CF-103 | |
---|---|
CF-103 mock-up at the Avro company | |
Role | Interceptor |
Manufacturer | Avro Aircraft Limited (Canada) |
Status | Cancelled December 1951 |
Primary user | Royal Canadian Air Force (intended) |
Number built | 0 |
Developed from | Avro Canada CF-100 |
The Avro Canada CF-103 was a proposed Canadian interceptor, designed by Avro Canada in the early 1950s as a development, and possible replacement of the company's CF-100 Canuck, that was entering service at the time with the Royal Canadian Air Force (RCAF). [1] Although intended to be capable of flying at transonic speeds, the CF-103 only offered a moderate increase in performance and capability over the CF-100; subsequently, the aircraft never progressed beyond the mock-up stage. [2]
Even before the prototype of the CF-100 had flown, Avro Canada was conducting studies of potential advanced variations of the aircraft, [3] as the RCAF was seeking an interceptor with greater high-speed performance. [4] Due to the perceived limitations of the CF-100's original "thick", straight wing, Chief Designer John Frost proposed a series of refinements that included a thinner swept wing. [4] In December 1950, the Avro Aircraft Design Office decided to proceed with a redesign, primarily incorporating the early series CF-100 fuselage structure with a new swept wing and tail surfaces as part of the C-100S design study. [3] [N 1]
Frost considered the new design as an interim aircraft between the CF-100 and the more advanced C-104 project. [3] The salient changes to the basic wing planform were in decreasing its chord and thickness, and adding a 42° sweep to the leading edge, creating a near- delta wing configuration. The tail surfaces were also swept back. [6] One version that was considered featured two streamlined fuel tanks blended into the leading edge of the wings near the three/quarter position. [7] [N 2]
Despite the use of more powerful engines, the redesign had very modest performance specifications, with a planned maximum diving speed of Mach 0.95, scarcely better than the placarded Mach 0.85 speed limit of the production CF-100 Mk 2 and Mk 3. [2] Avro executives, recognizing that the company had already suffered due to the protracted development of the CF-100, determined that Frost's revised design would provide a "hedge" against the CF-100's failure to secure long-term contracts. [7]
In 1951, the Canadian Department of Trade and Commerce issued an order for two prototypes and a static test airframe, under the CF-103 project designation. Jigs, tools and detailed engineering drawings were in place by June 1951, with wind tunnel testing, conducted at Cornell University, completed by November 1951. [3] Although a wooden mock-up of the CF-103 was built, along with a separate cockpit area and engine section that was partially framed in, the mock-up did not feature an undercarriage unit nor any interior fittings. [8] Two different tail designs were fitted with the initial effort only having a swept leading edge of the tail, while the definitive version had a much more raked appearance. [7] The engineering and installation requirements for the CF-103's proposed Orenda 17 jet engines were not finalized, as the experimental "hybrid" using an Orenda 8 compressor unit and Orenda 11 two-stage turbine, matched to a " reheat" unit, had not been fully developed. [N 3]
During 1951, flight tests carried out by Chief Development Test Pilot S/L Janusz Żurakowski and other members of the Flight Test unit, revealed the development potential of the CF-100 had outstripped the intended performance envelope of the CF-103, while Frost and the Design Office became preoccupied with more sophisticated designs as potential replacements for the CF-100. [5] [N 4] Work on the CF-103 stalled, with the maiden flight originally scheduled for the summer of 1952, postponed to mid-1953. [3] With Cold War pressures mounting, the Canadian government demanded that production of the latest CF-100 fighter, as well as developing more advanced variants of the Canuck should predominate, leading the Avro company to curtail the moribund CF-103 project in December 1951. [1] [N 5]
Although the mock-up languished in the experimental bay at the factory, a dramatic event served to preclude any attempt to restart the project. [12] On 18 December 1952, from a height of 33,000 ft (10,000 m), Żurakowski dived the CF-100 Mk 4 prototype (RCAF Serial No. 18112) to Mach 1.06. [6] His "unauthorized" test flight [N 6] resulted in the final scrapping of the mock-up. [14]
Data from Avro Arrow: The Story of the Avro Arrow from its Evolution to its Extinction [10]
General characteristics
Performance
Armament
Proposed
Related development
Aircraft of comparable role, configuration, and era
Related lists
