A bubble oxygenator is an early implementation of the oxygenator used for cardiopulmonary bypass. It has since been supplanted by the membrane oxygenator [1] as a result of advances in material science. Some continue to promote it as a low-cost alternative allowing greater self-sufficiency. [2]: p.182
History
Open-heart surgery developed rapidly beginning in the 1950s, and many methods were developed for oxygenating blood outside the body. A bubble oxygenator was introduced in 1950 by Clark, Gollan, and Gupta. [3] The method faced initial skepticism [4]: p.11 but in 1956 the University of Minnesota's De-Wall- Lillehei bubble oxygenator was demonstrated to be relatively simple, inexpensive, and easy to operate. [4]: p.16
The device faced competition from membrane oxygenators, which arrived within the same decade and were found to provide better oxygenation for periods over eight hours, and other advantages beyond six hours. [4]: p.16 However, most open-heart operations were substantially shorter, [4]: p.18 and by 1976 the bubble oxygenator was predominant. [4]: p.16
In the 1980s, microporous membrane oxygenators were developed, and replaced bubble oxygenators in most applications. [2] [4]: p.18
References
- ^ J E Liddicoat; S M Bekassy; A C Beall Jr; D H Glaeser; M E DeBakey (May 1975). "Membrane vs bubble oxygenator: clinical comparison". Ann Surg. 181 (5): 747–753. doi: 10.1097/00000658-197505000-00033. PMC 1345584. PMID 1079448.
- ^ a b Leonard, Ronald J (2003). "The transition from the bubble oxygenator to the microporous membrane oxygenator" (PDF). Perfusion. 18 (3). Stafford, Virginia: 179–183. doi: 10.1191/0267659103pf659oa. PMID 12952125. S2CID 17750817. Retrieved 3 February 2014.
-
^ A.B. Cassie; A.G. Riddell; P.0. Yates (1960).
"Hazard of antifoam emboli from a bubble oxygenator". Thorax. 15 (1): 22–29.
doi:
10.1136/thx.15.1.22.
PMC
1018529.
PMID
13808227.
{{ cite journal}}: CS1 maint: numeric names: authors list ( link) - ^ a b c d e f C. Walton Lillehei (2008). "Historical development of cardiopulmonary bypass in Minnesota". In Glenn P. Gravlee (ed.). Cardiopulmonary Bypass: Principles and Practice (Online). Lippincott Williams & Wilkins. pp. 11–18. ISBN 978-0-7817-6815-3. Retrieved 3 February 2014.
A bubble oxygenator is an early implementation of the oxygenator used for cardiopulmonary bypass. It has since been supplanted by the membrane oxygenator [1] as a result of advances in material science. Some continue to promote it as a low-cost alternative allowing greater self-sufficiency. [2]: p.182
History
Open-heart surgery developed rapidly beginning in the 1950s, and many methods were developed for oxygenating blood outside the body. A bubble oxygenator was introduced in 1950 by Clark, Gollan, and Gupta. [3] The method faced initial skepticism [4]: p.11 but in 1956 the University of Minnesota's De-Wall- Lillehei bubble oxygenator was demonstrated to be relatively simple, inexpensive, and easy to operate. [4]: p.16
The device faced competition from membrane oxygenators, which arrived within the same decade and were found to provide better oxygenation for periods over eight hours, and other advantages beyond six hours. [4]: p.16 However, most open-heart operations were substantially shorter, [4]: p.18 and by 1976 the bubble oxygenator was predominant. [4]: p.16
In the 1980s, microporous membrane oxygenators were developed, and replaced bubble oxygenators in most applications. [2] [4]: p.18
References
- ^ J E Liddicoat; S M Bekassy; A C Beall Jr; D H Glaeser; M E DeBakey (May 1975). "Membrane vs bubble oxygenator: clinical comparison". Ann Surg. 181 (5): 747–753. doi: 10.1097/00000658-197505000-00033. PMC 1345584. PMID 1079448.
- ^ a b Leonard, Ronald J (2003). "The transition from the bubble oxygenator to the microporous membrane oxygenator" (PDF). Perfusion. 18 (3). Stafford, Virginia: 179–183. doi: 10.1191/0267659103pf659oa. PMID 12952125. S2CID 17750817. Retrieved 3 February 2014.
-
^ A.B. Cassie; A.G. Riddell; P.0. Yates (1960).
"Hazard of antifoam emboli from a bubble oxygenator". Thorax. 15 (1): 22–29.
doi:
10.1136/thx.15.1.22.
PMC
1018529.
PMID
13808227.
{{ cite journal}}: CS1 maint: numeric names: authors list ( link) - ^ a b c d e f C. Walton Lillehei (2008). "Historical development of cardiopulmonary bypass in Minnesota". In Glenn P. Gravlee (ed.). Cardiopulmonary Bypass: Principles and Practice (Online). Lippincott Williams & Wilkins. pp. 11–18. ISBN 978-0-7817-6815-3. Retrieved 3 February 2014.