FGC-9 | |
---|---|
![]() | |
Type | Semiautomatic carbine |
Place of origin | Germany |
Service history | |
Wars | Myanmar civil war (2021–present) |
Production history | |
Designer | Jacob Duygu (JStark1809) of Deterrence Dispensed [1] |
Designed | 2018–2020 |
Produced | 2019–present |
Variants | see variants |
Specifications | |
Mass | 2.1 kg (4 lb 10.1 oz) without magazine |
Length | 520 mm (20.5 in) |
Barrel length | 114 mm (4.5 in) |
Cartridge | 9×19mm |
Action | Closed bolt blowback action |
Feed system | Glock magazine, including custom extended variants |
Sights | Picatinny rail |
The FGC-9 is a physible, 3D-printable, semi-automatic, pistol-caliber carbine. The firearm was first designed and manufactured between 2018 and 2020 by Jacob Duygu, a Kurdish German [1] [2] gun designer known by the pseudonym "JStark1809". [3] [4]
Released with accompanying documentation to aid construction, assembly, and the home manufacture of suitable ammunition, the FGC-9's design generally circumvents the global regulation of firearm parts by avoiding regulated parts in favor of off-the-shelf materials. Though the majority of the firearm is 3D-printable, its pressure-bearing components are metal parts that may be purchased or homemade. The total cost of production, assuming the builder owns a 3D printer, is less than US$500. [5] [6]
In April 2021, a "MkII" revision was released.
The gun's name is an acronym for "Fuck Gun Control", with the "9" referencing its 9mm cartridge. [7]
The FGC-9 was originally designed and manufactured between 2018 and 2020 by JStark1809, a pseudonymous German- Kurdish [2] [8] gun designer, with contributions from the "guerrilla 3D-gun file development group" Deterrence Dispensed, and was released on March 27, 2020. The design is based on an earlier 3D printable firearm, the Shuty AP-9 pistol by Derwood. [9] Where the "Shuty" relied on several factory-made or machined gun parts (like the barrel) in order to be completed, the FGC-9 made ergonomic and mechanical changes to accommodate builders without access to commercial gun parts or machine shops. These changes show the mutual influence of Philip Luty's even earlier SMG designs. [10]
The FGC-9 is designed with Europeans in mind; fasteners and build materials use the metric standard and are available from hardware stores. The magazine can be 3D printed, and the entire design works without needing any regulated, commercial gun parts. The FGC-9's barrel can be completed in several ways, including the easily adopted method of electrochemical machining. [11] [12]
An updated design, the MkII, was first announced on October 23, 2020 by En Bloc Press. [10] It was released on April 16, 2021 on DEFCAD and Odysee by user "The Gatalog". [13] The updated weapon uses a H&K MP5 style charging handle, an improved electro-chemical machining process to make the barrel, and some ergonomic improvements as well. The release was the final package in a string of multiple smaller releases, which included the improved barrel ECMv2.0 process, and the Menendez Mag v2.0, and the Common Sense Fire Control Group AR-15 printable trigger, all created by Ivan The Troll in preparation for the FGC-9 MkII release. [14]
Due to the open-source nature of the FGC-9, there have been many packages released that alter the configuration, caliber, ergonomics, and other legally-restrictive qualities of the base-model firearm. These are all available through a wide variety of channels, all with different levels of testing, and allow the end user to customize their weapon as needed. One very common branch is replacing the buttstock with an ATF-approved pistol brace, in order for U.S. citizens to comply with NFA rifle and pistol requirements. Another common branch is replacing the barrel with a 16-inch (41 cm) barrel in order to comply with U.S. minimum barrel length requirements, in addition to adding an extended handguard to replace the default one. The firearms hobbyist and instructor QueerArmorer created a version of the top rail for use in Myanmar by rebels fighting with limited access to optics in the Myanmar civil war, however its use was limited as another team from Deterrence Dispensed developed printable iron sights that allowed for more flexibility. [15]
Name | Date made public | Designer |
---|---|---|
FGC-9 MkII | April 16, 2021 | JStark1809 (DetDisp) |
| ||
FGC-9 MKII Stingray [16] | June 2022 | hotsauce |
| ||
Partisan-9 [18] [19] | September 2022 | ImmortalRevolt,Deterrents Dispensed / The Gatalog |
FGC-9 MKII Bufferless [20] [21] [22] | Bufferless version with the bolt placed mostly forward similar to Mussys WTF-9 | |
FMGC-01 [23] | Bufferless select fire variant that uses Sten magazines instead of Glocks | |
Nutty-9 [24] | In Beta | TooAceForThisShit, DetDisp, The Gatalog, Black Lotus Coalition |
|
The upper and lower receivers of the FGC-9 are fully 3D-printed, as are its pistol grip and stock. Its magazine, based on the Glock magazine design, may also be printed. For the MkI, an AR-15 or modified airsoft trigger system is needed for the fire control. In the MkII release, the developers released a package to 3D-print the AR-15 trigger. The barrel can be rifled polygonally through electrochemical machining. Some designers have estimated the tooling to complete the FGC-9, including the price of the printer (~$200) and electrochemical machining equipment (~$100), at $500. [25] JStark1809 himself estimated the project to take 1.5 to 2 weeks to build. [26]: 12:34
The gun's 3D-printing files were released under an open-source license on DEFCAD by JStark1809, and then uploaded to various hosting platforms by Deterrence Dispensed such as Odysee, a free-speech blockchain based video, audio and file hosting site using the LBRY protocol.
