The standards are protected by
copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and
IEC's Joint Technical Committee 1 (
JTC 1) have been made freely and publicly available.[2]
ISO 14000 β ISO 14999
ISO 14000 Environmental management systems (This is a set of standards, rather than a single standard)
ISO 14001:2015 Environmental management systems β Requirements with guidance for use
ISO 14004:2016 Environmental management systems β General guidelines on implementation
ISO 14005:2010 Environmental management systems β Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
ISO 14006:2011 Environmental management systems β Guidelines for incorporating ecodesign
ISO 14015:2022 Environmental management β Guidelines for environmental due diligence assessment
ISO 14020:2000 Environmental labels and declarations β General principles
ISO 14031 Environmental management - Environmental performance evaluation β Guidelines
ISO 14045:2012 describes the principles, requirements and guidelines for
eco-efficiency assessment for product systems [3]
ISO 14046:2014 - Environmental management β
Water footprint β Principles, requirements and guidelines
ISO 14117:2012 Active implantable medical devices β Electromagnetic compatibility β EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
ISO 14132 Optics and photonics - Vocabulary for telescopic systems
ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
ISO 14132-3:2014 Part 3: Terms for telescopic sights
ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
ISO 14132-5:2008 Part 5: Terms for night vision devices
ISO/IEC 14136:1995 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Identification supplementary services
ISO 14139:2000 Hydrometric determinations β Flow measurements in open channels using structures β Compound gauging structures
ISO 14242 Implants for surgery β Wear of total hip-joint prostheses
ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2:2016 Part 2: Methods of measurement
ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
ISO 14243 Implants for surgery β Wear of total knee-joint prostheses
ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2016 Part 2: Methods of measurement
ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO/IEC 14251:1995 Information technology β Data interchange on 12.7 mm 36-track magnetic tape cartridges
ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO/TS 14265:2011 Health Informatics β Classification of purposes for processing personal health information
ISO/TR 14283:2004 Implants for surgery β Fundamental principles
ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
ISO/TR 14292:2012 Health informatics β Personal health records β Definition, scope and context
ISO 14296:2016 Intelligent transport systems β Extension of map database specifications for applications of cooperative ITS
ISO 14302:2002 Space systems β Electromagnetic compatibility requirements
ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO/IEC TR 14369:2018 Information technology β Programming languages, their environments and system software interfaces β Guidelines for the preparation of language-independent service specifications (LISS)
ISO 14405 Geometrical product specifications (GPS) β Dimensional tolerancing
ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
ISO 14405-3:2016 Part 3: Angular sizes
ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
ISO 14408:2016 Tracheal tubes designed for laser surgery β Requirements for marking and accompanying information
ISO 14416:2003 Information and documentation β Requirements for binding of books, periodicals, serials and other paper documents for archive and library use β Methods and materials
ISO/IEC 14417:1999 Information technology β Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
ISO/TS 14441:2013 Health informatics β Security and privacy requirements of EHR systems for use in conformity assessment
ISO 14451 Pyrotechnic articles β Pyrotechnic articles for vehicles
ISO 14451-1:2013 Part 1: Terminology
ISO 14452:2012 Network services billing β Requirements
ISO 14461 Milk and milk products β Quality control in microbiological laboratories
ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
ISO/IEC 14462:2010 Information technology - Open-edi reference model
ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
ISO/IEC 14474:1998 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Functional requirements for static circuit-mode inter-PINX connections
ISO/IEC TR 14475:2001 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Architecture and scenarios for Private Integrated Services Networking
ISO/IEC 14476 Information technology β Enhanced communications transport protocol
ISO/IEC 14476-1:2002 Specification of simplex multicast transport
ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
ISO/IEC 14476-3:2008 Specification of duplex multicast transport
ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects (PREMO)
ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
ISO/IEC 14478-2:1998 Part 2: Foundation Component
ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
ISO/IEC 14495-1:1999 Baseline
ISO/IEC 14495-2:2003 Extensions
ISO/IEC 14496 Information technology β Coding of audio-visual objects
ISO 14500:2003 Textile machinery and accessories β Harnesses for Jacquard weaving machines β Vocabulary
ISO 14509 Small craft β Airborne sound emitted by powered recreational craft
ISO 14509-1:2008 Part 1: Pass-by measurement procedures
ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
ISO 14511:2001 Measurement of fluid flow in closed conduits β Thermal mass flowmeters
ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX) - Test methods for measuring conformance to POSIX
ISO/IEC 14515-1:2000 Part 1: System interfaces
ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2.6 GB per cartridge
ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
ISO 14532:2014 Natural gas β Vocabulary
ISO 14533 Processes, data elements and documents in commerce, industry and administration β Long term signature profiles
ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (
CAdES)
ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (
XAdES)
ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (
PAdES)
ISO 14534:2011 Ophthalmic optics β Contact lenses and contact lens care products β Fundamental requirements
ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
ISO/IEC 14543 Information technology β Home Electronic System (HES) architecture
ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers β Application layer for network based control of HES Class 1
ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers β Transport, network and general parts of data link layer for network based control of HES Class 1
ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
ISO/IEC 14543-3-4:2007 Part 3-4: System management β Management procedures for network based control of HES Class 1
ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers β Power line for network based control of HES Class 1
ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers β Network based on HES Class 1, twisted pair
ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers β Radio frequency for network based control of HES Class 1
ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting β Architecture and lower layer protocols
ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting β Architecture and lower layer protocols
ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers β Application layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers β Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 β Core protocol
ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Basic application
ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Device validation
ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Device type
ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Service type
ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing β Remote access system architecture
ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Remote access core protocol
ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 β Remote access service platform
ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Application profile β AV profile
ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Application profile β File profile
ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus (STbus) - Logical Layer
ISO 14580:2011 Hexalobular socket cheese head screws
ISO 14588:2000 Blind rivets - Terminology and definitions
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO/IEC 14651:2020 Information technology β International string ordering and comparison β Method for comparing character strings and description of the common template tailorable ordering
ISO/IEC 14662:2010 Information technology β Open-edi reference model
ISO/TR 14685:2001 Hydrometric determinations β Geophysical logging of boreholes for hydrogeological purposes β Considerations and guidelines for making measurements
ISO 14686:2003 Hydrometric determinations β Pumping tests for water wells β Considerations and guidelines for design, performance and use
ISO 14695:2003 Industrial fans β Method of measurement of fan vibration
ISO 14698 Cleanrooms and associated controlled environments β Biocontamination control
ISO 14698-1:2003 General principles and methods
ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
ISO/IEC 14699:1997 Information technology β Open Systems Interconnection β Transport Fast Byte Protocol
ISO/IEC 14700:1997 Information technology β Open Systems Interconnection β Network Fast Byte Protocol
ISO 14708 Implants for surgery β Active implantable medical devices
ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
ISO 14708-2:2012 Part 2: Cardiac pacemakers
ISO 14708-3:2017 Part 3: Implantable neurostimulators
ISO 14708-4:2008 Part 4: Implantable infusion pumps
ISO 14708-5:2010 Part 5: Circulatory support devices
ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling (CPC) for applications
ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
ISO 14722:1998 Moped and moped-rider kinematics β Vocabulary
ISO 14726:2008 Ships and marine technology β Identification colours for the content of piping systems
ISO 14729:2001 Ophthalmic optics β Contact lens care products β Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 14730:2014 Ophthalmic optics β Contact lens care products β Antimicrobial preservative efficacy testing and guidance on determining discard date
ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
ISO 14739-1:2014 Part 1: PRC 10001
ISO/TR 14742:2010 Financial services β Recommendations on cryptographic algorithms and their use
ISO/IEC 14750:1999 Information technology β Open Distributed Processing β Interface Definition Language
ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
ISO/IEC 14754:1999 Information technology β Pen-Based Interfaces β Common gestures for Text Editing with Pen-Based Systems
ISO/IEC 14755:1997 Information technology β Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1.3 GB per cartridge
ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
ISO/IEC 14763-1:1999 Part 1: Administration
ISO/IEC 14763-2:2012 Part 2: Planning and installation
ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol (TCP)
ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
ISO 14837 Mechanical vibration β Ground-borne noise and vibration arising from rail systems
ISO 14837-1:2005 Part 1: General guidance
ISO/TS 14837-31:2017 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
ISO 14839-1:2002 Part 1: Vocabulary
ISO 14839-2:2004 Part 2: Evaluation of vibration
ISO 14839-3:2006 Part 3: Evaluation of stability margin
ISO 14839-4:2012 Part 4: Technical guidelines
ISO/IEC 14840:1996 Information technology β 12.65 mm wide magnetic tape cartridge for information interchange β Helical scan recording β Data-D3-1 format
ISO/IEC 14841:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call offer supplementary service
ISO/IEC 14842:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Do not disturb and do not disturb override supplementary services
ISO/IEC 14843:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Offer supplementary service
ISO/IEC 14844:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Do Not Disturb and Do Not Disturb Override supplementary services
ISO/IEC 14845:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call intrusion supplementary service
ISO/IEC 14846:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Intrusion supplementary service
ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions β Method by analysis of evolved carbon dioxide
ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
ISO 15001:2010 Anaesthetic and respiratory equipment β Compatibility with oxygen
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ISO 15004 Ophthalmic instruments β Fundamental requirements and test methods
ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
ISO 15004-2:2007 Part 2: Light hazard protection
ISO 15006:2011 Road vehicles β Ergonomic aspects of transport information and control systems β Specifications for in-vehicle auditory presentation
ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles β Requirements and test methods
ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
ISO/IEC 15018:2004 Information technology - Generic cabling for homes
ISO 15022 Securities β Scheme for messages (Data Field Dictionary)
ISO/IEC 15026 Systems and software engineeringβSystems and software assurance
ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
ISO/IEC 15026-2:2011 Part 2: Assurance case
ISO/IEC 15026-3:2015 Part 3: System integrity levels
ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
ISO 15031 Road vehicles β Communication between vehicle and external equipment for emissions-related diagnostics
ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
ISO 15032:2000 Prostheses β Structural testing of hip units
ISO/IEC 15041:1997 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 MB per cartridge
ISO/IEC TR 15044:2000 Information technology - Terminology for the Home Electronic System (HES)
ISO/IEC 15045 Information technology - Home Electronic System (HES) gateway
ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
ISO/IEC 15049:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Advice of charge supplementary services
ISO/IEC 15050:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Advice Of Charge supplementary services
ISO/IEC 15051:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Recall supplementary service
ISO/IEC 15052:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Recall supplementary service
ISO/IEC 15053:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call Interception additional network feature
ISO/IEC 15054:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Interception additional network feature
ISO/IEC 15055:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Transit counter additional network feature
ISO/IEC 15056:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Transit counter additional network feature
ISO/IEC 15067 Information technology - Home Electronic System (HES) application model[Note 4]
ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
ISO 15075:2003 Transport information and control systems β In-vehicle navigation systems β Communications message set requirements
ISO 15081:2011 Agricultural equipment - Graphical symbols for pressurized irrigation systems
ISO 15118 Road vehicles - Vehicle to grid communication interface
ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials β Requirements and test methods
ISO 15142 Implants for surgery β Metal intramedullary nailing systems
ISO 15142-1:2003 Part 1: Intramedullary nails
ISO 15142-2:2003 Part 2: Locking components
ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
