From Wikipedia, the free encyclopedia

Alden 44
Development
Designer Niels Helleberg
Location United States
Year1976
No. built40
Builder(s) Alden Yachts/ Tillotson Pearson
Role Racer
NameAlden 44
Boat
Displacement24,500 lb (11,113 kg)
Draft8.75 ft (2.67 m), with centerboard down
Hull
Type Monohull
Construction Fiberglass
LOA44.16 ft (13.46 m)
LWL34.08 ft (10.39 m)
Beam12.50 ft (3.81 m)
Engine type Perkins Engines 4-108 diesel engine
Hull appendages
Keel/board typefin keel with centerboard
Ballast10,000 lb (4,536 kg)
Rudder(s) skeg-mounted rudder
Rig
Rig type Bermuda rig
I foretriangle height54.10 ft (16.49 m)
J foretriangle base19.30 ft (5.88 m)
P mainsail luff47.10 ft (14.36 m)
E mainsail foot14.80 ft (4.51 m)
Sails
Sailplan Cutter rigged sloop
Mainsail area348.54 sq ft (32.380 m2)
Jib/ genoa area522.07 sq ft (48.502 m2)
Total sail area870.61 sq ft (80.882 m2)
Racing
D-PN79.4
PHRF99

The Alden 44 is an American sailboat that was designed by Alden Associates and Niels Helleberg as an International Offshore Rule racer and first built in 1976. [1] [2] [3] [4]

Production

The design was built by Tillotson Pearson in the United States for Alden Yachts, but it is now out of production. [1] [4] [5]

Design

The Alden 44 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a raked stem, a raised counter reverse transom, a skeg-mounted rudder controlled by a wheel, aluminum spars and a fixed stub fin keel, with a retractable centerboard. It displaces 24,500 lb (11,113 kg) and carries 10,000 lb (4,536 kg) of lead ballast. [1] [4]

The boat has a variety of possible interior layouts, but typical is sleeping accommodation for seven people, with a double "V"-berth in the bow cabin, an L-shaped settee, with a drop-leaf table and a straight settee, plus a pilot berth in the main cabin and an aft cabin with two berths. The aft cabin has its own companionway ladder from the cockpit. The galley is located on the starboard side beside the forward companionway ladder with the double sink located underneath the steps. The galley is equipped with a propane-fired three-burner stove and oven as well as a 6 cu ft (0.17 m3) refrigerator and a 4 cu ft (0.11 m3) freezer. The large head is located just forward of the aft cabin on the port side, with access from the aft cabin and the main cabin. It includes a shower. Main cabin trim is of ash wood. [4]

Ventilation is provided by five translucent hatches and seven opening ports. [4]

For sailing the design is equipped with two winches for the main halyard, two for the genoa halyard, two for the spinnaker halyard and two for the staysail halyard, two primary and two secondary winches for the genoa sheets, two for the staysail sheets, two for the mainsheet, two for the spinnaker sheets and one for the outhaul. The majority of the installed winches are self-tailing. The design also has a topping lift. [4]

Variants

Alden 44
This cutter rig model was designed by Niels Helleberg and introduced in 1976. It was designated as Alden design #1036xx. It remained in production until 1991, with 40 examples completed. It has a length overall of 44.16 ft (13.5 m) and has a waterline length of 34.08 ft (10.4 m). The boat has a draft of 8.75 ft (2.67 m) with the centreboard extended and 4.92 ft (1.50 m) with it retracted. The boat is fitted with a Perkins Engines 4-108 diesel engine. The fuel tank holds 90 U.S. gallons (340 L; 75 imp gal) and the fresh water tank has a capacity of 160 U.S. gallons (610 L; 130 imp gal). A tall rig was also available, with a mast about 2.9 ft (0.88 m) higher. The staysail is boom-mounted. Both the staysail and its stay are removed for racing and it is sailed as a masthead sloop. The design has a PHRF racing average handicap of 99 and a Portsmouth Yardstick of 79.4. [1] [4]
Alden 44 MII
This later masthead sloop model was designed by Alden Yachts and introduced in 1981. It incorporates a different rudder and skeg configuration and moves the propeller forward, out of the skeg slot. A new interior layout was also introduced. The design has a length overall of 44.16 ft (13.5 m) and has a waterline length of 34.92 ft (10.6 m). The boat has a draft of 8.80 ft (2.68 m) with the centreboard extended and 4.90 ft (1.49 m) with it retracted. The boat is fitted with a Japanese Yanmar diesel engine. [2]

