:2019 Isoprene rubber (IR) β€” Non-oil-extended, solution-polymerized types β€” Evaluation procedures
  • ISO 2306:1972 Drills for use prior to tapping screw threads
  • ISO 2307:2019 Fibre ropes β€” Determination of certain physical and mechanical properties
  • ISO 2308:1972 Hooks for lifting freight containers of up to 30 tonnes capacity β€” Basic requirements
  • ISO 2309:1980 Coke β€” Sampling [Withdrawn: replaced with ISO 18283]
  • ISO 2311:1972 Electrolytic cathode copper [Withdrawn: replaced with ISO 431]
  • ISO 2312:1972 Carbon tetrachloride for industrial use β€” Methods of test [Withdrawn without replacement]
  • ISO 2313 Textiles β€” Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery
  • ISO 2313-1:2021 Part 1: Method of the horizontally folded specimen
  • ISO 2313-2:2021 Part 2: Method of the vertically folded specimen
  • ISO 2314:2009 Gas turbines β€” Acceptance tests
  • ISO 2315:1980 Aircraft β€” Two- and four-pole sealed electromagnetic relays, 2 A and 3 A β€” Clearance and fixing dimensions
  • ISO 2316:1973 Rolling bearings β€” Metric tapered roller bearings β€” Bearing width and cup width [Withdrawn: replaced with ISO 355]
  • ISO 2318 Measurement of carbon variation in threads of hardened and tempered bolts, screws, and studs [Rejected draft]
  • ISO 2320:2015 Fasteners β€” Prevailing torque steel nuts β€” Functional properties
  • ISO 2321:2017 Rubber threads β€” Methods of test
  • ISO 2322:2014 Styrene-butadiene rubber (SBR) β€” Emulsion- and solution-polymerized types β€” Evaluation procedures
  • ISO 2324:1972 End mills and slot drills β€” Milling cutters with 7/24 taper shanks [Withdrawn: replaced with ISO 1641-3]
  • ISO 2325:1986 Coke β€” Size analysis (Nominal top size 20 mm or less) [Withdrawn: replaced with ISO 728]
  • ISO 2326:1972 Continuous mechanical handling equipment for loose bulk materials β€” Aeroslides
  • ISO 2327:1972 Pneumatic handling appliances for loose bulk materials β€” Piping
  • ISO 2328:2011 Fork-lift trucks β€” Hook-on type fork arms and fork arm carriages β€” Mounting dimensions
  • ISO 2329:1983 Fork-lift trucks β€” Fork arms β€” Dimensions [Withdrawn without replacement]
  • ISO 2330:2002 Fork-lift trucks β€” Fork arms β€” Technical characteristics and testing
  • ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
  • ISO 2332:2009 Agricultural tractors and machinery β€” Connection of implements via three-point linkage β€” Clearance zone around implement
  • ISO 2333:1972 Shipbuilding β€” Cargo gear particulars book [Withdrawn without replacement]
  • ISO 2335 Commercial refrigerated cabinets β€” Methods of test β€” Temperature Test [Draft renamed ISO 1992-3]
  • ISO 2336:1980 Hand and machine hacksaw blades β€” Dimensions for lengths up to 450 mm and pitches up to 6,3 mm [Withdrawn without replacement]
  • ISO 2337 [Draft merged into ISO 370]
  • ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
  • ISO 2339:1986 Taper pins, unhardened
  • ISO 2340:1986 Clevis pins without head
  • ISO 2341:1986 Clevis pins with head
  • ISO 2342:2003 Slotted headless screws with shank
  • ISO 2343:1972 Hexagon socket set screws β€” Metric series [Withdrawn: replaced with ISO 4026, ISO 4027, ISO 4028, and ISO 4029]
  • ISO 2344:1998 Road vehicles β€” M14 x 1,25 spark-plugs with conical seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2345:1994 Road vehicles β€” M18 x 1,5 spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
  • ISO 2346:2001 Road vehicles β€” M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing [Withdrawn without replacement]
  • ISO 2347:1994 Road vehicles β€” M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
  • ISO 2349:1973 Rolling bearings β€” Tapered rolling bearings β€” Sub-units β€” Tolerances β€” Metric series, normal tolerance class and tolerance class 6 β€” Inch series, tolerance class 4 (normal tolerance class) [Withdrawn: Replaced with ISO 492 and ISO 578 (now withdrawn)]
  • ISO 2351 Assembly tools for screws and nuts β€” Machine-operated screwdriver bits
    • ISO 2351-1:2007 Part 1: Screwdriver bits for slotted head screws
    • ISO 2351-2:2002 Part 2: Screwdriver bits for cross-recessed head screws
  • ISO 2352:2000 Assembly tools for screws and nuts β€” Spiral ratchet screwdriver ends β€” Dimensions [Withdrawn without replacement]
  • ISO 2353:1972 Magnesium and its alloys β€” Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver β€” Periodate photometric method
  • ISO 2354:1976 Magnesium alloys β€” Determination of insoluble zirconium β€” Alizarin sulphonate photometric method
  • ISO 2355:1972 Chemical analysis of magnesium and its alloys β€” Determination of rare earths β€” Gravimetric method
  • ISO 2358:1972 Prevailing torque-type steel hexagon locknuts β€” Dimensions β€” Metric series [Withdrawn: replaced with ISO 7040, ISO 7041, ISO 7042, ISO 7043, and ISO 7044]
  • ISO 2359:1972 Prevailing torque-type steel hexagon locknuts β€” Dimensions β€” Inch series [Withdrawn without replacement]
  • ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals β€” Measurement of coating thickness β€” Amplitude-sensitive eddy-current method
  • ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates β€” Measurement of coating thickness β€” Magnetic method
  • ISO 2362:1972 Aluminium fluoride for industrial use β€” Determination of fluorine content β€” Modified Willard-Winter method [Withdrawn without replacement]
  • ISO 2363:1972 Sulphuric acid and oleums for industrial use β€” Determination of oxides of nitrogen β€” 2,4- Xylenol spectrophotometric method [Withdrawn without replacement]
  • ISO 2364:1972 Ammonium nitrate for industrial use β€” Determination of free acidity β€” Volumetric method [Withdrawn without replacement]
  • ISO 2365:1972 Ammonium nitrate for industrial use β€” Measurement of pH value β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2366:1974 Cryolite, natural and artificial β€” Determination of sodium content β€” Flame emission and atomic absorption spectrophotometric methods
  • ISO 2367:1972 Cryolite, natural and artificial β€” Determination of aluminium content β€” 8- Hydroxyquinoline gravimetric method
  • ISO 2368:1972 Aluminium fluoride for industrial use β€” Determination of iron content β€” 1,10- Phenanthroline photometric method [Withdrawn without replacement]
  • ISO 2369:1972 Aluminium fluoride for industrial use β€” Determination of silica content β€” Spectrophotometric method using the reduced silicomolybdic complex [Withdrawn without replacement]
  • ISO 2370:2019 Textiles β€” Determination of fineness of flax fibres β€” Permeametric methods
  • ISO 2371:1974 Field balancing equipment β€” Description and evaluation [Withdrawn without replacement]
  • ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s β€” Basis for specifying evaluation standards [Withdrawn: replaced with ISO 10816-1]
  • ISO 2373:1987 Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm β€” Measurement and evaluation of the vibration severity [Withdrawn without replacement]
  • ISO 2374:1983 Lifting appliances β€” Range of maximum capacities for basic models
  • ISO/IEC 2375:2003 Information technology – Procedure for registration of escape sequences and coded character sets
  • ISO 2376:2019 Anodizing of aluminium and its alloys β€” Determination of breakdown voltage and withstand voltage
  • ISO 2377:1972 Magnesium alloy sand castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2378:1972 Aluminium alloy chill castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2379:1972 Aluminium alloy sand castings β€” Reference test bar [Withdrawn without replacement]
  • ISO 2380:1979 Screwdriver blades for slotted head screws [Withdrawn without replacement]
  • ISO 2381:1972 Continuous mechanical handling equipment for unit loads β€” Single strand floor truck conveyors (chain below floor) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO/IEC 2382:2015 Information technology – Vocabulary
    • ISO/IEC 2382-36:2019 Part 36: Learning, education and training
    • ISO/IEC 2382-37:2017 Part 37: Biometrics
  • ISO 2383 Data processing β€” Vocabulary β€” Part 04: Organization of data [Draft merged into ISO 2382]
  • ISO 2384:1977 Documentation – Presentation of translations
  • ISO 2385:2020 Packed cork β€” Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste β€” Sampling to determine moisture content
  • ISO 2386:2019 Packed cork β€” Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste β€” Determination of moisture content
  • ISO 2387:1972 Continuous mechanical handling equipment for loose bulk materials β€” Mobile belt conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2388:1972 Continuous mechanical handling equipment for unit loads β€” Mobile belt conveyors (canvas, rubber, plastic, etc.) β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2389:1972 Continuous mechanical handling equipment for loose bulk materials β€” Picking table conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2390:1972 Continuous mechanical handling equipment for loose bulk materials β€” Apron conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2391:1972 Continuous mechanical handling equipment for loose bulk materials β€” Scraper conveyors and "en masse" conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2392:1972 Continuous mechanical handling equipment for loose bulk materials β€” Hydraulic conveyors β€” Safety code [Withdrawn: replaced with ISO 7149]
  • ISO 2393:2014 Rubber test mixes β€” Preparation, mixing and vulcanization β€” Equipment and procedures
  • ISO 2394:2015 General principles on reliability for structures
  • ISO 2395:1990 Test sieves and test sieving – Vocabulary
  • ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air β€” Specification
  • ISO 2400:2012 Non-destructive testing β€” Ultrasonic testing β€” Specification for calibration block No. 1
  • ISO 2401:2018 Welding consumables β€” Covered electrodes β€” Determination of the efficiency, metal recovery and deposition coefficient
  • ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
  • ISO 2403:2021 Textiles β€” Cotton fibres β€” Determination of micronaire value
  • ISO 2404:1986 Cinematography β€” Six-track magnetic sound records on 70 mm striped release prints β€” Locations and dimensions
  • ISO 2405:1972 Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick [Withdrawn: replaced with ISO 1106-2]
  • ISO 2406:1974 Continuous mechanical handling equipment β€” Mobile and portable conveyors β€” Constructional specifications
  • ISO 2407:1997 Test conditions for internal cylindrical grinding machines with horizontal spindle β€” Testing of accuracy
  • ISO 2408:2017 Steel wire ropes β€” Requirements
  • ISO 2409:2020 Paints and varnishes β€” Cross-cut test
  • ISO 2410:1973 Household refrigerators β€” Methods of test for the information of the consumer [Withdrawn without replacement]
  • ISO 2411:2017 Rubber- or plastics-coated fabrics β€” Determination of coating adhesion
  • ISO 2412:1982 Shipbuilding β€” Colours of indicator lights
  • ISO 2415:2004 Forged shackles for general lifting purposes β€” Dee shackles and bow shackles
  • ISO 2416:1992 Passenger cars β€” Mass distribution
  • ISO 2417:2016 Leather β€” Physical and mechanical tests β€” Determination of the static absorption of water
  • ISO 2418:2017 Leather β€” Chemical, physical and mechanical and fastness tests β€” Sampling location
  • ISO 2419:2012 Leather β€” Physical and mechanical tests β€” Sample preparation and conditioning
  • ISO 2420:2017 Leather β€” Physical and mechanical tests β€” Determination of apparent density and mass per unit area
  • ISO 2421:2003 Coated abrasives β€” Cylindrical sleeves
  • ISO 2422:1986 Truncated cone abrasive sleeves β€” Dimensions and designation [Withdrawn without replacement]
  • ISO 2423:1982 Acceptance conditions for radial drilling machines with the arm adjustable in height β€” Testing of accuracy
  • ISO 2424:2007 Textile floor coverings β€” Vocabulary
  • ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
  • ISO 2426 Plywood β€” Classification by surface appearance
  • ISO 2426-1:2020 Part 1: General
  • ISO 2426-2:2020 Part 2: Hardwood
  • ISO 2426-3:2020 Part 3: Softwood
  • ISO 2426-4:2020 Part 4: Palm-plywood
  • ISO 2427:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of beech [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2428:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of birch [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2429:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2430:1974 Plywood β€” Veneer plywood with rotary cut veneer for general use β€” Classification by appearance of panels with outer veneers of poplar [Withdrawn: replaced with ISO 2426-(2-3)]
  • ISO 2431:2019 Paints and varnishes β€” Determination of flow time by use of flow cups
  • ISO 2433:1999 Machine tools β€” Test conditions for external cylindrical and universal grinding machines with a movable table β€” Testing of accuracy
  • ISO 2434:1973 Compressed non-breathing air for use in aircraft
  • ISO 2435:1973 Nitrogen for use in aircraft
  • ISO 2436:1973 Heat-resisting equipment wires for aircraft β€” Methods of test
  • ISO 2437:1972 Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick [Withdrawn without replacement]
  • ISO 2438:1981 Rubber latex, synthetic β€” Codification [Withdrawn without replacement]
  • ISO 2439:2008 Flexible cellular polymeric materials β€” Determination of hardness (indentation technique)
  • ISO 2440:2019 Flexible and rigid cellular polymeric materials β€” Accelerated ageing tests
  • ISO 2441:1975 Pipeline flanges for general use β€” Shapes and dimensions of pressure-tight surfaces [Withdrawn: replaced with ISO 7005-(1-3)]
  • ISO 2443:1980 Vines β€” Root stock, cuttings, scions and plants β€” Specification [Withdrawn without replacement]
  • ISO 2444:1988 Joints in building – Vocabulary [Withdrawn: replaced with ISO 6707-1]
  • ISO 2445:1972 Joints in building β€” Fundamental principles for design
  • ISO 2446:2008 Milk β€” Determination of fat content [Withdrawn: replaced with ISO 19662]
  • ISO 2447:1998 Fruit and vegetable products β€” Determination of tin content
  • ISO 2448:1998 Fruit and vegetable products β€” Determination of ethanol content
  • ISO 2449:1974 Milk and liquid milk products β€” Density hydrometers for use in products with a surface tension of approximately 45 mN/m [Withdrawn without replacement]
  • ISO 2450:2008 Cream β€” Determination of fat content β€” Gravimetric method (Reference method)
  • ISO 2451:2017 Cocoa beans β€” Specification and quality requirements
  • ISO 2452 Data processing β€” Vocabulary β€” Part 05: Representation of data [Draft merged into ISO 2382]
  • ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized β€” Determination of bound styrene content β€” Refractive index method
  • ISO 2454:1995 Rubber products β€” Determination of zinc content β€” EDTA titrimetric method
  • ISO 2455 Data processing β€” Vocabulary β€” [Draft merged into ISO 2382]
  • ISO 2456:1986 Surface active agents β€” Water used as a solvent for tests β€” Specification and test methods
  • ISO 2457:1976 Solid wood parquet β€” Classification of beech strips
  • ISO 2458:1975 End-suction centrifugal pumps (rating 16 bar) β€” Test Code [Rejected draft]
  • ISO 2460:1973 Sodium hydrogen carbonate for industrial use β€” Determination of iron content β€” 1,10- Phenanthroline photometric method
  • ISO 2461:1973 Sodium hydrogen carbonate for industrial use β€” Determination of matter insoluble in water
  • ISO 2462:1973 Sodium chlorate for industrial use β€” Determination of moisture content β€” Gravimetric method
  • ISO 2463:1973 Sodium chlorate for industrial use β€” Determination of chloride content β€” Mercurimetric method
  • ISO 2464:1973 Crude glycerine for industrial use β€” Calculation of Matter (Organic) Non-Glycerol (MONG) [Withdrawn without replacement]
  • ISO 2465:1973 Glycerols for industrial use β€” Determination of arsenic content β€” Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2466:1973 Potassium hydroxide for industrial use β€” Sampling β€” Test sample β€” Preparation of the main solution for carrying out certain determinations
  • ISO 2467:2004 Cinematography β€” Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints β€” Positions and dimensions
  • ISO 2469:2014 Paper, board and pulps β€” Measurement of diffuse radiance factor (diffuse reflectance factor)
  • ISO 2470 Paper, board and pulps β€” Measurement of diffuse blue reflectance factor
    • ISO 2470-1:2016 Part 1: Indoor daylight conditions (ISO brightness)
    • ISO 2470-2:2016 Part 2: Outdoor daylight conditions (D65 brightness)
  • ISO 2471:2008 Paper and board β€” Determination of opacity (paper backing) β€” Diffuse reflectance method
  • ISO 2472:1975 Ebonite β€” Determination of tensile strength and elongation at break [Withdrawn without replacement]
  • ISO 2473:1972 Ebonite β€” Determination of cross-breaking strength [Withdrawn without replacement]
  • ISO 2474:1972 Ebonite β€” Determination of crushing strength [Withdrawn without replacement]
  • ISO 2475:2011 Chloroprene rubber (CR) β€” General-purpose types β€” Evaluation procedure
  • ISO 2476:2014 Butadiene rubber (BR) β€” Solution-polymerized types β€” Evaluation procedures
  • ISO 2477:2005 Shaped insulating refractory products β€” Determination of permanent change in dimensions on heating
  • ISO 2478:1987 Dense shaped refractory products β€” Determination of permanent change in dimensions on heating
  • ISO 2479:1972 Sodium chloride for industrial use β€” Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
  • ISO 2480:1972 Sodium chloride for industrial use β€” Determination of sulphate content β€” Barium sulphate gravimetric method
  • ISO 2481:1973 Sodium chloride for industrial use β€” Determination of halogens, expressed as chlorine β€” Mercurimetric method
  • ISO 2482:1973 Sodium chloride for industrial use β€” Determination of calcium and magnesium contents β€” EDTA complexometric methods
  • ISO 2483:1973 Sodium chloride for industrial use β€” Determination of the loss of mass at 110 degrees C
  • ISO 2484:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Flame emission spectrophotometric method [Withdrawn without replacement]
  • ISO 2485:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
  • ISO 2486:1973 Potassium sulphate for industrial use β€” Determination of potassium content β€” Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
  • ISO 2487:1973 Potassium sulphate for industrial use β€” Determination of sulphate content β€” Barium sulphate gravimetric method [Withdrawn without replacement]
  • ISO 2488:1973 Potassium sulphate for industrial use β€” Determination of chloride content β€” Mercurimetric method [Withdrawn without replacement]
  • ISO 2489:1973 Potassium sulphate for industrial use β€” Determination of acidity to methyl orange [Withdrawn without replacement]
  • ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module β€” Nominal dimensions
  • ISO 2491:1974 Thin parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
  • ISO 2492:1974 Thin taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
  • ISO 2493 Paper and board β€” Determination of bending resistance
    • ISO 2493-1:2010 Part 1: Constant rate of deflection
    • ISO 2493-2:2011 Part 2: Taber-type tester
  • ISO 2494:1974 Paper and board β€” Recommended procedure for the determination of roughness β€” Constant-pressure air-flow method [Withdrawn: replaced with ISO 8791-(2-3)]
  • ISO 2495:1995 Iron blue pigments β€” Specifications and methods of test
  • ISO 2496:1973 secButyl alcohol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2497:1973 Methyl ethyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2498:1974 Methyl ethyl ketone for industrial use β€” Examination for residual odour [Withdrawn without replacement]
  • ISO 2499:1974 isoButyl methyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]