ISO 15143 Earth-moving machinery and mobile road construction machinery β Worksite data exchange
ISO 15143-1:2010 Part 1: System architecture
ISO 15143-2:2010 Part 2: Data dictionary
ISO/TS 15143-3:2016 Part 3: Telematics data
ISO/IEC 15145:1997 Information technology - Programming languages -
FORTH
ISO/IEC 15149:2011 Information technology β Telecommunications and information exchange between systems β Magnetic field area network (MFAN)
ISO/IEC 15149-1:2014 Part 1: Air interface
ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
ISO 15174:2012 Milk and milk products β Microbial coagulants β Determination of total milk-clotting activity
ISO 15188:2001 Project management guidelines for terminology standardization
ISO 15189:2012 Medical laboratories β Particular requirements for quality and competence
ISO/IEC 15200:1996 Information technology - Adaptive Lossless Data Compression algorithm (ALDC)
ISO/IEC 15205:2000 SBus - Chip and module interconnect bus
ISO 15212 Oscillation-type density meters
ISO 15212-1:1998 Part 1: Laboratory instruments
ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
ISO 15213:2003 Microbiology of food and animal feeding stuffs β Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
ISO 15214:1998 Microbiology of food and animal feeding stuffs β Horizontal method for the enumeration of mesophilic lactic acid bacteria β Colony-count technique at 30 degrees C
ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 4]
ISO 15216-1:2017 Part 1: Method for quantification
ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
ISO 15223 Medical devices β Symbols to be used with medical device labels, labelling, and information to be supplied
ISO 15223-1:2016 Part 1: General requirements
ISO 15223-2:2010 Part 2: Symbol development, selection and validation
ISO 15225:2016 Medical devices β Quality management β Medical device nomenclature data structure
ISO 15226:1999 Technical product documentation β Life cycle model and allocation of documents
ISO 15230:2007 Mechanical vibration and shock β Coupling forces at the manβmachine interface for hand-transmitted vibration
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO 15241:2012 Rolling bearings - Symbols for physical quantities
ISO 15253:2000 Ophthalmic optics and instruments β Optical devices for enhancing low vision
ISO 15254:2009 Ophthalmic optics and instruments β Electro-optical devices for enhancing low vision
ISO 15261:2004 Vibration and shock generating systems - Vocabulary
ISO/IEC TR 15285:1998 Information technology - An operational model for characters and glyphs
ISO/IEC 15286:1999 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 5.2 GB per cartridge
ISO/IEC/IEEE 15288:2015 Systems and software engineering β System life cycle processes
ISO/IEC/IEEE 15289:2017 Systems and software engineering β Content of life-cycle information items (documentation)
ISO/IEC TR 15294:2000 Information technology β Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
ISO 15296:2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment
ISO/TR 15300:2001 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
ISO/IEC 15307:1997 Information technology β Data interchange on 12.7 mm 128-track magnetic tape cartridges β DLT 4 format
ISO 15309:2013 Implants for surgery β Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
ISO/PAS 15339 Graphic technology - Printing from digital data across multiple technologies
ISO/PAS 15339-1:2015 Part 1: Principles
ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
ISO 15367 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront
ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 15374:1998 Implants for surgery β Requirements for production of forgings
ISO 15375:2010 Medical infusion bottles β Suspension devices for multiple use β Requirements and test methods
ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices β Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
ISO 15378:2017 Primary packaging materials for medicinal products β Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
ISO 15394:2009 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
ISO 15403 Natural gas β Natural gas for use as a compressed fuel for vehicles
ISO 15403-1:2006 Part 1: Designation of the quality
ISO/TR 15403-2:2006 Part 2: Specification of the quality
ISO/IEC 15404:2000 Information technology β Office machines β Minimum information to be included in specification sheets β Facsimile equipment
ISO/IEC 15408 Information technology β Security techniques β Evaluation criteria for IT security
ISO/IEC 15408-1:2009 Part 1: Introduction and general model
ISO/IEC 15408-2:2008 Part 2: Security functional components
ISO/IEC 15408-3:2008 Part 3: Security assurance components
ISO/IEC TR 15410:1998 Information technology β Telecommunications and information exchange between systems β PISN mobility-general principles and services aspects
ISO/IEC 15411:1999 Information technology - Segmented keyboard layouts
ISO/IEC 15412:1999 Information technology - Portable computer keyboard layouts
ISO/IEC TR 15413:2001 Information technology - Font services - Abstract service definition
ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15415:2011 Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols
ISO/IEC 15416:2016 Automatic identification and data capture techniques -
Bar code print quality test specification - Linear symbols
ISO/IEC 15417:2007 Information technology - Automatic identification and data capture techniques -
Code 128 bar code symbology specification
ISO/IEC 15418:2016 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
ISO/IEC 15419:2009 Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing
ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
ISO/IEC 15426 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification
ISO/IEC 15426-1:2006 Part 1: Linear symbols
ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
ISO/IEC 15428:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
ISO/IEC 15429:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
ISO/IEC 15430:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless terminal call handling additional network features
ISO/IEC 15431:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless terminal call handling additional network features
ISO/IEC 15432:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless Terminal Authentication supplementary services (WTAT and WTAN)
ISO/IEC 15433:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless Terminal Authentication supplementary services
ISO/IEC 15434:2006 Information technology β Automatic identification and data capture techniques β Syntax for high-capacity ADC media
ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
ISO/IEC 15438:2015 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification
ISO/IEC TR 15440:2016 Information technology - Future keyboards and other input devices and entry methods
ISO/IEC 15457-1:2008 Part 1: Physical characteristics
ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
ISO/IEC 15457-3:2008 Part 3: Test methods
ISO/IEC 15459 Information technology - Automatic identification and data capture techniques - Unique identification
ISO/IEC 15459-1:2014 Part 1: Individual transport units
ISO/IEC 15459-2:2015 Part 2: Registration procedures
ISO/IEC 15459-3:2014 Part 3: Common rules
ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
ISO/IEC 15459-6:2014 Part 6: Groupings
ISO 15469:2004 Spatial distribution of daylight β CIE standard general sky
ISO/IEC 15474 Information technology - CDIF framework
ISO/IEC 15474-1:2002 Part 1: Overview
ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
ISO/IEC 15475 Information technology - CDIF transfer format
ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
ISO/IEC 15476 Information technology - CDIF semantic metamodel
ISO/IEC 15476-1:2002 Part 1: Foundation
ISO/IEC 15476-2:2002 Part 2: Common
ISO/IEC 15476-3:2006 Part 3: Data definitions
