![]() | This article has multiple issues. Please help
improve it or discuss these issues on the
talk page. (
Learn how and when to remove these template messages)
|
A diamond turn is a kind of turning manoeuvre used by motor vehicles at four-way intersections.
If a driver approaches a four-way intersection and wishes to make a turn opposite of their side of the road (e.g. a right turn if driving on the left side of the road, as in the UK or Australia), they should turn in a wide arc that passes close to the centre of the intersection. [1]
This is nowadays the standard type of driver's-side turning manoeuvre at a four-way intersection other than a roundabout. In particular, at intersections with traffic lights, it enables a traffic signal phase to allow traffic approaching the intersection from two opposing directions to both turn right simultaneously without colliding.
The diamond turn is distinguished from a historically required manoeuvre wherein drivers simultaneously turning right from opposing directions were required to turn around a silent cop in the centre of the intersection, which resulted in the two vehicles looping past one another with their driver's sides adjacent. [1] This type of turn is still practiced at four-way roundabouts where those making a turn opposite of the side of the road must turn around the central traffic island but was eliminated from all other four-way intersections, as it requires those turning right from one direction to cross right turning traffic from the other direction.[ citation needed]
![]() | This article has multiple issues. Please help
improve it or discuss these issues on the
talk page. (
Learn how and when to remove these template messages)
|
A diamond turn is a kind of turning manoeuvre used by motor vehicles at four-way intersections.
If a driver approaches a four-way intersection and wishes to make a turn opposite of their side of the road (e.g. a right turn if driving on the left side of the road, as in the UK or Australia), they should turn in a wide arc that passes close to the centre of the intersection. [1]
This is nowadays the standard type of driver's-side turning manoeuvre at a four-way intersection other than a roundabout. In particular, at intersections with traffic lights, it enables a traffic signal phase to allow traffic approaching the intersection from two opposing directions to both turn right simultaneously without colliding.
The diamond turn is distinguished from a historically required manoeuvre wherein drivers simultaneously turning right from opposing directions were required to turn around a silent cop in the centre of the intersection, which resulted in the two vehicles looping past one another with their driver's sides adjacent. [1] This type of turn is still practiced at four-way roundabouts where those making a turn opposite of the side of the road must turn around the central traffic island but was eliminated from all other four-way intersections, as it requires those turning right from one direction to cross right turning traffic from the other direction.[ citation needed]