CF-103 | |
---|---|
CF-103 mock-up at the Avro company | |
Role | Interceptor |
Manufacturer | Avro Aircraft Limited (Canada) |
Status | Cancelled December 1951 |
Primary user | Royal Canadian Air Force (intended) |
Number built | 0 |
Developed from | Avro Canada CF-100 |
The Avro Canada CF-103 was a proposed Canadian interceptor, designed by Avro Canada in the early 1950s as a development, and possible replacement of the company's CF-100 Canuck, that was entering service at the time with the Royal Canadian Air Force (RCAF). [1] Although intended to be capable of flying at transonic speeds, the CF-103 only offered a moderate increase in performance and capability over the CF-100; subsequently, the aircraft never progressed beyond the mock-up stage. [2]
Even before the prototype of the CF-100 had flown, Avro Canada was conducting studies of potential advanced variations of the aircraft, [3] as the RCAF was seeking an interceptor with greater high-speed performance. [4] Due to the perceived limitations of the CF-100's original "thick", straight wing, Chief Designer John Frost proposed a series of refinements that included a thinner swept wing. [4] In December 1950, the Avro Aircraft Design Office decided to proceed with a redesign, primarily incorporating the early series CF-100 fuselage structure with a new swept wing and tail surfaces as part of the C-100S design study. [3] [N 1]
Frost considered the new design as an interim aircraft between the CF-100 and the more advanced C-104 project. [3] The salient changes to the basic wing planform were in decreasing its chord and thickness, and adding a 42° sweep to the leading edge, creating a near- delta wing configuration. The tail surfaces were also swept back. [6] One version that was considered featured two streamlined fuel tanks blended into the leading edge of the wings near the three/quarter position. [7] [N 2]
Despite the use of more powerful engines, the redesign had very modest performance specifications, with a planned maximum diving speed of Mach 0.95, scarcely better than the placarded Mach 0.85 speed limit of the production CF-100 Mk 2 and Mk 3. [2] Avro executives, recognizing that the company had already suffered due to the protracted development of the CF-100, determined that Frost's revised design would provide a "hedge" against the CF-100's failure to secure long-term contracts. [7]
In 1951, the Canadian Department of Trade and Commerce issued an order for two prototypes and a static test airframe, under the CF-103 project designation. Jigs, tools and detailed engineering drawings were in place by June 1951, with wind tunnel testing, conducted at Cornell University, completed by November 1951. [3] Although a wooden mock-up of the CF-103 was built, along with a separate cockpit area and engine section that was partially framed in, the mock-up did not feature an undercarriage unit nor any interior fittings. [8] Two different tail designs were fitted with the initial effort only having a swept leading edge of the tail, while the definitive version had a much more raked appearance. [7] The engineering and installation requirements for the CF-103's proposed Orenda 17 jet engines were not finalized, as the experimental "hybrid" using an Orenda 8 compressor unit and Orenda 11 two-stage turbine, matched to a " reheat" unit, had not been fully developed. [N 3]
During 1951, flight tests carried out by Chief Development Test Pilot S/L Janusz Żurakowski and other members of the Flight Test unit, revealed the development potential of the CF-100 had outstripped the intended performance envelope of the CF-103, while Frost and the Design Office became preoccupied with more sophisticated designs as potential replacements for the CF-100. [5] [N 4] Work on the CF-103 stalled, with the maiden flight originally scheduled for the summer of 1952, postponed to mid-1953. [3] With Cold War pressures mounting, the Canadian government demanded that production of the latest CF-100 fighter, as well as developing more advanced variants of the Canuck should predominate, leading the Avro company to curtail the moribund CF-103 project in December 1951. [1] [N 5]
Although the mock-up languished in the experimental bay at the factory, a dramatic event served to preclude any attempt to restart the project. [12] On 18 December 1952, from a height of 33,000 ft (10,000 m), Żurakowski dived the CF-100 Mk 4 prototype (RCAF Serial No. 18112) to Mach 1.06. [6] His "unauthorized" test flight [N 6] resulted in the final scrapping of the mock-up. [14]
Data from Avro Arrow: The Story of the Avro Arrow from its Evolution to its Extinction [10]
General characteristics
Performance
Armament
Proposed
Related development
Aircraft of comparable role, configuration, and era
Related lists