ISO/IEC 15476-4:2005 Part 4: Data models
ISO/IEC 15476-6:2006 Part 6: State/event models
ISO 15480:2019 Fasteners β Hexagon washer head drilling screws with tapping screw thread
ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
ISO/IEC 15485:1997 Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 MB per cartridge
ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2.6 GB per cartridge
ISO 15489 Information and documentation β Records management
ISO 15489-1:2016 Part 1: Concepts and principles
ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 MB per cartridge
ISO/IEC 15504 Information technology β Process assessment
ISO/IEC 15505:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Message Waiting Indication supplementary service
ISO/IEC 15506:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Message Waiting Indication supplementary service
ISO/IEC 15507:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β PINX clock synchronization
ISO 15519 Specification for diagrams for process industry
ISO 15519-1:2010 Part 1: General rules
ISO 15519-2:2015 Part 2: Measurement and control
ISO/IEC 15521:1998 Information technology β 3.81 mm wide magnetic tape cartridge for information interchange β Helical scan recording β DDS-3 format using 125 m length tapes
ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 15530 Geometrical product specifications (GPS) β Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
ISO 15583:2005 Ships and marine technology - Maritime standards list
ISO/TR 15599:2002 Digital codification of dental laboratory procedures
ISO 15614 Specification and qualification of welding procedures for metallic materials β Welding procedure test
ISO 15622:2010 Intelligent transport systems β Adaptive Cruise Control systems β Performance requirements and test procedures
ISO 15623:2013 Intelligent transport systems β Forward vehicle collision warning systems β Performance requirements and test procedures
ISO/TS 15624:2001 Transport information and control systems β Traffic Impediment Warning Systems (TIWS) β System requirements
ISO 15628:2013 Intelligent transport systems β Dedicated short range communication (DSRC) β DSRC application layer
ISO 15638 Intelligent transport systems β Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 4]
ISO 15638-1:2012 Part 1: Framework and architecture
ISO 15638-2:2013 Part 2: Common platform parameters using CALM
ISO 15638-3:2013 Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services
ISO 15638-5:2013 Part 5: Generic vehicle information
ISO 15638-6:2014 Part 6: Regulated applications
ISO 15638-7:2013 Part 7: Other applications
ISO 15638-8:2014 Part 8: Vehicle access management
ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
ISO 15638-11:2014 Part 11: Driver work records
ISO 15638-12:2014 Part 12: Vehicle mass monitoring
ISO/TS 15638-13:2015 Part 13: "Mass" information for jurisdictional control and enforcement
ISO 15638-14:2014 Part 14: Vehicle access control
ISO 15638-15:2014 Part 15: Vehicle location monitoring
ISO 15638-16:2014 Part 16: Vehicle speed monitoring
ISO 15638-17:2014 Part 17: Consignment and location monitoring
ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
ISO 15642:2003 Road construction and maintenance equipment β Asphalt mixing plants β Terminology and commercial specifications
ISO 15662:2006 Intelligent transport systems β Wide area communication β Protocol management information
ISO 15664:2001 Acoustics β Noise control design procedures for open plant
ISO 15665:2003 Acoustics β Acoustic insulation for pipes, valves and flanges
ISO 15667:2000 Acoustics β Guidelines for noise control by enclosures and cabins
ISO 15674:2016 Cardiovascular implants and artificial organs β Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
ISO 15675:2016 Cardiovascular implants and artificial organs β Cardiopulmonary bypass systems β Arterial blood line filters
ISO 15676:2016 Cardiovascular implants and artificial organs β Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ISO 15686 Buildings and constructed assets β Service life planning
ISO 15688:2012 Road construction and maintenance equipment β Soil stabilizers β Terminology and commercial specifications
ISO 15689:2003 Road construction and maintenance equipment β Powder binder spreaders β Terminology and commercial specifications
ISO/IEC 15718:1998 Information technology β Data interchange on 8 mm wide magnetic tape cartridge β Helical scan recording β HH-1 format
ISO/IEC 15731:1998 Information technology β 12.65 mm wide magnetic tape cassette for information interchange β Helical scan recording β DTF-1 format
ISO 15744:2002 Hand-held non-electric power tools β Noise measurement code β Engineering method (grade 2)
ISO 15747:2010 Plastic containers for intravenous injections
ISO 15752:2010 Ophthalmic instruments β Endoilluminators β Fundamental requirements and test methods for optical radiation safety
ISO/IEC 15757:1998 Information technology β Data interchange on 8 mm wide magnetic tape cartridge β Helical scan recording β DA-2 format
ISO 15759:2005 Medical infusion equipment β Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
ISO/TS 15768:2000 Measurement of liquid velocity in open channels β Design, selection and use of electromagnetic current meters
ISO 15769:2010 Hydrometry β Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO/IEC 15771:1998 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Common information additional network feature
ISO/IEC 15772:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Common Information additional network feature
ISO/IEC 15773:1998 Information technology β Telecommunications and information exchange between systems β Broadband Private Integrated Services Network β Inter-exchange signalling protocol β Transit counter additional network feature
ISO/IEC 15776:2001 VME64bus - Specification
ISO/IEC 15780:1998 Information technology β 8 mm wide magnetic tape cartridge β Helical scan recording β AIT-1 format
ISO 15782 Certificate management for financial services[Note 4]
ISO 15782-1:2009 Part 1: Public key certificates
ISO 15782-2:2001 Part 2: Certificate extensions
ISO 15783:2002 Seal-less rotodynamic pumps β Class II β Specification
ISO 15784 Intelligent transport systems (ITS) β Data exchange involving roadside modules communication
ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
ISO 15785:2002 Technical drawings β Symbolic presentation and indication of adhesive, fold and pressed joints
ISO 15786:2008 Technical drawings β Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation β Heat-treated ferrous parts β Presentation and indications
ISO 15798:2013 Ophthalmic implants β Ophthalmic viscosurgical devices
ISO/IEC 15802 Information technology β Telecommunications and information exchange between systems β Local and metropolitan area networks β Common specifications
ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
ISO/IEC 15816:2002 Information technology - Security techniques - Security information objects for access control
ISO 15836:2009 Information and documentation β The
Dublin Core metadata element set
ISO 15836-1:2017 Part 1: Core elements
ISO/TR 15847:2008 Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
ISO 15849:2001 Ships and marine technology β Guidelines for implementation of a fleet management system network
ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods β Terminology
ISO 15870:2000 Powered industrial trucks - Safety signs and hazard pictorials - General principles
ISO 15878:2008 Road construction and maintenance equipment β Asphalt pavers β Terminology and commercial specifications
ISO/IEC 15895:1999 Information technology β Data interchange on 12.7 mm 128-track magnetic tape cartridges β DLT 3-XT format
ISO/IEC 15896:1999 Information technology β Data interchange on 12.7 mm 208-track magnetic tape cartridges β DLT 5 format
ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice.