ISO 2500 – ISO 2649

  • ISO 2500:1974 isoAmyl ethyl ketone for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2501:1973 Methyl ethyl ketone, isobutyl methyl ketone and isoamyl ethyl ketone for industrial use β€” Determination of alcoholic impurities β€” Volumetric method [Withdrawn without replacement]
  • ISO 2502 Gas welding equipment β€” Safety code [Rejected draft] [5]
  • ISO 2503:2009 Gas welding equipment β€” Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
  • ISO 2504:1973 Radiography of welds and viewing conditions for films β€” Utilization of recommended patterns of image quality indicators (I.Q.I.) [Withdrawn without replacement]
  • ISO 2505:2005 Thermoplastics pipes β€” Longitudinal reversion β€” Test method and parameters
  • ISO 2506:1981 Polyethylene pipes (PE) β€” Longitudinal reversion β€” Test methods and specification [Withdrawn: replaced with ISO 2505]
  • ISO 2507 Thermoplastics pipes and fittings β€” Vicat softening temperature
    • ISO 2507-1:1995 Thermoplastics pipes and fittings β€” Vicat softening temperature β€” Part 1: General test method
    • ISO 2507-2:1995 Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
  • ISO 2508:1981 Unplasticized polyvinyl chloride (PVC) pipes β€” Water absorption β€” Determination and specification [Withdrawn without replacement]
  • ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles
  • ISO 2510:1989 Sound-reducing composition cork in tiles [Withdrawn without replacement]
  • ISO 2511:1974 Furfural for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2512:1974 Furfural for industrial use β€” Determination of total carbonyl compounds β€” Volumetric method [Withdrawn without replacement]
  • ISO 2513:1974 Acetaldehyde for industrial use β€” Determination of density at 15 degrees C [Withdrawn without replacement]
  • ISO 2514:1974 Acetaldehyde for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2515:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) β€” Determination of ammoniacal nitrogen content β€” Volumetric method after distillation [Withdrawn without replacement]
  • ISO 2516:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) β€” Determination of total alkalinity β€” Volumetric method [Withdrawn without replacement]
  • ISO 2517:1974 Diacetone alcohol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2518:1974 Diacetone alcohol and hexylene glycol for industrial use β€” Test for miscibility with water [Withdrawn without replacement]
  • ISO 2519:1974 Hexylene glycol for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2520:1974 Tritolyl phosphate for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2521:1974 Tritolyl phosphate for industrial use β€” Determination of acidity to phenol red β€” Volumetric method [Withdrawn without replacement]
  • ISO 2522:1974 Tritolyl phosphate for industrial use β€” Determination of apparent free phenols content β€” Volumetric method [Withdrawn without replacement]
  • ISO 2523:1974 Adipate esters for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2524:1974 Adipate esters for industrial use β€” Measurement of colour after heat treatment [Withdrawn without replacement]
  • ISO 2525:1974 Adipate esters for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2526:1974 Adipate esters for industrial use β€” Determination of ash β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2527:1974 Adipate esters for industrial use β€” Determination of ester content β€” Volumetric method [Withdrawn without replacement]
  • ISO 2528:2017 Sheet materials β€” Determination of water vapour transmission rate (WVTR) β€” Gravimetric (dish) method
  • ISO 2529:1973 Aircraft β€” Zones, access doors and panels β€” Referencing system [Withdrawn without replacement]
  • ISO 2530:1975 Keyboard for international information processing interchange using the ISO 7- bit coded character set β€” Alphanumeric area [Withdrawn: replaced with ISO 9995-(1,7)]
  • ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
  • ISO 2532:1974 Steel wire ropes – Vocabulary
  • ISO 2533:1975 Standard Atmosphere
  • ISO 2534:2020 Road vehicles β€” Engine test code β€” Gross power
  • ISO 2535:2001 Plastics β€” Unsaturated-polyester resins β€” Measurement of gel time at ambient temperature
  • ISO 2536:1974 Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series β€” Dimensions of flanges [Withdrawn without replacement]
  • ISO 2537:2007 Hydrometry – Rotating-element current-meters
  • ISO 2538 Geometrical product specifications (GPS) – Wedges
    • ISO 2538-1:2014 Part 1: Series of angles and slopes
    • ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
  • ISO 2539:1974 Numerical control of machines β€” Punched tape variable block format for contouring and contouring/positioning [Withdrawn: replaced with ISO 6983-1]
  • ISO 2540:2016 Centre drills for centre holes with protecting chamfer β€” Type B
  • ISO 2541:2016 Centre drills for centre holes with radius form β€” Type R
  • ISO 2542:1980 Internal combustion engines β€” Spark plug ignition β€” Terminology [Withdrawn: replaced with ISO 6518-1]
  • ISO 2543:1973 Copper and copper alloys β€” Determination of manganese β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2544:1975 Textile machinery and accessories β€” Warping machinery β€” Preparation of warp for weaving β€” Vocabulary [Withdrawn without replacement]
  • ISO 2546:1973 Seamless plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
  • ISO 2547:1973 Welded plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
  • ISO 2548:1973 Centrifugal, mixed flow and axial pumps β€” Code for acceptance tests β€” Class C [Withdrawn: replaced with ISO 9906]
  • ISO 2549:1972 Textile floor coverings β€” Hand-knotted carpets β€” Determination of tuft leg length above the woven ground
  • ISO 2550:1972 Textile floor coverings β€” Hand-made carpets β€” Determination of types of knots
  • ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form β€” Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
  • ISO 2553:2019 Welding and allied processes – Symbolic representation on drawings – Welded joints
  • ISO 2554:1997 Plastics β€” Unsaturated polyester resins β€” Determination of hydroxyl value
  • ISO 2555:2018 Plastics β€” Resins in the liquid state or as emulsions or dispersions β€” Determination of apparent viscosity using a single cylinder type rotational viscometer method
  • ISO 2556:1974 Plastics β€” Determination of the gas transmission rate of films and thin sheets under atmospheric pressure β€” Manometric method [Withdrawn without replacement]
  • ISO 2557 Plastics β€” Amorphous thermoplastics β€” Preparation of test specimens with a specified maximum reversion
    • ISO 2557-1:1989 Part 1: Bars [Withdrawn without replacement]
    • ISO 2557-2:1986 Part 2: Plates [Withdrawn without replacement]
  • ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics β€” Determination of time of dissolution of the binder in styrene
  • ISO 2559:2011 Textile glass β€” Mats (made from chopped or continuous strands) β€” Designation and basis for specifications
  • ISO 2560:2020 Welding consumables β€” Covered electrodes for manual metal arc welding of non-alloy and fine grain steels β€” Classification
  • ISO 2561:2012 Plastics β€” Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO 2562:1973 Modular units for machine tool construction β€” Slide units
  • ISO 2563:2009 Aircraft ducting and piping β€” Profile dimensions for flanges of V-band couplings
  • ISO 2564 Conveyor chains, attachments and chain wheels β€” Part 2: Chain wheels [Draft renamed ISO 1977-2]
  • ISO 2565 Conveyor chains, attachments and chain wheels β€” Part 3: Attachments β€” Metric series [Draft renamed ISO 1977-3]
  • ISO 2566 Steel β€” Conversion of elongation values
    • ISO 2566-1:2021 Part 1: Carbon and low-alloy steels
    • ISO 2566-2:2021 Part 2: Austenitic steels
  • ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks
  • ISO 2569:1994 Cork stoppers β€” Vocabulary [Withdrawn without replacement]
  • ISO 2572:1982 Textile machinery and accessories β€” Card gauges
  • ISO 2573:1977 Tensile testing systems β€” Determination of K-value [Withdrawn without replacement]
  • ISO 2574:1994 Aircraft – Electrical cables – Identification marking
  • ISO 2575:2021 Road vehicles – Symbols for controls, indicators and tell-tales
