| Anchor bend | |
|---|---|
 | |
| Names | Anchor bend, fisherman's bend |
| Category | Hitch |
| Related | Round turn and two half hitches |
| Releasing | Jamming |
| Typical use | attaching a rope to a ring or similar termination |
| ABoK | #1723, #1841 |
The anchor bend is a knot used for attaching a rope to a ring or similar termination. The name is a misnomer, as it is technically not a bend, but a hitch.
Origins
Its name originates from the time when "bend" was understood to simply mean "tie to"; today, a bend strictly refers to a knot that joins two lines.
Techniques
While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object—this will make for a one-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a strangle knot to the standing part.
See also
External links
- Grog. "Anchor Bend". Animated Knots. Retrieved May 5, 2013.
 | This knot-related article is a stub. You can help Wikipedia by expanding it. |
| Anchor bend | |
|---|---|
|
| |
| Names | Anchor bend, fisherman's bend |
| Category | Hitch |
| Related | Round turn and two half hitches |
| Releasing | Jamming |
| Typical use | attaching a rope to a ring or similar termination |
| ABoK | #1723, #1841 |
The anchor bend is a knot used for attaching a rope to a ring or similar termination. The name is a misnomer, as it is technically not a bend, but a hitch.
Origins
Its name originates from the time when "bend" was understood to simply mean "tie to"; today, a bend strictly refers to a knot that joins two lines.
Techniques
While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object—this will make for a one-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a strangle knot to the standing part.
See also
External links
- Grog. "Anchor Bend". Animated Knots. Retrieved May 5, 2013.
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
|
| This knot-related article is a stub. You can help Wikipedia by expanding it. |