According to Rajan Basra, a professor at International Centre for the Study of Radicalisation at King's College London, the FGC is particularly popular among far-right groups due to the sharing of its instructions in extremist internet forums. [27]
Jake Hanrahan of Popular Front interviewed JStark1809 about the FGC-9 and 3D printed guns in November 2020. [26] JStark1809 stated that he had no background in engineering, taught himself CAD, and learned what he needed through widely-available resources on the internet. With his rudimentary operation, he showed how to manufacture an FGC-9 in two weeks or less. He shot the gun in a forest and demonstrated its reliability and rapid firing rate. JStark1809 described his absolutist belief in the right to keep and make arms, as well as his desire to make the weapons widely available in order to protect human rights. Hanrahan described him as "one of the most dangerous people" he had ever met and criticized authorities for underestimating the power of 3D-printed guns. [26]
Der Spiegel reported in October 2021 that British financial services had provided clues on the identity of JStark1809 to the Federal Criminal Police Office, and they identified a 28-year-old man in Völklingen who went by "Jacob D." Police had raided his home that June, though they found no weapons and did not take him into custody. Two days after the raid, he was found dead in his car in front of his parents' home in Hannover. Coroners determined the cause of death to be a heart attack and ruled out foul play. [3]
In October 2023, a report published by the International Centre for the Study of Radicalisation and Political Violence named JStark1809 as Jacob Duygu, a German national born to Kurdish parents who arrived as refugees from Southeast Turkey in the 1990s. The report claims he is the author of hundreds of anonymous internet posts, but does so using statistical inference from language patterns rather than direct evidence. In these posts he is said to have posted xenophobic, racist, antisemitic, and misogynistic comments, as well as endorse anti-State violence. The report further claims he described his life as an incel and spoke of his desire to travel to Southeast Asia or commit suicide. [1]
{{
cite book}}
: CS1 maint: numeric names: authors list (
link)
FGC-9 | |
---|---|
![]() | |
Type | Semiautomatic carbine |
Place of origin | Germany |
Service history | |
Wars | Myanmar civil war (2021–present) |
Production history | |
Designer | Jacob Duygu (JStark1809) of Deterrence Dispensed [1] |
Designed | 2018–2020 |
Produced | 2019–present |
Variants | see variants |
Specifications | |
Mass | 2.1 kg (4 lb 10.1 oz) without magazine |
Length | 520 mm (20.5 in) |
Barrel length | 114 mm (4.5 in) |
Cartridge | 9×19mm |
Action | Closed bolt blowback action |
Feed system | Glock magazine, including custom extended variants |
Sights | Picatinny rail |
The FGC-9 is a physible, 3D-printable, semi-automatic, pistol-caliber carbine. The firearm was first designed and manufactured between 2018 and 2020 by Jacob Duygu, a Kurdish German [1] [2] gun designer known by the pseudonym "JStark1809". [3] [4]
Released with accompanying documentation to aid construction, assembly, and the home manufacture of suitable ammunition, the FGC-9's design generally circumvents the global regulation of firearm parts by avoiding regulated parts in favor of off-the-shelf materials. Though the majority of the firearm is 3D-printable, its pressure-bearing components are metal parts that may be purchased or homemade. The total cost of production, assuming the builder owns a 3D printer, is less than US$500. [5] [6]
In April 2021, a "MkII" revision was released.