  • ISO 2576:1972 Chemical analysis of zinc alloys β€” Polarographic determination of lead and cadmium in zinc alloys containing copper [Withdrawn without replacement]
  • ISO 2577:2007 Plastics β€” Thermosetting moulding materials β€” Determination of shrinkage
  • ISO 2578:1993 Plastics β€” Determination of time-temperature limits after prolonged exposure to heat
  • ISO 2579 Plastics β€” Instrumental evaluation of color difference [Rejected draft]
  • ISO 2580 Plastics β€” Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
    • ISO 2580-1:2002 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19062-1]
    • ISO 2580-2:2003 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19062-2]
  • ISO 2581:1975 Rigid cellular plastics β€” Determination of apparent thermal conductivity by means of a heat-flow meter [Withdrawn: replaced with ISO 8301]
  • ISO 2582:1978 Cork and cork products β€” Determination of thermal conductivity β€” Hot plate method [Withdrawn without replacement]
  • ISO 2583:1972 Tool shanks and equipment with 7/24 tapers β€” Collar dimensions [Withdrawn: replaced with ISO 297]
  • ISO 2584:2016 Cylindrical cutters with plain bore and key drive β€” Metric series
  • ISO 2585:1972 Slotting cutters with plain bore and key drive β€” Metric series
  • ISO 2586:1985 Shell end mills with plain bore and tenon drive β€” Metric series
  • ISO 2587:1972 Side and face milling cutters with plain bore and key drive β€” Metric series
  • ISO 2588:2014 Leather β€” Sampling β€” Number of items for a gross sample
  • ISO 2589:2016 Leather β€” Physical and mechanical tests β€” Determination of thickness
  • ISO 2590:1973 General method for the determination of arsenic β€” Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
  • ISO 2591 Test sieving
    • ISO 2591-1:1988 Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
  • ISO 2592:2017 Petroleum and related products β€” Determination of flash and fire points β€” Cleveland open cup method
  • ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
  • ISO 2594:1972 Building drawings β€” Projection methods [Withdrawn: replaced with ISO 128-43]
  • ISO 2595:1973 Building drawings β€” Dimensioning of production drawings β€” Representation of manufacturing and work sizes [Withdrawn: replaced with ISO 129, now ISO 129-1]
  • ISO 2596:2006 Iron ores β€” Determination of hygroscopic moisture in analytical samples β€” Gravimetric, Karl Fischer and mass-loss methods
  • ISO 2597 Iron ores β€” Determination of total iron content
    • ISO 2597-1:2006 Part 1: Titrimetric method after tin(II) chloride reduction
    • ISO 2597-2:2019 Part 2: Titrimetric methods after titanium(III) chloride reduction
  • ISO 2598 Iron ores β€” Determination of silicon content
    • ISO 2598-1:1992 Part 1: Gravimetric methods
    • ISO 2598-2:1992 Part 2: Reduced molybdosilicate spectrophotometric method
  • ISO 2599:2003 Iron ores β€” Determination of phosphorus content β€” Titrimetric method
  • ISO 2600 Iron ores β€” Sampling β€” Incremental method [Rejected draft]
  • ISO 2601 Iron ores β€” Preparation of samples [Rejected draft]
  • ISO 2602:1980 Statistical interpretation of test results – Estimation of the mean – Confidence interval
  • ISO 2603:2016 Simultaneous interpreting β€” Permanent booths β€” Requirements
  • ISO 2604 Steel products for pressure purposes β€” Quality requirements
    • ISO 2604-1:1975 Part 1: Forgings [Withdrawn: replaced with ISO 9327-(1-5)]
    • ISO 2604-2:1975 Part 2: Wrought [Withdrawn: replaced with ISO 9329-(1-4)]
    • ISO 2604-3:1975 Part 3: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9330-(1-3)]
    • ISO 2604-4:1975 Part 4: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9328-(1-5)]
    • ISO 2604-5:1978 Part 5: Longitudinally welded austenitic stainless steel tubes [Withdrawn: replaced with ISO 9330-6]
    • ISO 2604-6:1978 Part 6: Submerged arc longitudinally or spirally welded steel tubes [Withdrawn: replaced with ISO 9330-1]
    • ISO/TR 2604-7:1986 Part 7: Carbon steel plate (thicknesses over 100 to 250 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
    • ISO 2604-8:1985 Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
  • ISO 2605 Steel products for pressure purposes β€” Derivation and verification of elevated temperature properties [Original draft renamed ISO 2604-2]
    • ISO 2605-1:1976 Part 1: Yield or proof stress of carbon and low alloy steel products [Withdrawn without replacement]
    • ISO 2605-2:1976 Part 2: Proof stress of austenitic steel products [Withdrawn without replacement]
    • ISO 2605-3:1985 Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
  • ISO 2606 [Draft renamed ISO 2604-3]
  • ISO 2607 [Draft renamed ISO 2604-4]
  • ISO 2608 Carbon and low-alloy steels β€” procedure for deriving minimum proof stress values
  • ISO 2624:1990 Copper and copper alloys β€” Estimation of average grain size
  • ISO 2625:1973 Copper and copper alloys β€” Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
  • ISO 2626:1973 Copper β€” Hydrogen embrittlement test
  • ISO 2627:1973 Copper and copper alloys β€” Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
  • ISO 2628:1973 Basic mode control procedures – Complements
  • ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
  • ISO/TR 2630:1978 Rubbers, raw β€” Sampling for inspection by variables [Withdrawn: replaced with ISO 1795]
  • ISO 2631 Mechanical vibration and shock β€” Evaluation of human exposure to whole-body vibration
    • ISO 2631-1:1997 Part 1: General requirements
    • ISO 2631-2:2003 Part 2: Vibration in buildings (1 Hz to 80 Hz)
    • ISO 2631-3:1985 Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz [Withdrawn: replaced with ISO 2631-1]
    • ISO 2631-4:2001 Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
    • ISO 2631-5:2018 Part 5: Method for evaluation of vibration containing multiple shocks
  • ISO 2632 Roughness comparison specimens
    • ISO 2632-1:1985 Part 1: Turned, ground, bored, milled, shaped and planed [Withdrawn without replacement]
    • ISO 2632-2:1985 Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished [Withdrawn without replacement]
    • ISO 2632-3:1979 Part 3: Cast surfaces [Withdrawn without replacement]
  • ISO 2633:1974 Determination of imposed floor loads in production buildings and warehouses [Withdrawn without replacement]
  • ISO 2634 Current codes for designing reinforcements of openings [Rejected draft] [6]
  • ISO 2635:2003 Aircraft β€” Conductors for general purpose aircraft electrical cables and aerospace applications β€” Dimensions and characteristics
  • ISO 2636:1973 Information processing β€” Conventions for incorporating flowchart symbols in flowcharts [Withdrawn: replaced with ISO 5807]
  • ISO 2637:1973 Aluminium and its alloys β€” Determination of zinc β€” Atomic absorption method [Withdrawn: replaced with ISO 5194]
  • ISO 2638 Liquid flow measurement in open channels β€” Dilution methods for the measurement of steady flow β€” Part 2: Integration method [Draft renamed ISO 555-2
  • ISO 2639:2002 Steels β€” Determination and verification of the depth of carburized and hardened cases [Withdrawn: replaced with ISO 18203]
  • ISO 2640 Commercial refrigerated cabinets β€” Methods of test β€” Defrosting test [Draft renamed ISO 1992-4]
  • ISO 2641 Commercial refrigerated cabinets β€” Methods of test β€” Water vapour condensation test [Draft renamed ISO 1992-5]
  • ISO 2642 Commercial refrigerated cabinets β€” Methods of test β€” Electrical energy consumption test [Draft renamed ISO 1992-6]
  • ISO 2643 Commercial refrigerated cabinets β€” Methods of test β€” Test for odour of material [Rejected draft]
  • ISO 2644:1975 Materials and equipment for petroleum and natural gas industries β€” Steel drill pipe for oil or natural gas wells [Withdrawn without replacement]
  • ISO 2645:1975 Materials and equipment for petroleum and natural gas industries β€” Casing and tubing for oil or natural gas wells [Withdrawn: replaced with ISO 11960]
  • ISO 2646:1974 Wool β€” Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
  • ISO 2647:2020 Wool β€” Determination of percentage of medullated fibres by the projection microscope
  • ISO 2648:2020 Wool β€” Determination of fibre length distribution parameters β€” Capacitance method
  • ISO 2649:1974 Wool β€” Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester [Withdrawn without replacement]