ISO/IEC 15898:1998 Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14.8 GB and 25 GB per cartridge
ISO/IEC 15899:1998 Information technology β Telecommunications and information exchange between systems β Broadband Private Integrated Services Network β Service description β Broadband connection oriented bearer services
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption β Part 2: Analysis of nanopores by gas adsorption
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO/IEC 15909 Systems and software engineering - High-level Petri nets
ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
ISO/IEC 15953:1999 Information technology β Open Systems Interconnection β Service definition for the Application Service Object Association Control Service Element
ISO/IEC 15954:1999 Information technology β Open Systems Interconnection β Connection-mode protocol for the Application Service Object Association Control Service Element
ISO/IEC 15955:1999 Information technology β Open Systems Interconnection β Connectionless protocol for the Application Service Object Association Control Service Element
ISO/IEC 15961 Information technology - Radio frequency identification (RFID) for item management: Data protocol
ISO/IEC 15961-1:2013 Part 1: Application interface
ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
ISO/IEC 15962:2013 Information technology - Radio frequency identification (RFID) for item management - Data protocol: data encoding rules and logical memory functions
ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
ISO 15970 Natural gas β Measurement of properties β Volumetric properties: density, pressure, temperature and compression factor
ISO 15985:2004 Plastics β Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions β Method by analysis of released
biogas
ISO/IEC 15991:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC 15992:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Priority Interruption and Call Priority Interruption Protection supplementary services
The standards are protected by
copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and
IEC's Joint Technical Committee 1 (
JTC 1) have been made freely and publicly available.[2]
ISO 14000 β ISO 14999
ISO 14000 Environmental management systems (This is a set of standards, rather than a single standard)
ISO 14001:2015 Environmental management systems β Requirements with guidance for use
ISO 14004:2016 Environmental management systems β General guidelines on implementation
ISO 14005:2010 Environmental management systems β Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
ISO 14006:2011 Environmental management systems β Guidelines for incorporating ecodesign
ISO 14015:2022 Environmental management β Guidelines for environmental due diligence assessment
ISO 14020:2000 Environmental labels and declarations β General principles
ISO 14031 Environmental management - Environmental performance evaluation β Guidelines
ISO 14045:2012 describes the principles, requirements and guidelines for
eco-efficiency assessment for product systems [3]
ISO 14046:2014 - Environmental management β
Water footprint β Principles, requirements and guidelines
ISO 14117:2012 Active implantable medical devices β Electromagnetic compatibility β EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
ISO 14132 Optics and photonics - Vocabulary for telescopic systems
ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
ISO 14132-3:2014 Part 3: Terms for telescopic sights
ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
ISO 14132-5:2008 Part 5: Terms for night vision devices
ISO/IEC 14136:1995 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Identification supplementary services
ISO 14139:2000 Hydrometric determinations β Flow measurements in open channels using structures β Compound gauging structures
ISO 14242 Implants for surgery β Wear of total hip-joint prostheses
ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2:2016 Part 2: Methods of measurement
ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
ISO 14243 Implants for surgery β Wear of total knee-joint prostheses
ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2016 Part 2: Methods of measurement
ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO/IEC 14251:1995 Information technology β Data interchange on 12.7 mm 36-track magnetic tape cartridges
ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO/TS 14265:2011 Health Informatics β Classification of purposes for processing personal health information
ISO/TR 14283:2004 Implants for surgery β Fundamental principles
ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
ISO/TR 14292:2012 Health informatics β Personal health records β Definition, scope and context
ISO 14296:2016 Intelligent transport systems β Extension of map database specifications for applications of cooperative ITS
ISO 14302:2002 Space systems β Electromagnetic compatibility requirements
ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO/IEC TR 14369:2018 Information technology β Programming languages, their environments and system software interfaces β Guidelines for the preparation of language-independent service specifications (LISS)
ISO 14405 Geometrical product specifications (GPS) β Dimensional tolerancing
ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
ISO 14405-3:2016 Part 3: Angular sizes
ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
ISO 14408:2016 Tracheal tubes designed for laser surgery β Requirements for marking and accompanying information
ISO 14416:2003 Information and documentation β Requirements for binding of books, periodicals, serials and other paper documents for archive and library use β Methods and materials
ISO/IEC 14417:1999 Information technology β Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
ISO/TS 14441:2013 Health informatics β Security and privacy requirements of EHR systems for use in conformity assessment
ISO 14451 Pyrotechnic articles β Pyrotechnic articles for vehicles
ISO 14451-1:2013 Part 1: Terminology
ISO 14452:2012 Network services billing β Requirements
ISO 14461 Milk and milk products β Quality control in microbiological laboratories
ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
ISO/IEC 14462:2010 Information technology - Open-edi reference model
ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
ISO/IEC 14474:1998 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Functional requirements for static circuit-mode inter-PINX connections
ISO/IEC TR 14475:2001 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Architecture and scenarios for Private Integrated Services Networking
ISO/IEC 14476 Information technology β Enhanced communications transport protocol
ISO/IEC 14476-1:2002 Specification of simplex multicast transport
ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
ISO/IEC 14476-3:2008 Specification of duplex multicast transport
ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects (PREMO)
ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
ISO/IEC 14478-2:1998 Part 2: Foundation Component
ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
ISO/IEC 14495-1:1999 Baseline
ISO/IEC 14495-2:2003 Extensions
ISO/IEC 14496 Information technology β Coding of audio-visual objects
ISO 14500:2003 Textile machinery and accessories β Harnesses for Jacquard weaving machines β Vocabulary
ISO 14509 Small craft β Airborne sound emitted by powered recreational craft
ISO 14509-1:2008 Part 1: Pass-by measurement procedures
ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
ISO 14511:2001 Measurement of fluid flow in closed conduits β Thermal mass flowmeters
ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX) - Test methods for measuring conformance to POSIX
ISO/IEC 14515-1:2000 Part 1: System interfaces
ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2.6 GB per cartridge
ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
ISO 14532:2014 Natural gas β Vocabulary
ISO 14533 Processes, data elements and documents in commerce, industry and administration β Long term signature profiles
ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (
CAdES)
ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (
XAdES)
ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (
PAdES)
ISO 14534:2011 Ophthalmic optics β Contact lenses and contact lens care products β Fundamental requirements
ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
ISO/IEC 14543 Information technology β Home Electronic System (HES) architecture
ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers β Application layer for network based control of HES Class 1
ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers β Transport, network and general parts of data link layer for network based control of HES Class 1
ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
ISO/IEC 14543-3-4:2007 Part 3-4: System management β Management procedures for network based control of HES Class 1
ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers β Power line for network based control of HES Class 1
ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers β Network based on HES Class 1, twisted pair
ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers β Radio frequency for network based control of HES Class 1
ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting β Architecture and lower layer protocols
ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting β Architecture and lower layer protocols
ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers β Application layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers β Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 β Core protocol
ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Basic application
ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Device validation
ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Device type
ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Service type
ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing β Remote access system architecture
ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Remote access core protocol
ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 β Remote access service platform
ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Application profile β AV profile
ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 β Application profile β File profile
ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus (STbus) - Logical Layer
ISO 14580:2011 Hexalobular socket cheese head screws
ISO 14588:2000 Blind rivets - Terminology and definitions
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO/IEC 14651:2020 Information technology β International string ordering and comparison β Method for comparing character strings and description of the common template tailorable ordering
ISO/IEC 14662:2010 Information technology β Open-edi reference model
ISO/TR 14685:2001 Hydrometric determinations β Geophysical logging of boreholes for hydrogeological purposes β Considerations and guidelines for making measurements
ISO 14686:2003 Hydrometric determinations β Pumping tests for water wells β Considerations and guidelines for design, performance and use
ISO 14695:2003 Industrial fans β Method of measurement of fan vibration
ISO 14698 Cleanrooms and associated controlled environments β Biocontamination control
ISO 14698-1:2003 General principles and methods
ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
ISO/IEC 14699:1997 Information technology β Open Systems Interconnection β Transport Fast Byte Protocol
ISO/IEC 14700:1997 Information technology β Open Systems Interconnection β Network Fast Byte Protocol
ISO 14708 Implants for surgery β Active implantable medical devices
ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
ISO 14708-2:2012 Part 2: Cardiac pacemakers
ISO 14708-3:2017 Part 3: Implantable neurostimulators
ISO 14708-4:2008 Part 4: Implantable infusion pumps
ISO 14708-5:2010 Part 5: Circulatory support devices
ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling (CPC) for applications
ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
ISO 14722:1998 Moped and moped-rider kinematics β Vocabulary
ISO 14726:2008 Ships and marine technology β Identification colours for the content of piping systems
ISO 14729:2001 Ophthalmic optics β Contact lens care products β Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 14730:2014 Ophthalmic optics β Contact lens care products β Antimicrobial preservative efficacy testing and guidance on determining discard date
ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
ISO 14739-1:2014 Part 1: PRC 10001
ISO/TR 14742:2010 Financial services β Recommendations on cryptographic algorithms and their use
ISO/IEC 14750:1999 Information technology β Open Distributed Processing β Interface Definition Language
ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
ISO/IEC 14754:1999 Information technology β Pen-Based Interfaces β Common gestures for Text Editing with Pen-Based Systems
ISO/IEC 14755:1997 Information technology β Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1.3 GB per cartridge
ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
ISO/IEC 14763-1:1999 Part 1: Administration
ISO/IEC 14763-2:2012 Part 2: Planning and installation
ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol (TCP)
ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
ISO 14837 Mechanical vibration β Ground-borne noise and vibration arising from rail systems
ISO 14837-1:2005 Part 1: General guidance
ISO/TS 14837-31:2017 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
ISO 14839-1:2002 Part 1: Vocabulary
ISO 14839-2:2004 Part 2: Evaluation of vibration
ISO 14839-3:2006 Part 3: Evaluation of stability margin
ISO 14839-4:2012 Part 4: Technical guidelines
ISO/IEC 14840:1996 Information technology β 12.65 mm wide magnetic tape cartridge for information interchange β Helical scan recording β Data-D3-1 format
ISO/IEC 14841:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call offer supplementary service
ISO/IEC 14842:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Do not disturb and do not disturb override supplementary services
ISO/IEC 14843:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Offer supplementary service
ISO/IEC 14844:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Do Not Disturb and Do Not Disturb Override supplementary services
ISO/IEC 14845:1996 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call intrusion supplementary service
ISO/IEC 14846:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Intrusion supplementary service
ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions β Method by analysis of evolved carbon dioxide
ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
ISO 15001:2010 Anaesthetic and respiratory equipment β Compatibility with oxygen
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ISO 15004 Ophthalmic instruments β Fundamental requirements and test methods
ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
ISO 15004-2:2007 Part 2: Light hazard protection
ISO 15006:2011 Road vehicles β Ergonomic aspects of transport information and control systems β Specifications for in-vehicle auditory presentation
ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles β Requirements and test methods
ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
ISO/IEC 15018:2004 Information technology - Generic cabling for homes
ISO 15022 Securities β Scheme for messages (Data Field Dictionary)
ISO/IEC 15026 Systems and software engineeringβSystems and software assurance
ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
ISO/IEC 15026-2:2011 Part 2: Assurance case
ISO/IEC 15026-3:2015 Part 3: System integrity levels
ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
ISO 15031 Road vehicles β Communication between vehicle and external equipment for emissions-related diagnostics
ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
ISO 15032:2000 Prostheses β Structural testing of hip units
ISO/IEC 15041:1997 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 MB per cartridge
ISO/IEC TR 15044:2000 Information technology - Terminology for the Home Electronic System (HES)
ISO/IEC 15045 Information technology - Home Electronic System (HES) gateway
ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
ISO/IEC 15049:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Advice of charge supplementary services
ISO/IEC 15050:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Advice Of Charge supplementary services
ISO/IEC 15051:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Recall supplementary service
ISO/IEC 15052:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Recall supplementary service
ISO/IEC 15053:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call Interception additional network feature
ISO/IEC 15054:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Interception additional network feature
ISO/IEC 15055:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Transit counter additional network feature
ISO/IEC 15056:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Transit counter additional network feature
ISO/IEC 15067 Information technology - Home Electronic System (HES) application model[Note 4]
ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
ISO 15075:2003 Transport information and control systems β In-vehicle navigation systems β Communications message set requirements
ISO 15081:2011 Agricultural equipment - Graphical symbols for pressurized irrigation systems
ISO 15118 Road vehicles - Vehicle to grid communication interface
ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials β Requirements and test methods
ISO 15142 Implants for surgery β Metal intramedullary nailing systems
ISO 15142-1:2003 Part 1: Intramedullary nails
ISO 15142-2:2003 Part 2: Locking components
ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
ISO 15143 Earth-moving machinery and mobile road construction machinery β Worksite data exchange