The gun's name is an acronym for "Fuck Gun Control", with the "9" referencing its 9mm cartridge. [7]
The FGC-9 was originally designed and manufactured between 2018 and 2020 by JStark1809, a pseudonymous German- Kurdish [2] [8] gun designer, with contributions from the "guerrilla 3D-gun file development group" Deterrence Dispensed, and was released on March 27, 2020. The design is based on an earlier 3D printable firearm, the Shuty AP-9 pistol by Derwood. [9] Where the "Shuty" relied on several factory-made or machined gun parts (like the barrel) in order to be completed, the FGC-9 made ergonomic and mechanical changes to accommodate builders without access to commercial gun parts or machine shops. These changes show the mutual influence of Philip Luty's even earlier SMG designs. [10]
The FGC-9 is designed with Europeans in mind; fasteners and build materials use the metric standard and are available from hardware stores. The magazine can be 3D printed, and the entire design works without needing any regulated, commercial gun parts. The FGC-9's barrel can be completed in several ways, including the easily adopted method of electrochemical machining. [11] [12]
An updated design, the MkII, was first announced on October 23, 2020 by En Bloc Press. [10] It was released on April 16, 2021 on DEFCAD and Odysee by user "The Gatalog". [13] The updated weapon uses a H&K MP5 style charging handle, an improved electro-chemical machining process to make the barrel, and some ergonomic improvements as well. The release was the final package in a string of multiple smaller releases, which included the improved barrel ECMv2.0 process, and the Menendez Mag v2.0, and the Common Sense Fire Control Group AR-15 printable trigger, all created by Ivan The Troll in preparation for the FGC-9 MkII release. [14]
Due to the open-source nature of the FGC-9, there have been many packages released that alter the configuration, caliber, ergonomics, and other legally-restrictive qualities of the base-model firearm. These are all available through a wide variety of channels, all with different levels of testing, and allow the end user to customize their weapon as needed. One very common branch is replacing the buttstock with an ATF-approved pistol brace, in order for U.S. citizens to comply with NFA rifle and pistol requirements. Another common branch is replacing the barrel with a 16-inch (41 cm) barrel in order to comply with U.S. minimum barrel length requirements, in addition to adding an extended handguard to replace the default one. The firearms hobbyist and instructor QueerArmorer created a version of the top rail for use in Myanmar by rebels fighting with limited access to optics in the Myanmar civil war, however its use was limited as another team from Deterrence Dispensed developed printable iron sights that allowed for more flexibility. [15]
Name | Date made public | Designer |
---|---|---|
FGC-9 MkII | April 16, 2021 | JStark1809 (DetDisp) |
| ||
FGC-9 MKII Stingray [16] | June 2022 | hotsauce |
| ||
Partisan-9 [18] [19] | September 2022 | ImmortalRevolt,Deterrents Dispensed / The Gatalog |
FGC-9 MKII Bufferless [20] [21] [22] | Bufferless version with the bolt placed mostly forward similar to Mussys WTF-9 | |
FMGC-01 [23] | Bufferless select fire variant that uses Sten magazines instead of Glocks | |
Nutty-9 [24] | In Beta | TooAceForThisShit, DetDisp, The Gatalog, Black Lotus Coalition |
|
The upper and lower receivers of the FGC-9 are fully 3D-printed, as are its pistol grip and stock. Its magazine, based on the Glock magazine design, may also be printed. For the MkI, an AR-15 or modified airsoft trigger system is needed for the fire control. In the MkII release, the developers released a package to 3D-print the AR-15 trigger. The barrel can be rifled polygonally through electrochemical machining. Some designers have estimated the tooling to complete the FGC-9, including the price of the printer (~$200) and electrochemical machining equipment (~$100), at $500. [25] JStark1809 himself estimated the project to take 1.5 to 2 weeks to build. [26]: 12:34
The gun's 3D-printing files were released under an open-source license on DEFCAD by JStark1809, and then uploaded to various hosting platforms by Deterrence Dispensed such as Odysee, a free-speech blockchain based video, audio and file hosting site using the LBRY protocol.
According to Rajan Basra, a professor at International Centre for the Study of Radicalisation at King's College London, the FGC is particularly popular among far-right groups due to the sharing of its instructions in extremist internet forums. [27]
Jake Hanrahan of Popular Front interviewed JStark1809 about the FGC-9 and 3D printed guns in November 2020. [26] JStark1809 stated that he had no background in engineering, taught himself CAD, and learned what he needed through widely-available resources on the internet. With his rudimentary operation, he showed how to manufacture an FGC-9 in two weeks or less. He shot the gun in a forest and demonstrated its reliability and rapid firing rate. JStark1809 described his absolutist belief in the right to keep and make arms, as well as his desire to make the weapons widely available in order to protect human rights. Hanrahan described him as "one of the most dangerous people" he had ever met and criticized authorities for underestimating the power of 3D-printed guns. [26]
Der Spiegel reported in October 2021 that British financial services had provided clues on the identity of JStark1809 to the Federal Criminal Police Office, and they identified a 28-year-old man in Völklingen who went by "Jacob D." Police had raided his home that June, though they found no weapons and did not take him into custody. Two days after the raid, he was found dead in his car in front of his parents' home in Hannover. Coroners determined the cause of death to be a heart attack and ruled out foul play. [3]
In October 2023, a report published by the International Centre for the Study of Radicalisation and Political Violence named JStark1809 as Jacob Duygu, a German national born to Kurdish parents who arrived as refugees from Southeast Turkey in the 1990s. The report claims he is the author of hundreds of anonymous internet posts, but does so using statistical inference from language patterns rather than direct evidence. In these posts he is said to have posted xenophobic, racist, antisemitic, and misogynistic comments, as well as endorse anti-State violence. The report further claims he described his life as an incel and spoke of his desire to travel to Southeast Asia or commit suicide. [1]
{{
cite book}}
: CS1 maint: numeric names: authors list (
link)