ISO 2650 – ISO 2999

  • ISO 2650:1974 Environmental tests for aircraft equipment – Part 1: Scope and applicability [Withdrawn: replaced with ISO 7137]
  • ISO 2651 Environmental tests for aircraft equipment – Part 2.1: Temperature, pressure and humidity [Rejected draft]
  • ISO 2652 Environmental tests for aircraft equipment – Part 2.2: Humidity (24 h cycle) [Rejected draft]
  • ISO 2653:1975 Environmental tests for aircraft equipment
    • ISO 2653-1:1975 β€” Part 1: Ice formation [Withdrawn: replaced with ISO 7137]
  • ISO 2655:1975 Environmental tests for aircraft equipment – Part 2.5: Waterproofness [Withdrawn: replaced with ISO 7137]
  • ISO 2657:1976 Environmental tests for aircraft equipment – Part 2.7: Change of temperature [Withdrawn: replaced with ISO 7137]
  • ISO 2658:1976 Environmental tests for aircraft equipment – Part 2.8: Mould growth [Withdrawn: replaced with ISO 7137]
  • ISO 2659 Environmental tests for aircraft equipment – Part 2.9: Salt mist [Rejected draft]
  • ISO 2663 Environmental tests for aircraft equipment – Part 2.13: Sealing tests [Rejected draft]
  • ISO 2668 Environmental tests for aircraft equipment – Part 3.1: Vibration [Rejected draft]
  • ISO 2669:1995 Environmental tests for aircraft equipment – Steady-state acceleration
  • ISO 2671:1982 Environmental tests for aircraft equipment – Part 3.4: Acoustic vibration
  • ISO 2676:1975 Environmental tests for aircraft equipment – Part 4.1: [Withdrawn: replaced with ISO 7137]
  • ISO 2678:1985 Environmental tests for aircraft equipment β€” Insulation resistance and high voltage tests for electrical equipment
  • ISO 2683 Environmental tests for aircraft equipment – Part 5.1: Explosion proofness [Rejected draft]
  • ISO 2684:1974 Environmental tests for aircraft equipment – Part 5.2: Fluid contamination [Withdrawn: replaced with ISO 7137]
  • ISO 2685:1998 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones
  • ISO 2690:1973 Unrecorded magnetic tapes for instrumentation applications β€” Physical properties and test methods [Withdrawn without replacement]
  • ISO 2691:1987 Photography β€” Expendable photoflash lamps (without integral reflector) β€” Definitions and requirements for luminous flux/time characteristics [Withdrawn without replacement]
  • ISO 2692:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
  • ISO 2694: Pressure Wessels [rejected draft]
  • ISO 2695:1976 Fibre building boards β€” Hard and medium boards for general purposes β€” Quality specifications β€” Appearance, shape and dimensional tolerances [Withdrawn without replacement]
  • ISO 2696:1976 Fibre building boards β€” Hard and medium boards for general purposes β€” Quality specifications β€” Water absorption and swelling in thickness [Withdrawn without replacement]
  • ISO 2697:1999 Diesel engines β€” Fuel nozzles β€” Size "S"
  • ISO 2698:2016 Diesel engines β€” Clamp-mounted fuel injectors, types 7 and 28
  • ISO 2699:1994 Diesel engines β€” Flange-mounted fuel injectors, size "S" β€” Types 2, 3, 4, 5 and 6
  • ISO 2700:1974 Road vehicles β€” Screw-mounted injection nozzle holders size "S" β€” Type 1 [Withdrawn without replacement]
  • ISO 2701:1977 Drawn wire for general purpose non-alloy steel wire ropes β€” Terms of acceptance [Withdrawn without replacement]
  • ISO 2702:1977 Heat-treated steel tapping screws β€” Mechanical properties
  • ISO 2703:1973 Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels β€” Metric series β€” Specification [Withdrawn without replacement]
  • ISO 2704:1998 Road vehicles β€” M10 x 1 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2705:2006 Road vehicles β€” M12 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
  • ISO 2706 Micrographics β€” Transparent A6 size microfiche of uniform division β€” Image arrangement No. 1 [Draft merged into ISO 2707]
  • ISO 2707:1980 Micrographics β€” Transparent A6 size microfiche of uniform division β€” Image arrangements No. 1 and No. 2 [Withdrawn: replaced with ISO 9923]
  • ISO 2708:1980 Micrographics β€” Transparent A6 size microfiche of variable division β€” Image arrangements A and B [Withdrawn: replaced with ISO 9923]
  • ISO 2709:2008 Information and documentation – Format for information exchange
  • ISO 2710 Reciprocating internal combustion engines – Vocabulary
    • ISO 2710-1:2000 Part 1: Terms for engine design and operation
    • ISO 2710-2:1999 Part 2: Terms for engine maintenance
  • ISO 2711:1973 Information processing interchange – Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2712:1973 Copper and copper alloys β€” Rockwell superficial hardness test (N and T scales) [Withdrawn: replaced with ISO 1024]
  • ISO 2713:1973 Copper and copper alloys β€” Rockwell hardness test (B, F and G scales) [Withdrawn: replaced with ISO 6508]
  • ISO 2714:2017 Liquid hydrocarbons β€” Volumetric measurement by displacement meter
  • ISO 2715:2017 Liquid hydrocarbons β€” Volumetric measurement by turbine flowmeter
  • ISO 2716:1972 Freight containers β€” Coding and identification [Withdrawn: replaced with ISO 6346]
  • ISO 2717:1973 Sulphuric acid and oleum for industrial use β€” Determination of lead content β€” Dithizone photometric method [Withdrawn without replacement]
  • ISO 2718:1974 Standard layout for a method of chemical analysis by gas chromatography [Withdrawn without replacement]
  • ISO 2719:2016 Determination of flash point β€” Pensky-Martens closed cup method
  • ISO 2720:1974 Photography β€” General purpose photographic exposure meters (photoelectric type) β€” Guide to product specification
  • ISO 2721:2013 Photography β€” Film-based cameras β€” Automatic controls of exposure
  • ISO 2722:1997 Vitreous and porcelain enamels β€” Determination of resistance to citric acid at room temperature [Withdrawn: replaced with ISO 28706-1]
  • ISO 2723:1995 Vitreous and porcelain enamels for sheet steel β€” Production of specimens for testing [Withdrawn: replaced with ISO 28764]
  • ISO 2724:1973 Vitreous and porcelain enamels for cast iron β€” Production of specimens for testing [Withdrawn: replaced with ISO 28764]
  • ISO 2725 Assembly tools for screws and nuts β€” Square drive sockets
  • ISO 2725-1:2017 Part 1: Hand-operated sockets
  • ISO 2725-2:2017 Part 2: Machine-operated sockets ("impact")
  • ISO 2725-3:2017 Part 3: Machine-operated sockets ("non-impact")
  • ISO 2726:1995 Woodworking tools β€” Metal-bodied bench planes, plane cutters and cap irons [Withdrawn without replacement]
  • ISO 2727:1973 Modular units for machine tool construction β€” Headstocks
  • ISO 2728:1982 Woodworking tools β€” Plane irons [Withdrawn: replaced with ISO 2726]
  • ISO 2729:1995 Woodworking tools β€” Chisels and gouges
  • ISO 2730:1973 Woodworking tools β€” Wooden bodied planes [Withdrawn without replacement]
  • ISO 2731:1973 Dee shackles [Withdrawn: replaced with ISO 2415]
  • ISO 2732:1984 Steel and cast iron β€” Determination of phosphorus content β€” Phosphovanadomolybdate spectrophotometric method [Withdrawn: replaced with ISO 10714]
  • ISO 2733:1983 Vitreous and porcelain enamels β€” Apparatus for testing with acid and neutral liquids and their vapours [Withdrawn: replaced with ISO 28706-2]
  • ISO 2734:1997 Vitreous and porcelain enamels β€” Apparatus for testing with alkaline liquids [Withdrawn: replaced with ISO 28706-4]
  • ISO 2735:1973 Hermetically sealed metal food containers β€” Capacities and diameters of round open-top and vent hole cans for milk [Withdrawn: replaced with ISO 3004-6 (now replaced with ISO 10653 and 10654 and ISO/TR 11761, 11762, and 11776) and ISO/TR 8610]
  • ISO 2736 Concrete tests β€” Test specimens
    • ISO 2736-1 Part 1: Sampling of fresh concrete [Withdrawn: replaced with ISO 1920-1]
    • ISO 2736-2 Part 2: Making and curing of test specimens for strength tests [Withdrawn: replaced with ISO 1920-3]
  • ISO 2737:1973 Permeable sintered metal materials β€” Determination of oil content [Withdrawn: replaced with ISO 2738]
  • ISO 2738:1999 Sintered metal materials, excluding hardmetals β€” Permeable sintered metal materials β€” Determination of density, oil content and open porosity
  • ISO 2739:2012 Sintered metal bushings β€” Determination of radial crushing strength
  • ISO 2740:2009 Sintered metal materials, excluding hardmetals β€” Tensile test pieces
  • ISO 2741:1973 Zinc alloys β€” Complexometric determination of magnesium [Withdrawn without replacement]
  • ISO 2742:1998 Vitreous and porcelain enamels β€” Determination of resistance to boiling citric acid [Withdrawn: replaced with ISO 28706-2]
  • ISO 2743:1986 Vitreous and porcelain enamels β€” Determination of resistance to condensing hydrochloric acid vapour [Withdrawn: replaced with ISO 28706-2]
  • ISO 2744:1998 Vitreous and porcelain enamels β€” DDetermination of resistance to boiling water and water vapour [Withdrawn: replaced with ISO 28706-2]
  • ISO 2745:1998 Vitreous and porcelain enamels β€” Determination of resistance to hot sodium hydroxide [Withdrawn: replaced with ISO 28706-4]
  • ISO 2746:2015 Vitreous and porcelain enamels β€” High voltage test
  • ISO 2747:1998 Vitreous and porcelain enamels β€” Enamelled cooking utensils β€” Determination of resistance to thermal shock
  • ISO 2748:1983 Textile machinery and accessories β€” Lingoes for Jacquard weaving [Withdrawn without replacement]
  • ISO 2749:1973 Urea for industrial use β€” Measurement of the pH of a solution of urea of conventional concentration (100 g/L) β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2750:1974 Urea for industrial use β€” Measurement of colour in Hazen units (platinum-cobalt scale) of a urea-formaldehyde solution [Withdrawn without replacement]