Operational history

In a 1994 review Richard Sherwood wrote, "The Alden [44] is designed for IOR competition but has many cruising amenities. The hull is moderate displacement. She is claimed to be fast, dry, stiff, and close-winded." [4]

Reviewer Steve Knauth described the design in 2014, in Soundings, "the 44 was different from the old schooners, with its cutter rig, keel/centerboard and skeg-hung rudder. Yet it was perfectly in the Alden tradition of racing/cruising yachts. The boat could handle a crew of seven — enough for a Bermuda Race — and its competitive qualities were soon apparent. The Alden 44 quickly established a reputation for bluewater racing and passagemaking." He concludes that it "remains one of the prettiest sailboats you'll see in any harbor." [6]

See also

Similar sailboats

References

  1. ^ a b c d McArthur, Bruce (2020). "Alden 44 sailboat". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  2. ^ a b McArthur, Bruce (2020). "Alden 44 MII sailboat". sailboatdata.com. Archived from the original on 1 July 2019. Retrieved 19 May 2020.
  3. ^ McArthur, Bruce (2020). "Niels Helleberg". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  4. ^ a b c d e f g h Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 376-377. Houghton Mifflin Company, 1994. ISBN  0-395-65239-1
  5. ^ McArthur, Bruce (2020). "Alden Yachts (USA)". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  6. ^ Knauth, Steve (4 August 2014). "Alden 44". Soundings. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
From Wikipedia, the free encyclopedia

Alden 44
Development
Designer Niels Helleberg
Location United States
Year1976
No. built40
Builder(s) Alden Yachts/ Tillotson Pearson
Role Racer
NameAlden 44
Boat
Displacement24,500 lb (11,113 kg)
Draft8.75 ft (2.67 m), with centerboard down
Hull
Type Monohull
Construction Fiberglass
LOA44.16 ft (13.46 m)
LWL34.08 ft (10.39 m)
Beam12.50 ft (3.81 m)
Engine type Perkins Engines 4-108 diesel engine
Hull appendages
Keel/board typefin keel with centerboard
Ballast10,000 lb (4,536 kg)
Rudder(s) skeg-mounted rudder
Rig
Rig type Bermuda rig
I foretriangle height54.10 ft (16.49 m)
J foretriangle base19.30 ft (5.88 m)
P mainsail luff47.10 ft (14.36 m)
E mainsail foot14.80 ft (4.51 m)
Sails
Sailplan Cutter rigged sloop
Mainsail area348.54 sq ft (32.380 m2)
Jib/ genoa area522.07 sq ft (48.502 m2)
Total sail area870.61 sq ft (80.882 m2)
Racing
D-PN79.4
PHRF99

The Alden 44 is an American sailboat that was designed by Alden Associates and Niels Helleberg as an International Offshore Rule racer and first built in 1976. [1] [2] [3] [4]

Production

The design was built by Tillotson Pearson in the United States for Alden Yachts, but it is now out of production. [1] [4] [5]

Design

The Alden 44 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a raked stem, a raised counter reverse transom, a skeg-mounted rudder controlled by a wheel, aluminum spars and a fixed stub fin keel, with a retractable centerboard. It displaces 24,500 lb (11,113 kg) and carries 10,000 lb (4,536 kg) of lead ballast. [1] [4]

