Names | |
---|---|
Preferred IUPAC name
Prop-2-enyl acetate
[1] | |
Other names
2-Propenyl acetate
Allyl acetate | |
Identifiers | |
3D model (
JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.008.851 |
EC Number |
|
PubChem
CID
|
|
RTECS number |
|
UNII | |
UN number | 2333 |
CompTox Dashboard (
EPA)
|
|
| |
| |
Properties | |
C5H8O2 | |
Molar mass | 100.117 g·mol−1 |
Appearance | Colorless liquid |
Density | 0.928 g/cm3 |
Boiling point | 103 °C (217 °F; 376 K) |
slightly soluble | |
-56.7·10−6 cm3/mol | |
Hazards | |
GHS labelling: | |
Danger | |
H225, H301, H312, H319, H330 | |
P210, P233, P240, P241, P242, P243, P260, P264, P270, P271, P280, P284, P301+P310, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P337+P313, P363, P370+P378, P403+P233, P403+P235, P405, P501 | |
374 °C (705 °F; 647 K) | |
Except where otherwise noted, data are given for materials in their
standard state (at 25 °C [77 °F], 100 kPa).
|
Allyl acetate is an organic compound with formula C3H5OC(O)CH3. This colourless liquid is a precursor to especially allyl alcohol, which is a useful industrial intermediate. It is the acetate ester of allyl alcohol.
Allyl acetate is produced industrially by the gas phase reaction of propene in the presence of acetic acid using a palladium catalyst: [2] [3]
This method is advantageous because propene is inexpensive and a green chemical. Allyl alcohol is also produced primarily from allyl chloride, but production via the hydrolysis of allyl acetate route avoids the use of chlorine, and so is increasing in use.
Vinyl acetate is produced similarly, using ethylene in place of propene. These reactions are examples of acetoxylation. The palladium center is then re-oxidized by the O2 present. The mechanism for the acetoxylation follows a similar pathway, with propene forming a π-allyl bond on the palladium. [4]
Allyl acetate can be hydrolyzed to allyl alcohol:
Allyl alcohol is a precursor for some specialty polymers, mainly for drying oils. Allyl alcohol is also a precursor to synthetic glycerol. Epoxidation by hydrogen peroxide produces glycidol, which undergoes hydrolysis to glycerol.
Synthetic glycerol tends to be used in cosmetics and toiletries whereas glycerol from the hydrolysis of fats is used in food. [5]
Substitution of the acetate group in allyl acetate using hydrogen chloride yields allyl chloride. Reaction with hydrogen cyanide over copper catalyst yields allyl cyanide. [6]
Allyl chloride is generally produced directly by the chlorination of propene.
Names | |
---|---|
Preferred IUPAC name
Prop-2-enyl acetate
[1] | |
Other names
2-Propenyl acetate
Allyl acetate | |
Identifiers | |
3D model (
JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.008.851 |
EC Number |
|
PubChem
CID
|
|
RTECS number |
|
UNII | |
UN number | 2333 |
CompTox Dashboard (
EPA)
|
|
| |
| |
Properties | |
C5H8O2 | |
Molar mass | 100.117 g·mol−1 |
Appearance | Colorless liquid |
Density | 0.928 g/cm3 |
Boiling point | 103 °C (217 °F; 376 K) |
slightly soluble | |
-56.7·10−6 cm3/mol | |
Hazards | |
GHS labelling: | |
Danger | |
H225, H301, H312, H319, H330 | |
P210, P233, P240, P241, P242, P243, P260, P264, P270, P271, P280, P284, P301+P310, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P337+P313, P363, P370+P378, P403+P233, P403+P235, P405, P501 | |
374 °C (705 °F; 647 K) | |
Except where otherwise noted, data are given for materials in their
standard state (at 25 °C [77 °F], 100 kPa).
|
Allyl acetate is an organic compound with formula C3H5OC(O)CH3. This colourless liquid is a precursor to especially allyl alcohol, which is a useful industrial intermediate. It is the acetate ester of allyl alcohol.
Allyl acetate is produced industrially by the gas phase reaction of propene in the presence of acetic acid using a palladium catalyst: [2] [3]
This method is advantageous because propene is inexpensive and a green chemical. Allyl alcohol is also produced primarily from allyl chloride, but production via the hydrolysis of allyl acetate route avoids the use of chlorine, and so is increasing in use.
Vinyl acetate is produced similarly, using ethylene in place of propene. These reactions are examples of acetoxylation. The palladium center is then re-oxidized by the O2 present. The mechanism for the acetoxylation follows a similar pathway, with propene forming a π-allyl bond on the palladium. [4]
Allyl acetate can be hydrolyzed to allyl alcohol:
Allyl alcohol is a precursor for some specialty polymers, mainly for drying oils. Allyl alcohol is also a precursor to synthetic glycerol. Epoxidation by hydrogen peroxide produces glycidol, which undergoes hydrolysis to glycerol.
Synthetic glycerol tends to be used in cosmetics and toiletries whereas glycerol from the hydrolysis of fats is used in food. [5]
Substitution of the acetate group in allyl acetate using hydrogen chloride yields allyl chloride. Reaction with hydrogen cyanide over copper catalyst yields allyl cyanide. [6]
Allyl chloride is generally produced directly by the chlorination of propene.