  • ISO 2751:1973 Urea for industrial use β€” Determination of the buffer coefficient β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2752:1973 Urea for industrial use β€” Measurement of the variation of pH in the presence of formaldehyde β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2753:1973 Urea for industrial use β€” Determination of water content β€” Karl Fischer method [Withdrawn without replacement]
  • ISO 2754:1973 Urea for industrial use β€” Determination of biuret content β€” Photometric method [Withdrawn without replacement]
  • ISO 2755:1973 1,1,1- Trichloroethane for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2756:1973 Hexachlorobenzene for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2757:1973 1,2,4- Trichlorobenzene for industrial use β€” List of methods of test [Withdrawn without replacement]
  • ISO 2758:2014 Paper β€” Determination of bursting strength
  • ISO 2759:2014 Board β€” Determination of bursting strength
  • ISO 2760:1975 Crude sodium borates for industrial use β€” Determination of total aluminium content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2761:1975 Crude sodium borates for industrial use β€” Determination of total titanium content β€” Photometric method [Withdrawn without replacement]
  • ISO 2762:1973 Hydrochloric acid for industrial use β€” Determination of soluble sulphates β€” Turbidimetric method
  • ISO 2763 Data processing β€” Vocabulary β€” Part 02: Mathematics and logic, arithmetic and logical operations [Draft merged into ISO 2382]
  • ISO 2764:1974 Terms and symbols for flight dynamics β€” Concepts, quantities and symbols used in the study of aircraft stability and control [Withdrawn: replaced with ISO 1151-4]
  • ISO 2765:1974 Flight dynamics β€” Concepts, quantities and symbols β€” Quantities used in measurements [Withdrawn: replaced with ISO 1151-5]
  • ISO 2766:1973 Single lifting hooks with shank β€” Capacity up to 25 tonnes β€” Grades M, P, S (T, V) β€” Hammer and drop forged hooks [Withdrawn without replacement]
  • ISO 2767:1973 Surface treatments of metals β€” Anodic oxidation of aluminium and its alloys β€” Specular reflectance at 45 degrees β€” Total reflectance β€” Image clarity [Withdrawn: replaced with ISO 10215 and ISO 10216]
  • ISO 2768 General tolerances
    • ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications [Withdrawn: replaced with ISO 22081]
  • ISO 2769:1973 Modular units for machine tool construction β€” Wing bases for slide units
  • ISO 2770:1974 Tapping screws according to ISO/R 1478 to 1483 β€” Minimum and maximum lengths [Withdrawn without replacement]
  • ISO 2771:1980 Iron ores β€” Determination of aluminium content β€” Oxine gravimetric and titrimetric methods [Withdrawn without replacement]
  • ISO 2772:2019 Test conditions for box type vertical drilling machines β€” Testing of the accuracy
  • ISO 2773 Test conditions for pillar type vertical drilling machines
    • ISO 2773-1:1973 Part 1: Geometrical tests
    • ISO 2773-2:1973 Part 2: Practical test
  • ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
  • ISO 2776:1974 Modular co-ordination β€” Co-ordinating sizes for doorsets β€” External and internal [Withdrawn without replacement]
  • ISO 2777:1974 Modular co-ordination β€” Co-ordinating sizes for rigid flat sheet boards used in building [Withdrawn without replacement]
  • ISO/TR 2778:1977 Wrought aluminium and aluminium alloys β€” Drawn tubes β€” Mechanical properties [Withdrawn: replaced with ISO 6363-2]
  • ISO 2779:1973 Aluminium machining alloys β€” Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg [Withdrawn: replaced with ISO 209-1]
  • ISO 2780:2018 Milling cutters with tenon drive β€” Interchangeability dimensions for cutter arbors β€” Metric series
  • ISO 2781:2018 Rubber, vulcanized or thermoplastic β€” Determination of density
  • ISO 2782 Rubber, vulcanized or thermoplastic β€” Determination of permeability to gases
    • ISO 2782-1:2016 Part 1: Differential-pressure methods
    • ISO 2782-2:2018 Part 2: Equal-pressure method
  • ISO 2783:1975 Ebonite β€” Determination of hardness by means of a durometer [Withdrawn without replacement]
  • ISO 2784:1974 Continuous forms used for information processing – Sizes and sprocket feed holes
  • ISO 2785:1986 Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure [Withdrawn without replacement]
  • ISO 2786 Modular co-ordination β€” Internal wood doorsets β€” Principal dimensions [Rejected draft]
  • ISO 2787:1984 Rotary and percussive pneumatic tools β€” Performance tests
  • ISO 2788:1986 Documentation – Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
  • ISO 2789:2013 Information and documentation – International library statistics
  • ISO 2790:2020 Belt drives β€” V-belts for the automotive industry and corresponding pulleys β€” Dimensions
  • ISO 2791:1973 Bow shackles [Withdrawn: replaced with ISO 2415]
  • ISO 2792 Dentistry – Vocabulary – Part 2 [Draft merged into ISO 1942]
  • ISO 2793 Dentistry – Vocabulary – Part 3 [Draft merged into ISO 1942]
  • ISO 2794 Dentistry – Vocabulary – Part 4 [Draft merged into ISO 1942]
  • ISO 2795:2020 Plain bearings β€” Sintered bushes β€” Dimensions and tolerances
  • ISO 2796:1986 Cellular plastics, rigid β€” Test for dimensional stability
  • ISO 2797:2017 Textile glass β€” Rovings β€” Basis for a specification
  • ISO 2798:1974 Plastics β€” Designation of copolymer resins of vinyl chloride [Withdrawn: replaced with ISO 1060-1]
  • ISO/TR 2799:1978 Cellular plastics β€” Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load [Withdrawn: replaced with ISO 7616]
  • ISO 2800:1973 Photography β€” Expendable photoflash lamps β€” Definition and evaluation of flashability [Withdrawn without replacement]
  • ISO/TR 2801:2007 Clothing for protection against heat and flame β€” General recommendations for selection, care and use of protective clothing
  • ISO 2802:1974 Textile machinery and accessories β€” Plastic travellers for spinning and twisting [Withdrawn: replaced with ISO 96-2]
  • ISO 2803:1974 Photography β€” Silver-gelatin type microfilms β€” Processing and storage for archival purposes [Withdrawn: replaced with ISO 4331 and ISO 4332 (both replaced with ISO 10602, now replaced with ISO 18901), and ISO 5466 (now replaced with ISO 18911)]
  • ISO 2804:1996 Wire, bar or tube drawing dies β€” As-sintered pellets of hardmetal (carbide) β€” Dimensions
  • ISO 2805 Transliteration of the alphabets of non-Slavic languages using Cyrillic characters [Rejected draft]
  • ISO 2806:1994 Industrial automation systems – Numerical control of machines – Vocabulary
  • ISO 2808:2019 Paints and varnishes β€” Determination of film thickness
  • ISO 2809:1976 Paints and varnishes β€” Determination of light fastness of paints for interior use [Withdrawn: replaced with ISO 11341, now replaced with ISO 16474-(1-2)]
  • ISO 2810:2020 Paints and varnishes β€” Natural weathering of coatings β€” Exposure and assessment
  • ISO 2811 Paints and varnishes β€” Determination of density
    • ISO 2811-1:2016 Part 1: Pycnometer method
    • ISO 2811-2:2011 Part 2: Immersed body (plummet) method
    • ISO 2811-3:2011 Part 3: Oscillation method
    • ISO 2811-4:2011 Part 4: Pressure cup method
  • ISO 2812 Paints and varnishes β€” Determination of resistance to liquids
    • ISO 2812-1:2017 Part 1: Immersion in liquids other than water
    • ISO 2812-2:2018 Part 2: Water immersion method
    • ISO 2812-3:2019 Part 3: Method using an absorbent medium
    • ISO 2812-4:2017 Part 4: Spotting methods
    • ISO 2812-5:2018 Part 5: Temperature-gradient oven method
  • ISO 2813:2014 Paints and varnishes β€” Determination of gloss value at 20Β°, 60Β° and 85Β°
  • ISO 2814:1973 Paints and varnishes β€” Comparison of contrast ratio (hiding power) of paints of the same type and colour [Withdrawn without replacement]
  • ISO 2815:2003 Paints and varnishes β€” Buchholz indentation test
  • ISO 2816:1973 Fundamental characteristics of a system of shoe sizing to be known as Mondopoint [Withdrawn: replaced with ISO 9407]
  • ISO 2817:1999 Tobacco and tobacco products β€” Determination of silicated residues insoluble in hydrochloric acid
  • ISO 2818:2018 Plastics β€” Preparation of test specimens by machining
  • ISO 2819:2017 Metallic coatings on metallic substrates β€” Electrodeposited and chemically deposited coatings β€” Review of methods available for testing adhesion
  • ISO 2820:1974 Leather β€” Raw hides of cattle and horses β€” Method of trim
  • ISO 2821:1974 Leather β€” Raw hides of cattle and horses β€” Preservation by stack salting
  • ISO 2822 Raw cattle hides and calf skins
    • ISO 2822-1:1998 Part 1: Descriptions of defects
  • ISO 2823 Statistics β€” Vocabulary and symbols β€” Third series [Rejected draft merged into ISO 3534]
  • ISO 2824 Symbolic designation of direction of closing and faces of doors, windows and shutters β€” Part 2 [Rejected draft]
  • ISO 2825:1981 Spices and condiments β€” Preparation of a ground sample for analysis
  • ISO 2826:1974 Apricots β€” Guide to cold storage
  • ISO 2827:1988 Photography β€” Electronic flash equipment β€” Determination of light output and performance
  • ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of fluorine content β€” Alizarin complexone and lanthanum chloride spectrophotometric method
  • ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of phosphorus content β€” Reduced phosphomolybdate spectrophotometric method
  • ISO 2830:1973 Cryolite, natural and artificial β€” Determination of aluminium content β€” Atomic absorption method
  • ISO 2831:1973 Sodium fluoride for industrial use β€” Determination of water-insoluble matter
  • ISO 2832:1973 Sodium fluoride for industrial use β€” Determination of moisture content
  • ISO 2833:1973 Sodium fluoride for industrial use β€” Determination of fluorine content β€” Modified Willard-Winter method
  • ISO 2834 Graphic technology β€” Laboratory preparation of test prints
  • ISO 2834-1:2020 Part 1: Paste inks
