An iron roughneck is a piece of hydraulic machinery used to "handle" (connect and disconnect) segments of pipe in a modern drilling rig. [1] The segments can be manipulated as they are hoisted into and out of a borehole. This type of work was previously performed manually by workers using tongs, [1] and was one of the most dangerous jobs in a drilling operation. However, with iron roughnecks and modern technology, much of this can be done remotely with minimal manual handling. [2]
Automated roughnecks became common in deep-water drilling and were later adopted by onshore rigs. [1]
References
- ^ a b c Dlouhy, Jennifer A. (16 May 2014). "Century-old water driller's new rigs walk into oil field service". Houston Chronicle. Retrieved 15 January 2015.
- ^ "How do Iron Roughnecks Work". www.rigzone.com. Rig Zone. Retrieved 15 January 2015.
 | This technology-related article is a stub. You can help Wikipedia by expanding it. |
An iron roughneck is a piece of hydraulic machinery used to "handle" (connect and disconnect) segments of pipe in a modern drilling rig. [1] The segments can be manipulated as they are hoisted into and out of a borehole. This type of work was previously performed manually by workers using tongs, [1] and was one of the most dangerous jobs in a drilling operation. However, with iron roughnecks and modern technology, much of this can be done remotely with minimal manual handling. [2]
Automated roughnecks became common in deep-water drilling and were later adopted by onshore rigs. [1]
References
- ^ a b c Dlouhy, Jennifer A. (16 May 2014). "Century-old water driller's new rigs walk into oil field service". Houston Chronicle. Retrieved 15 January 2015.
- ^ "How do Iron Roughnecks Work". www.rigzone.com. Rig Zone. Retrieved 15 January 2015.
|
| This technology-related article is a stub. You can help Wikipedia by expanding it. |