| Development | |
|---|---|
| Designer | Glenn Henderson |
| Location | Canada |
| Year | 1996 |
| No. built | 3 |
| Builder(s) | C&C Yachts |
| Name | SR 25 |
| Boat | |
| Displacement | 1,860 lb (844 kg) |
| Draft | 5.42 ft (1.65 m) with keel down |
| Hull | |
| Type | Monohull |
| Construction | Fibreglass |
| LOA | 25.50 ft (7.77 m) |
| LWL | 21.00 ft (6.40 m) |
| Beam | 8.50 ft (2.59 m) |
| Engine type | Outboard motor |
| Hull appendages | |
| Keel/board type | lifting keel |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 25.55 ft (7.79 m) |
| J foretriangle base | 9.05 ft (2.76 m) |
| P mainsail luff | 27.25 ft (8.31 m) |
| E mainsail foot | 11.66 ft (3.55 m) |
| Sails | |
| Sailplan | Fractional rigged sloop |
| Mainsail area | 158.87 sq ft (14.760 m2) |
| Jib/ genoa area | 115.61 sq ft (10.741 m2) |
| Total sail area | 2,074.48 sq ft (192.725 m2) |
| Racing | |
| PHRF | 120 (average) |
The C&C SR 25 is a Canadian racing sailboat that was designed by Glenn Henderson and first built in 1996. [1] [2] [3]
Production
The design was built by C&C Yachts starting in 1996. It was the last of the SR series of boats and three were completed. [1] [3] [4]
Design
The SR 25 is a racing keelboat, built predominantly of fibreglass. It has a fractional sloop rig, a nearly plumb stem, a reverse transom, an internally-mounted spade-type rudder controlled by a tiller and a lifting fin keel. It displaces 1,860 lb (844 kg). [1] [3]
The boat has a draft of 5.42 ft (1.65 m) with the lifting keel extended and 1.33 ft (0.41 m) with it retracted, allowing ground transportation on a trailer. [1] [3]
The boat may be fitted with a small outboard motor for docking and maneuvering. [1] [3]
The design has a PHRF racing average handicap of 120 with a high of 126 and low of 120. It has a hull speed of 6.14 kn (11.37 km/h). [3] [5]
See also
Related development
Similar sailboats
References
- ^
a
b
c
d
e Browning, Randy (2018).
"SR 25 sailboat specifications and details". sailboatdata.com. Archived from the original on 23 November 2020. Retrieved 2 October 2018.
{{ cite web}}: CS1 maint: bot: original URL status unknown ( link) - ^ McArthur, Bruce (2022). "Glenn Henderson". sailboatdata.com. Archived from the original on 6 March 2022. Retrieved 3 April 2022.
- ^
a
b
c
d
e
f Sea Time Tech, LLC (2022).
"SR 25". sailboat.guide. Archived from the original on 3 April 2022. Retrieved 3 April 2022.
{{ cite web}}: CS1 maint: bot: original URL status unknown ( link) - ^ McArthur, Bruce (2022). "C&C Yachts". sailboatdata.com. Archived from the original on 15 October 2020. Retrieved 3 April 2022.
- ^ InterVisionSoft LLC (2018). "Sailboat Specifications for SR 25". Sailing Joy. Archived from the original on 2 October 2018. Retrieved 26 November 2018.
| C&C ton class series | |
|---|---|
| C&C imperial series | |
| C&C metric series | |
| Landfall series | |
| Redline series | |
| Redwing series | |
| Mega series | |
| SR series | |
| Other boats | |
| People | |
| Development | |
|---|---|
| Designer | Glenn Henderson |
| Location | Canada |
| Year | 1996 |
| No. built | 3 |
| Builder(s) | C&C Yachts |
| Name | SR 25 |
| Boat | |
| Displacement | 1,860 lb (844 kg) |
| Draft | 5.42 ft (1.65 m) with keel down |
| Hull | |
| Type | Monohull |
| Construction | Fibreglass |
| LOA | 25.50 ft (7.77 m) |
| LWL | 21.00 ft (6.40 m) |
| Beam | 8.50 ft (2.59 m) |
| Engine type | Outboard motor |
| Hull appendages | |
| Keel/board type | lifting keel |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 25.55 ft (7.79 m) |
| J foretriangle base | 9.05 ft (2.76 m) |
| P mainsail luff | 27.25 ft (8.31 m) |
| E mainsail foot | 11.66 ft (3.55 m) |
| Sails | |
| Sailplan | Fractional rigged sloop |
| Mainsail area | 158.87 sq ft (14.760 m2) |
| Jib/ genoa area | 115.61 sq ft (10.741 m2) |
| Total sail area | 2,074.48 sq ft (192.725 m2) |
| Racing | |
| PHRF | 120 (average) |
The C&C SR 25 is a Canadian racing sailboat that was designed by Glenn Henderson and first built in 1996. [1] [2] [3]
Production
The design was built by C&C Yachts starting in 1996. It was the last of the SR series of boats and three were completed. [1] [3] [4]
Design
The SR 25 is a racing keelboat, built predominantly of fibreglass. It has a fractional sloop rig, a nearly plumb stem, a reverse transom, an internally-mounted spade-type rudder controlled by a tiller and a lifting fin keel. It displaces 1,860 lb (844 kg). [1] [3]
The boat has a draft of 5.42 ft (1.65 m) with the lifting keel extended and 1.33 ft (0.41 m) with it retracted, allowing ground transportation on a trailer. [1] [3]
The boat may be fitted with a small outboard motor for docking and maneuvering. [1] [3]
The design has a PHRF racing average handicap of 120 with a high of 126 and low of 120. It has a hull speed of 6.14 kn (11.37 km/h). [3] [5]
See also
Related development
Similar sailboats
References
- ^
a
b
c
d
e Browning, Randy (2018).
"SR 25 sailboat specifications and details". sailboatdata.com. Archived from the original on 23 November 2020. Retrieved 2 October 2018.
{{ cite web}}: CS1 maint: bot: original URL status unknown ( link) - ^ McArthur, Bruce (2022). "Glenn Henderson". sailboatdata.com. Archived from the original on 6 March 2022. Retrieved 3 April 2022.
- ^
a
b
c
d
e
f Sea Time Tech, LLC (2022).
"SR 25". sailboat.guide. Archived from the original on 3 April 2022. Retrieved 3 April 2022.
{{ cite web}}: CS1 maint: bot: original URL status unknown ( link) - ^ McArthur, Bruce (2022). "C&C Yachts". sailboatdata.com. Archived from the original on 15 October 2020. Retrieved 3 April 2022.
- ^ InterVisionSoft LLC (2018). "Sailboat Specifications for SR 25". Sailing Joy. Archived from the original on 2 October 2018. Retrieved 26 November 2018.
| C&C ton class series | |
|---|---|
| C&C imperial series | |
| C&C metric series | |
| Landfall series | |
| Redline series | |
| Redwing series | |
| Mega series | |
| SR series | |
| Other boats | |
| People | |