  • ISO 2834-2:2015 Part 2: Liquid printing inks
  • ISO 2834-3:2008 Part 3: Screen printing inks
  • ISO 2835:1974 Prints and printing inks β€” Assessment of light fastness [Withdrawn without replacement]
  • ISO 2836:2021 Graphic technology β€” Prints and printing inks β€” Assessment of resistance of prints to various agents
  • ISO 2837:1996 Graphic technology β€” Prints and printing inks β€” Assessment of resistance to solvents [Withdrawn: replaced with ISO 2836]
  • ISO 2838:1974 Prints and printing inks β€” Assessment of resistance to alkalis [Withdrawn: replaced with ISO 2836]
  • ISO 2839:1974 Prints and printing inks β€” Assessment of resistance to soaps [Withdrawn: replaced with ISO 2836]
  • ISO 2840:1974 Prints and printing inks β€” Assessment of resistance of prints to detergents [Withdrawn: replaced with ISO 2836]
  • ISO 2841:1974 Prints and printing inks β€” Assessment of resistance of prints to cheese [Withdrawn: replaced with ISO 2836]
  • ISO 2842:1974 Prints and printing inks β€” Assessment of resistance of prints to edible oils [Withdrawn: replaced with ISO 2836]
  • ISO 2843:1974 Prints and printing inks β€” Assessment of resistance of prints to impregnation by wax or paraffin wax [Withdrawn: replaced with ISO 2836]
  • ISO 2844:1974 Prints and printing inks β€” Assessment of resistance of prints to spices [Withdrawn: replaced with ISO 2836]
  • ISO 2845:1975 Set of printing inks for letterpress printing β€” Colorimetric characteristics [Withdrawn: replaced with ISO 2846-1]
  • ISO 2846 Graphic technology β€” Colour and transparency of printing ink sets for four-colour printing (originally Set of printing inks for offset printing β€” Colorimetric characteristics)
    • ISO 2846-1:2017 Part 1: Sheet-fed and heat-set web offset lithographic printing
    • ISO 2846-2:2007 Part 2: Coldset offset lithographic printing
  • ISO 2848:1984 Building construction – Modular coordination – Principles and rules
  • ISO 2849 Building construction – Modular coordination – Modules for vertical dimensions [Rejected draft]
  • ISO 2850:1973 Potassium sulphate for industrial use β€” Determination of loss of mass at 105 degrees C [Withdrawn without replacement]
  • ISO 2851:1993 Stainless steel bends and tees for the food industry [Withdrawn without replacement]
  • ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry [Withdrawn without replacement]
  • ISO 2853:1993 Stainless steel threaded couplings for the food industry [Withdrawn without replacement]
  • ISO 2854:1976 Statistical interpretation of data – Techniques of estimation and tests relating to means and variances
  • ISO 2855:1976 Radioactive materials β€” Packagings β€” Test for contents leakage and radiation leakage [Withdrawn without replacement]
  • ISO 2856:1981 Elastomers β€” General requirements for dynamic testing [Withdrawn: replaced with ISO 4664]
  • ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches β€” Manufacturing tolerances on the threaded portion
  • ISO 2858:1975 End-suction centrifugal pumps (rating 16 bar) β€” Designation, nominal duty point and dimensions
  • ISO 2859 Sampling procedures for inspection by attributes
    • ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-2:2020 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
    • ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
    • ISO 2859-4:2020 Part 4: Procedures for assessment of declared quality levels
    • ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes [Withdrawn: replaced with ISO 28590]
  • ISO 2860:1992 Earth-moving machinery β€” Minimum access dimensions
  • ISO 2861:2020 Vacuum technology β€” Dimensions of clamped-type quick-release couplings
  • ISO 2862:1974 Cinematography β€” Single-track magnetic sound record on 35 mm motion-picture films β€” Position and dimensions [Withdrawn without replacement]
  • ISO 2863:1973 Cinematography β€” Motion-picture camera cartridge, 8 mm Type S Model II β€” Run length of film β€” Dimensions and specifications [Withdrawn without replacement]
  • ISO 2864:1974 Interchangeable magnetic six-disk pack β€” Physical and magnetic characteristics [Withdrawn without replacement]
  • ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium β€” Determination of boron content β€” Curcumin spectrophotometric method
  • ISO 2866:1974 Sulphur for industrial use β€” Determination of total carbon content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2867:2011 Earth-moving machinery β€” Access systems
  • ISO 2868:1973 Surface active agents β€” Detergents β€” Anionic-active matter stable to acid hydrolysis β€” Determination of trace amounts
  • ISO 2869:1973 Surface active agents β€” Detergents β€” Anionic-active matter hydrolyzable under alkaline conditions β€” Determination of hydrolyzable and non-hydrolyzable anionic-active matter
  • ISO 2870:2009 Surface active agents β€” Detergents β€” Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
  • ISO 2871 Surface active agents β€” Detergents β€” Determination of cationic-active matter content
    • ISO 2871-1:2010 Part 1: High-molecular-mass cationic-active matter
    • ISO 2871-2:2010 Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • ISO 2872:1985 Packaging β€” Complete, filled transport packages β€” Compression test [Withdrawn: replaced with ISO 12048]
  • ISO 2873:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Low pressure test
  • ISO 2874:1985 Packaging β€” Complete, filled transport packages β€” Stacking test using compression tester [Withdrawn: replaced with ISO 12048]
  • ISO 2875:2000 Packaging β€” Complete, filled transport packages and unit loads β€” Water-spray test
  • ISO 2876:1985 Packaging β€” Complete, filled transport packages β€” Rolling test
  • ISO 2877:1974 Sulphuric acid for industrial use β€” Determination of chlorides content β€” Potentiometric method [Withdrawn without replacement]
  • ISO 2878:2017 Rubber, vulcanized or thermoplastic β€” Antistatic and conductive products β€” Determination of electrical resistance
  • ISO 2879:1975 Glycerine for industrial use β€” Determination of glycerol content β€” Titrimetric method [Withdrawn without replacement]
  • ISO 2880 Determination of Sound Power Emitted by Sma 11 Noise Sources in Reverberation Rooms β€” Part 1: Broad Band Sources [Rejected draft]
  • ISO 2881:1992 Tobacco and tobacco products β€” Determination of alkaloid content β€” Spectrometric method
  • ISO 2882:1979 Rubber, vulcanized β€” Antistatic and conductive products for hospital use β€” Electrical resistance limits [Withdrawn without replacement]
  • ISO 2883:1980 Rubber, vulcanized β€” Antistatic and conductive products for industrial use β€” Electrical resistance limits [Withdrawn without replacement]
  • ISO 2884 Paints and varnishes β€” Determination of viscosity using rotary viscometers
    • ISO 2884-1:1999 Part 1: Cone-and-plate viscometer operated at a high rate of shear
    • ISO 2884-2:2003 Part 2: Disc or ball viscometer operated at a specified speed
  • ISO 2885:1973 Acetaldehyde for industrial use β€” Determination of total content of carbonyl compounds β€” Volumetric method [Withdrawn without replacement]
  • ISO 2886:1973 Acetaldehyde for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 2887:1973 secButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2888:1973 Furfural for industrial use β€” Determination of acidity to phenolphthalein β€” Volumetric method [Withdrawn without replacement]
  • ISO 2889:2021 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
  • ISO 2890:1973 Road vehicles β€” Vacuum braking for caravans and light trailers [Withdrawn without replacement]
  • ISO 2891:1977 Modular units for machine tool construction β€” Centre bases and columns [Withdrawn without replacement]
  • ISO 2892:2007 Austenitic cast irons β€” Classification
  • ISO 2893 General Methods of Test for Pigments β€” Comparison of Ease of Dispersion (Oscillatory Shaking Method) [Rejected Draft]
  • ISO 2894:1980 Embossed credit cards β€” Specifications, numbering system and registration procedure [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
  • ISO 2895:1974 Cinematography β€” Screen luminance for review room projection of motion-picture film intended for indoor theatres [Withdrawn: replaced with ISO 2910]
  • ISO 2896:2001 Rigid cellular plastics β€” Determination of water absorption
  • ISO 2897:1976 Plastics β€” Designation of impact-resistant polystyrenes [Withdrawn without replacement]
  • ISO 2898 Plastics β€” Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials
    • ISO 2898-1:1996 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24023-1]
    • ISO 2898-2:2008 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24023-2]
  • ISO 2899:1974 Sulphuric acid and oleums for industrial use β€” Determination of ammoniacal nitrogen content β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2900:1973 Potassium Hydroxide for Industrial Use – Determination of Carbon Dioxide Content – Titrimetric Method [Withdrawn without replacement]
  • ISO 2901:2016 ISO metric trapezoidal screw threads β€” Basic and design profiles
  • ISO 2902:2016 ISO metric trapezoidal screw threads β€” General plan
  • ISO 2903:2016 ISO metric trapezoidal screw threads β€” Tolerances
  • ISO 2904:2020 ISO metric trapezoidal screw threads β€” Basic dimensions
  • ISO 2905:1985 Modular units for machine tool construction β€” Spindle noses and adjustable adaptors for multi-spindle heads
  • ISO 2906:2002 Cinematography β€” Image area produced by camera aperture on 35 mm motion-picture film β€” Position and dimensions
  • ISO 2907:2002 Cinematography β€” Maximum projectable image area on 35 mm motion-picture film β€” Position and dimensions
  • ISO 2908:1974 Petroleum waxes β€” Determination of oil content [Withdrawn without replacement]