The boat has a variety of possible interior layouts, but typical is sleeping accommodation for seven people, with a double "V"-berth in the bow cabin, an L-shaped settee, with a drop-leaf table and a straight settee, plus a pilot berth in the main cabin and an aft cabin with two berths. The aft cabin has its own companionway ladder from the cockpit. The galley is located on the starboard side beside the forward companionway ladder with the double sink located underneath the steps. The galley is equipped with a propane-fired three-burner stove and oven as well as a 6 cu ft (0.17 m3) refrigerator and a 4 cu ft (0.11 m3) freezer. The large head is located just forward of the aft cabin on the port side, with access from the aft cabin and the main cabin. It includes a shower. Main cabin trim is of ash wood. [4]

Ventilation is provided by five translucent hatches and seven opening ports. [4]

For sailing the design is equipped with two winches for the main halyard, two for the genoa halyard, two for the spinnaker halyard and two for the staysail halyard, two primary and two secondary winches for the genoa sheets, two for the staysail sheets, two for the mainsheet, two for the spinnaker sheets and one for the outhaul. The majority of the installed winches are self-tailing. The design also has a topping lift. [4]

Variants

Alden 44
This cutter rig model was designed by Niels Helleberg and introduced in 1976. It was designated as Alden design #1036xx. It remained in production until 1991, with 40 examples completed. It has a length overall of 44.16 ft (13.5 m) and has a waterline length of 34.08 ft (10.4 m). The boat has a draft of 8.75 ft (2.67 m) with the centreboard extended and 4.92 ft (1.50 m) with it retracted. The boat is fitted with a Perkins Engines 4-108 diesel engine. The fuel tank holds 90 U.S. gallons (340 L; 75 imp gal) and the fresh water tank has a capacity of 160 U.S. gallons (610 L; 130 imp gal). A tall rig was also available, with a mast about 2.9 ft (0.88 m) higher. The staysail is boom-mounted. Both the staysail and its stay are removed for racing and it is sailed as a masthead sloop. The design has a PHRF racing average handicap of 99 and a Portsmouth Yardstick of 79.4. [1] [4]
Alden 44 MII
This later masthead sloop model was designed by Alden Yachts and introduced in 1981. It incorporates a different rudder and skeg configuration and moves the propeller forward, out of the skeg slot. A new interior layout was also introduced. The design has a length overall of 44.16 ft (13.5 m) and has a waterline length of 34.92 ft (10.6 m). The boat has a draft of 8.80 ft (2.68 m) with the centreboard extended and 4.90 ft (1.49 m) with it retracted. The boat is fitted with a Japanese Yanmar diesel engine. [2]

Operational history

In a 1994 review Richard Sherwood wrote, "The Alden [44] is designed for IOR competition but has many cruising amenities. The hull is moderate displacement. She is claimed to be fast, dry, stiff, and close-winded." [4]

Reviewer Steve Knauth described the design in 2014, in Soundings, "the 44 was different from the old schooners, with its cutter rig, keel/centerboard and skeg-hung rudder. Yet it was perfectly in the Alden tradition of racing/cruising yachts. The boat could handle a crew of seven — enough for a Bermuda Race — and its competitive qualities were soon apparent. The Alden 44 quickly established a reputation for bluewater racing and passagemaking." He concludes that it "remains one of the prettiest sailboats you'll see in any harbor." [6]

See also

Similar sailboats

References

  1. ^ a b c d McArthur, Bruce (2020). "Alden 44 sailboat". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  2. ^ a b McArthur, Bruce (2020). "Alden 44 MII sailboat". sailboatdata.com. Archived from the original on 1 July 2019. Retrieved 19 May 2020.
  3. ^ McArthur, Bruce (2020). "Niels Helleberg". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  4. ^ a b c d e f g h Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 376-377. Houghton Mifflin Company, 1994. ISBN  0-395-65239-1
  5. ^ McArthur, Bruce (2020). "Alden Yachts (USA)". sailboatdata.com. Archived from the original on 19 May 2020. Retrieved 19 May 2020.
  6. ^ Knauth, Steve (4 August 2014). "Alden 44". Soundings. Archived from the original on 19 May 2020. Retrieved 19 May 2020.

Videos

Youtube | Vimeo | Bing

Websites

Google | Yahoo | Bing

Encyclopedia

Google | Yahoo | Bing

Facebook