ISO 15143-1:2010 Part 1: System architecture
ISO 15143-2:2010 Part 2: Data dictionary
ISO/TS 15143-3:2016 Part 3: Telematics data
ISO/IEC 15145:1997 Information technology - Programming languages -
FORTH
ISO/IEC 15149:2011 Information technology β Telecommunications and information exchange between systems β Magnetic field area network (MFAN)
ISO/IEC 15149-1:2014 Part 1: Air interface
ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
ISO 15174:2012 Milk and milk products β Microbial coagulants β Determination of total milk-clotting activity
ISO 15188:2001 Project management guidelines for terminology standardization
ISO 15189:2012 Medical laboratories β Particular requirements for quality and competence
ISO/IEC 15200:1996 Information technology - Adaptive Lossless Data Compression algorithm (ALDC)
ISO/IEC 15205:2000 SBus - Chip and module interconnect bus
ISO 15212 Oscillation-type density meters
ISO 15212-1:1998 Part 1: Laboratory instruments
ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
ISO 15213:2003 Microbiology of food and animal feeding stuffs β Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
ISO 15214:1998 Microbiology of food and animal feeding stuffs β Horizontal method for the enumeration of mesophilic lactic acid bacteria β Colony-count technique at 30 degrees C
ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 4]
ISO 15216-1:2017 Part 1: Method for quantification
ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
ISO 15223 Medical devices β Symbols to be used with medical device labels, labelling, and information to be supplied
ISO 15223-1:2016 Part 1: General requirements
ISO 15223-2:2010 Part 2: Symbol development, selection and validation
ISO 15225:2016 Medical devices β Quality management β Medical device nomenclature data structure
ISO 15226:1999 Technical product documentation β Life cycle model and allocation of documents
ISO 15230:2007 Mechanical vibration and shock β Coupling forces at the manβmachine interface for hand-transmitted vibration
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO 15241:2012 Rolling bearings - Symbols for physical quantities
ISO 15253:2000 Ophthalmic optics and instruments β Optical devices for enhancing low vision
ISO 15254:2009 Ophthalmic optics and instruments β Electro-optical devices for enhancing low vision
ISO 15261:2004 Vibration and shock generating systems - Vocabulary
ISO/IEC TR 15285:1998 Information technology - An operational model for characters and glyphs
ISO/IEC 15286:1999 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 5.2 GB per cartridge
ISO/IEC/IEEE 15288:2015 Systems and software engineering β System life cycle processes
ISO/IEC/IEEE 15289:2017 Systems and software engineering β Content of life-cycle information items (documentation)
ISO/IEC TR 15294:2000 Information technology β Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
ISO 15296:2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment
ISO/TR 15300:2001 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
ISO/IEC 15307:1997 Information technology β Data interchange on 12.7 mm 128-track magnetic tape cartridges β DLT 4 format
ISO 15309:2013 Implants for surgery β Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
ISO/PAS 15339 Graphic technology - Printing from digital data across multiple technologies
ISO/PAS 15339-1:2015 Part 1: Principles
ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
ISO 15367 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront
ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 15374:1998 Implants for surgery β Requirements for production of forgings
ISO 15375:2010 Medical infusion bottles β Suspension devices for multiple use β Requirements and test methods
ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices β Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
ISO 15378:2017 Primary packaging materials for medicinal products β Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
ISO 15394:2009 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
ISO 15403 Natural gas β Natural gas for use as a compressed fuel for vehicles
ISO 15403-1:2006 Part 1: Designation of the quality
ISO/TR 15403-2:2006 Part 2: Specification of the quality
ISO/IEC 15404:2000 Information technology β Office machines β Minimum information to be included in specification sheets β Facsimile equipment
ISO/IEC 15408 Information technology β Security techniques β Evaluation criteria for IT security
ISO/IEC 15408-1:2009 Part 1: Introduction and general model
ISO/IEC 15408-2:2008 Part 2: Security functional components
ISO/IEC 15408-3:2008 Part 3: Security assurance components
ISO/IEC TR 15410:1998 Information technology β Telecommunications and information exchange between systems β PISN mobility-general principles and services aspects
ISO/IEC 15411:1999 Information technology - Segmented keyboard layouts
ISO/IEC 15412:1999 Information technology - Portable computer keyboard layouts
ISO/IEC TR 15413:2001 Information technology - Font services - Abstract service definition
ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15415:2011 Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols
ISO/IEC 15416:2016 Automatic identification and data capture techniques -
Bar code print quality test specification - Linear symbols
ISO/IEC 15417:2007 Information technology - Automatic identification and data capture techniques -
Code 128 bar code symbology specification
ISO/IEC 15418:2016 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
ISO/IEC 15419:2009 Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing
ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
ISO/IEC 15426 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification
ISO/IEC 15426-1:2006 Part 1: Linear symbols
ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
ISO/IEC 15428:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
ISO/IEC 15429:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
ISO/IEC 15430:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless terminal call handling additional network features
ISO/IEC 15431:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless terminal call handling additional network features
ISO/IEC 15432:1999 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Wireless Terminal Authentication supplementary services (WTAT and WTAN)
ISO/IEC 15433:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Wireless Terminal Authentication supplementary services
ISO/IEC 15434:2006 Information technology β Automatic identification and data capture techniques β Syntax for high-capacity ADC media
ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
ISO/IEC 15438:2015 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification
ISO/IEC TR 15440:2016 Information technology - Future keyboards and other input devices and entry methods
ISO/IEC 15457-1:2008 Part 1: Physical characteristics
ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
ISO/IEC 15457-3:2008 Part 3: Test methods
ISO/IEC 15459 Information technology - Automatic identification and data capture techniques - Unique identification
ISO/IEC 15459-1:2014 Part 1: Individual transport units
ISO/IEC 15459-2:2015 Part 2: Registration procedures
ISO/IEC 15459-3:2014 Part 3: Common rules
ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
ISO/IEC 15459-6:2014 Part 6: Groupings
ISO 15469:2004 Spatial distribution of daylight β CIE standard general sky
ISO/IEC 15474 Information technology - CDIF framework
ISO/IEC 15474-1:2002 Part 1: Overview
ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
ISO/IEC 15475 Information technology - CDIF transfer format
ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
ISO/IEC 15476 Information technology - CDIF semantic metamodel
ISO/IEC 15476-1:2002 Part 1: Foundation
ISO/IEC 15476-2:2002 Part 2: Common
ISO/IEC 15476-3:2006 Part 3: Data definitions
ISO/IEC 15476-4:2005 Part 4: Data models
ISO/IEC 15476-6:2006 Part 6: State/event models
ISO 15480:2019 Fasteners β Hexagon washer head drilling screws with tapping screw thread
ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
ISO/IEC 15485:1997 Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 MB per cartridge
ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2.6 GB per cartridge
ISO 15489 Information and documentation β Records management
ISO 15489-1:2016 Part 1: Concepts and principles
ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 MB per cartridge
ISO/IEC 15504 Information technology β Process assessment
ISO/IEC 15505:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Message Waiting Indication supplementary service
ISO/IEC 15506:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Message Waiting Indication supplementary service
ISO/IEC 15507:1997 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β PINX clock synchronization
ISO 15519 Specification for diagrams for process industry
ISO 15519-1:2010 Part 1: General rules
ISO 15519-2:2015 Part 2: Measurement and control