  • ISO 2909:2002 Petroleum products β€” Calculation of viscosity index from kinematic viscosity
  • ISO 2910:2018 Cinematography β€” Screen luminance and chrominance for the projection of film motion pictures
  • ISO 2911:2004 Sweetened condensed milk β€” Determination of sucrose content β€” Polarimetric method
  • ISO 2912:1973 Modular units for machine tool construction β€” Multi-spindle heads β€” Casing and input drive shaft dimensions
  • ISO 2913:1975 Wool β€” Colorimetric determination of cystine plus cysteine in hydrolysates
  • ISO 2915:1975 Wool β€” Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry
  • ISO 2916:1975 Wool β€” Determination of alkali content
  • ISO 2917:1999 Meat and meat products β€” Measurement of pH β€” Reference method
  • ISO 2918:1975 Meat and meat products β€” Determination of nitrite content (Reference method)
  • ISO 2919:2012 Radiological protection β€” Sealed radioactive sources β€” General requirements and classification
  • ISO 2920:2004 Whey cheese β€” Determination of dry matter (Reference method)
  • ISO 2921:2019 Rubber, vulcanized β€” Determination of low-temperature characteristics β€” Temperature-retraction procedure (TR test)
  • ISO 2922:2020 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
  • ISO 2923:1996 Acoustics – Measurement of noise on board vessels
  • ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals β€” Interchangeability dimensions of the drive β€” Saw diameter range 224 to 2 240 mm
  • ISO 2925:1973 Aluminium fluoride for industrial use – Preparation and storage of test samples [Withdrawn without replacement]
  • ISO 2926:2013 Aluminium oxide used for the production of primary aluminium β€” Particle size analysis for the range 45 Β΅m to 150 Β΅m β€” Method using electroformed sieves
  • ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium β€” Sampling
  • ISO 2928:2021 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) β€” Specification
  • ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck β€” Specification
  • ISO 2930:2017 Rubber, raw natural β€” Determination of plasticity retention index (PRI)
  • ISO 2931:2017 Anodizing of aluminium and its alloys β€” Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
  • ISO 2932:1981 Anodizing of aluminium and its alloys β€” Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution [Withdrawn without replacement]
  • ISO 2933:1974 Bonded abrasive products β€” Grinding wheel dimensions (Part 3) [Withdrawn: replaced with ISO 603-(1-16)]
  • ISO 2934:1973 Modular units for machine tool construction β€” Wing base for columns
  • ISO 2935:1974 Circular saw blades for woodworking β€” Dimensions
  • ISO 2936:2014 Assembly tools for screws and nuts β€” Hexagon socket screw keys
  • ISO 2937:1974 Plain end seamless steel tubes for mechanical application [Withdrawn without replacement]
  • ISO 2938:1974 Hollow steel bars for machining [Withdrawn without replacement]
  • ISO 2939:2015 Cinematography β€” Picture image area on 35 mm motion-picture release prints β€” Position and dimensions and analogue and digital photographic sound to picture record displacement
  • ISO 2940 Milling cutters mounted on centring arbors having a 7/24 taper
    • ISO 2940-1:1974 Fitting dimensions β€” Centring arbors
    • ISO 2940-2:1974 Inserted tooth cutters
  • ISO 2941:2009 Hydraulic fluid power β€” Filter elements β€” Verification of collapse/burst pressure rating
  • ISO 2942:2018 Hydraulic fluid power β€” Filter elements β€” Verification of fabrication integrity and determination of the first bubble point
  • ISO 2943:1998 Hydraulic fluid power β€” Filter elements β€” Verification of material compatibility with fluids
  • ISO 2944:2000 Fluid power systems and components β€” Nominal pressures
  • ISO 2945 Bases for the design of structures [Rejected draft, but partly covered by ISO 4356]
  • ISO 2946 Acoustics β€” Determination of sound power levels of noise sources β€” Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Draft renamed ISO 3742]
  • ISO 2947:1973 Textiles β€” Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System
  • ISO 2948 Brown coals and lignites β€” Extensive method of analysis of ash [Rejected draft]
  • ISO 2949 Brown coals and lignites β€” Analysis of ash [Rejected draft]
  • ISO 2950:1974 Brown coals and lignites β€” Classification by types on the basis of total moisture content and tar yield
  • ISO 2951:2019 Rubber, vulcanized rubber β€” Determination of insulation resistance
  • ISO 2953:1999 Mechanical vibration β€” Balancing machines β€” Description and evaluation [Withdrawn: replaced with ISO 21940-21]
  • ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
  • ISO 2955:1983 Information processing β€” Representation of SI and other units in systems with limited character sets [Withdrawn without replacement]
  • ISO 2958:1973 Road vehicles β€” Exterior protection for passenger cars
  • ISO 2959:2011 Textiles β€” Woven fabric descriptions
  • ISO 2960:1974 Textiles β€” Determination of bursting strength and bursting distension β€” Diaphragm method [Withdrawn: replaced with ISO 13938-1]
  • ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium β€” Determination of an adsorption index
  • ISO 2962:2010 Cheese and processed cheese products β€” Determination of total phosphorus content β€” Molecular absorption spectrometric method
  • ISO/TS 2963:2006 Cheese and processed cheese products β€” Determination of citric acid content β€” Enzymatic method
  • ISO 2964:1985 Aerospace β€” Tubing β€” Outside diameters and thicknesses β€” Metric dimensions
  • ISO 2965:2019 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability β€” Determination of air permeability
  • ISO 2966:1988 Cinematography β€” 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) β€” Cutting and perforating dimensions [Withdrawn without replacement]
  • ISO 2967:1982 Cinematography β€” Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0) β€” Positions and width dimensions [Withdrawn without replacement]
  • ISO 2968:1981 Cinematography β€” Recorded characteristics for magnetic sound record on 8 mm Type S motion- picture prints and full-coat magnetic film perforated 8 mm Type S β€” Specifications [Withdrawn without replacement]
  • ISO 2969:2015 Cinematography β€” B-chain electro-acoustic response of motion-picture control rooms and indoor theatres β€” Specifications and measurements
  • ISO 2970:1974 Cheese β€” determination of chloride content [Withdrawn without replacement]
  • ISO 2971:2013 Cigarettes and filter rods β€” Determination of nominal diameter β€” Method using a non-contact optical measuring apparatus
  • ISO 2972:1979 Numerical control of machines – Symbols
  • ISO 2973 Freight containers [Rejected Draft[
  • ISO 2974:2018 Diesel engines β€” 60Β° female cones for high-pressure fuel injection components
  • ISO 2975 Measurement of water flow in closed conduits – Tracer methods
    • ISO 2975-1:1974 Part 1: General
    • ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
    • ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
    • ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
    • ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
  • ISO 2976:2005 Coated abrasives β€” Abrasive belts β€” Selection of width/length combinations
  • ISO 2977:1997 Petroleum products and hydrocarbon solvents β€” Determination of aniline point and mixed aniline point
  • ISO 2979 Aircraft β€” Design of intermodal containers [Rejected draft]
  • ISO 2982 Rolling bearings β€” Accessories
    • ISO 2982-1:2013 Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
    • ISO 2982-2:2013 Part 2: Dimensions for locknuts and locking devices
  • ISO 2983:1975 Rolling bearings β€” Locknuts, wide series, and lockwashers with bent inner tab [Withdrawn without replacement]
  • ISO 2990:1974 Nitric acid for industrial use β€” Evaluation of the nitric acid concentration by measurement of density [Withdrawn without replacement]
  • ISO 2991:1974 Nitric acid for industrial use β€” Determination of ammoniacal nitrogen content β€” Spectrophotometric method [Withdrawn without replacement]
  • ISO 2992:1974 Ammonium sulphate for industrial use β€” Determination of iron content β€” 2,2'- Bipyridyl photometric method
  • ISO 2993:1974 Ammonium sulphate for industrial use β€” Determination of free acidity β€” Titrimetric method
  • ISO 2994:1974 Ammonium sulphate for industrial use β€” Determination of matter insoluble in water β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2995:1974 Ammonium nitrate for industrial use β€” Determination of matter insoluble in water β€” Gravimetric method [Withdrawn without replacement]
  • ISO 2996:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use β€” Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
  • ISO 2997:1974 Phosphoric acid for industrial use β€” Determination of sulphate content β€” Method by reduction and titrimetry
  • ISO 2998:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use β€” Determination of orthophosphate content β€” Photometric method using the reduced molybdophosphate [Withdrawn without replacement]
  • ISO 2999:1974 Sodium pyrophosphate for industrial use β€” Estimation of pyrophosphate content β€” Potentiometric method [Withdrawn without replacement]

See also

Notes

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".

References

  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
  3. ^ Mechanical Engineering. The Journal of the American Society of Mechanical Engineers (1975) Vol. 97. pg. 78
  4. ^ Der Praktiker, Volumes 30-31 (1978). Deutscher Verband fΓΌr Schweisstechnik. pg. 209.
  5. ^ Welding Research Abroad (1975). Welding Research Council (U.S.). pg. 20.

External links


Videos

Youtube | Vimeo | Bing

Websites

Google | Yahoo | Bing

Encyclopedia

Google | Yahoo | Bing

Facebook