ISO/IEC 15521:1998 Information technology β 3.81 mm wide magnetic tape cartridge for information interchange β Helical scan recording β DDS-3 format using 125 m length tapes
ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 15530 Geometrical product specifications (GPS) β Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
ISO 15583:2005 Ships and marine technology - Maritime standards list
ISO/TR 15599:2002 Digital codification of dental laboratory procedures
ISO 15614 Specification and qualification of welding procedures for metallic materials β Welding procedure test
ISO 15622:2010 Intelligent transport systems β Adaptive Cruise Control systems β Performance requirements and test procedures
ISO 15623:2013 Intelligent transport systems β Forward vehicle collision warning systems β Performance requirements and test procedures
ISO/TS 15624:2001 Transport information and control systems β Traffic Impediment Warning Systems (TIWS) β System requirements
ISO 15628:2013 Intelligent transport systems β Dedicated short range communication (DSRC) β DSRC application layer
ISO 15638 Intelligent transport systems β Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 4]
ISO 15638-1:2012 Part 1: Framework and architecture
ISO 15638-2:2013 Part 2: Common platform parameters using CALM
ISO 15638-3:2013 Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services
ISO 15638-5:2013 Part 5: Generic vehicle information
ISO 15638-6:2014 Part 6: Regulated applications
ISO 15638-7:2013 Part 7: Other applications
ISO 15638-8:2014 Part 8: Vehicle access management
ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
ISO 15638-11:2014 Part 11: Driver work records
ISO 15638-12:2014 Part 12: Vehicle mass monitoring
ISO/TS 15638-13:2015 Part 13: "Mass" information for jurisdictional control and enforcement
ISO 15638-14:2014 Part 14: Vehicle access control
ISO 15638-15:2014 Part 15: Vehicle location monitoring
ISO 15638-16:2014 Part 16: Vehicle speed monitoring
ISO 15638-17:2014 Part 17: Consignment and location monitoring
ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
ISO 15642:2003 Road construction and maintenance equipment β Asphalt mixing plants β Terminology and commercial specifications
ISO 15662:2006 Intelligent transport systems β Wide area communication β Protocol management information
ISO 15664:2001 Acoustics β Noise control design procedures for open plant
ISO 15665:2003 Acoustics β Acoustic insulation for pipes, valves and flanges
ISO 15667:2000 Acoustics β Guidelines for noise control by enclosures and cabins
ISO 15674:2016 Cardiovascular implants and artificial organs β Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
ISO 15675:2016 Cardiovascular implants and artificial organs β Cardiopulmonary bypass systems β Arterial blood line filters
ISO 15676:2016 Cardiovascular implants and artificial organs β Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ISO 15686 Buildings and constructed assets β Service life planning
ISO 15688:2012 Road construction and maintenance equipment β Soil stabilizers β Terminology and commercial specifications
ISO 15689:2003 Road construction and maintenance equipment β Powder binder spreaders β Terminology and commercial specifications
ISO/IEC 15718:1998 Information technology β Data interchange on 8 mm wide magnetic tape cartridge β Helical scan recording β HH-1 format
ISO/IEC 15731:1998 Information technology β 12.65 mm wide magnetic tape cassette for information interchange β Helical scan recording β DTF-1 format
ISO 15744:2002 Hand-held non-electric power tools β Noise measurement code β Engineering method (grade 2)
ISO 15747:2010 Plastic containers for intravenous injections
ISO 15752:2010 Ophthalmic instruments β Endoilluminators β Fundamental requirements and test methods for optical radiation safety
ISO/IEC 15757:1998 Information technology β Data interchange on 8 mm wide magnetic tape cartridge β Helical scan recording β DA-2 format
ISO 15759:2005 Medical infusion equipment β Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
ISO/TS 15768:2000 Measurement of liquid velocity in open channels β Design, selection and use of electromagnetic current meters
ISO 15769:2010 Hydrometry β Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO/IEC 15771:1998 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Common information additional network feature
ISO/IEC 15772:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Common Information additional network feature
ISO/IEC 15773:1998 Information technology β Telecommunications and information exchange between systems β Broadband Private Integrated Services Network β Inter-exchange signalling protocol β Transit counter additional network feature
ISO/IEC 15776:2001 VME64bus - Specification
ISO/IEC 15780:1998 Information technology β 8 mm wide magnetic tape cartridge β Helical scan recording β AIT-1 format
ISO 15782 Certificate management for financial services[Note 4]
ISO 15782-1:2009 Part 1: Public key certificates
ISO 15782-2:2001 Part 2: Certificate extensions
ISO 15783:2002 Seal-less rotodynamic pumps β Class II β Specification
ISO 15784 Intelligent transport systems (ITS) β Data exchange involving roadside modules communication
ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
ISO 15785:2002 Technical drawings β Symbolic presentation and indication of adhesive, fold and pressed joints
ISO 15786:2008 Technical drawings β Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation β Heat-treated ferrous parts β Presentation and indications
ISO 15798:2013 Ophthalmic implants β Ophthalmic viscosurgical devices
ISO/IEC 15802 Information technology β Telecommunications and information exchange between systems β Local and metropolitan area networks β Common specifications
ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
ISO/IEC 15816:2002 Information technology - Security techniques - Security information objects for access control
ISO 15836:2009 Information and documentation β The
Dublin Core metadata element set
ISO 15836-1:2017 Part 1: Core elements
ISO/TR 15847:2008 Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
ISO 15849:2001 Ships and marine technology β Guidelines for implementation of a fleet management system network
ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods β Terminology
ISO 15870:2000 Powered industrial trucks - Safety signs and hazard pictorials - General principles
ISO 15878:2008 Road construction and maintenance equipment β Asphalt pavers β Terminology and commercial specifications
ISO/IEC 15895:1999 Information technology β Data interchange on 12.7 mm 128-track magnetic tape cartridges β DLT 3-XT format
ISO/IEC 15896:1999 Information technology β Data interchange on 12.7 mm 208-track magnetic tape cartridges β DLT 5 format
ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice.
ISO/IEC 15898:1998 Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14.8 GB and 25 GB per cartridge
ISO/IEC 15899:1998 Information technology β Telecommunications and information exchange between systems β Broadband Private Integrated Services Network β Service description β Broadband connection oriented bearer services
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption β Part 2: Analysis of nanopores by gas adsorption
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO/IEC 15909 Systems and software engineering - High-level Petri nets
ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
ISO/IEC 15953:1999 Information technology β Open Systems Interconnection β Service definition for the Application Service Object Association Control Service Element
ISO/IEC 15954:1999 Information technology β Open Systems Interconnection β Connection-mode protocol for the Application Service Object Association Control Service Element
ISO/IEC 15955:1999 Information technology β Open Systems Interconnection β Connectionless protocol for the Application Service Object Association Control Service Element
ISO/IEC 15961 Information technology - Radio frequency identification (RFID) for item management: Data protocol
ISO/IEC 15961-1:2013 Part 1: Application interface
ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
ISO/IEC 15962:2013 Information technology - Radio frequency identification (RFID) for item management - Data protocol: data encoding rules and logical memory functions
ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
ISO 15970 Natural gas β Measurement of properties β Volumetric properties: density, pressure, temperature and compression factor
ISO 15985:2004 Plastics β Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions β Method by analysis of released
biogas
ISO/IEC 15991:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Specification, functional model and information flows β Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC 15992:2003 Information technology β Telecommunications and information exchange between systems β Private Integrated Services Network β Inter-exchange signalling protocol β Call Priority Interruption and Call Priority Interruption Protection supplementary services